ELEGOO ABS-Like 3.0 Resin (Grey, 1000g) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO ABS-Like 3.0 in a 1000g grey bottle is the size for trying the formula, and our reason to look at this listing is a practical one: ELEGOO says the liquid does not separate while printing or standing, so you skip the stirring step and get a consistent grey across prints. Toughness carries over from ABS-Like 2.0: prints take knocks, and ELEGOO says even drilling leaves them without cracks. Viscosity is 25-47% lower than ABS-Like 1.0, so resin flows back under the plate quickly and parts peel from the film more easily, which ELEGOO ties to higher success rates and shorter print times. Low shrinkage keeps sizes accurate, and it works on 405nm LCD, MSLA and DLP printers. No exposure times or hardness figures are given. This review is based on ELEGOO's listing text; we did not test the resin.
What stands out
- No separation, so no stirring
- 25-47% lower viscosity than ABS-Like 1.0
- Drillable without cracking
- 1000g grey trial size
Who it fits
Good fit for
Resin users who want to try a tough, drillable grey resin in a small bottle before buying 2kg.
Who should skip it
Anyone needing published hardness or heat figures; this listing has none.
Verdict: A convenient, tough grey resin to try at 1kg; skip only if you need hard numbers.
ELEGOO ABS-Like 3.0 grey 1kg, decoded
Non-separating liquid
Less stirring, even color.
25-47% lower viscosity vs 1.0
Faster flow back and easier peel.
High toughness
Survives impacts and drilling.
Low shrinkage
Accurate sizes and details.
405nm, 1000g grey
Fits most LCD/MSLA/DLP printers.
Why grey at 1kg
Grey shows detail and flaws clearly, so it is a good color to judge a new resin by. A 1kg bottle lets you dial in exposure and see how the toughness suits your parts before stocking up. ELEGOO's no-separation claim also helps occasional printers whose vat sits idle between jobs.
Getting started with ABS-Like 3.0 grey
Start from an ELEGOO ABS-like profile and print an exposure test. Wash in IPA, dry, then post-cure before drilling holes or adding screws. If the vat sat for a few days, a gentle stir does no harm even with the no-separation claim.
Before buying ELEGOO ABS-Like 3.0 1kg
Checks.
Check before you buy
- You want a 1kg trial of ELEGOO ABS-Like 3.0 before 2kg
- Your printer cures at 405nm for ABS-Like 3.0
- You can set ABS-Like 3.0 exposure without listed times
The product at a glance
ELEGOO ABS-Like 3.0 Grey Resin 1000g
Best for: Trying ABS-like resin
- Resin Type
- ABS-Like
- Curing Wavelength
- 405nm
- Compatible Technology
- MSLA, LCD, DLP
- Net Weight
- 1000g
- Features
- High Precision, Low Shrinkage
- Color
- Grey
View on Amazon: ELEGOO ABS-Like 3.0 Grey Resin 1000g Affiliate link
ELEGOO ABS-Like 3.0, grey 1000g: a tough, drillable resin that does not separate in the bottle and flows 25-47% easier than ABS-Like 1.0.
Pros
- No stirring needed
- Tough and drillable
- Trial-size bottle
Cons
- No hardness or heat data
- No exposure times
- 1kg costs more per gram
Good fit if
- You want to try a tough resin in 1kg
Skip if
- You need published hardness figures
Verdict: An easy grey tough resin to start with.
Specifications side by side
| Spec | ELEGOO ABS-Like 3.0 Grey Resin 1000g |
|---|---|
| Resin Type | ABS-Like |
| Curing Wavelength | 405nm |
| Compatible Technology | MSLA, LCD, DLP |
| Net Weight | 1000g |
| Printing Technology | DLP |
| Compatible Material | ABS |
| Features | High Precision, Low Shrinkage |
| Color | Grey |
| Size | 1KG |
| Weight | 2.2 pounds |
Frequently asked questions
Does ELEGOO ABS-Like 3.0 need stirring?
ELEGOO says it does not stratify while printing or standing, so manual stirring is reduced.
How thin is ELEGOO ABS-Like 3.0?
ELEGOO says its viscosity is 25-47% lower than ABS-Like 1.0.
Can ABS-Like 3.0 grey prints be drilled?
ELEGOO says they keep their structure without cracks even under drilling.
Is ABS-Like 3.0 compatible with my printer?
It fits LCD and DLP printers that use 405nm UV light.
See also
- elegoo water washable resin 2 0 grey 1kg review
- elegoo saturn 3 ultra 12k msla 3d printer review
- sainsmart pa6 nylon filament white 1kg review
- elegoo standard maroon resin review
- elegoo abs like 3 0 grey 2kg bottle review
- ELEGOO Water Washable Resin 2000g Review (2026): A Spec-Based Look
- ELEGOO Plant-Based Standard Resin Black 2000g Review (2026)
- ELEGOO Standard Resin 2.0 Black 1000g Review (2026)
- elegoo saturn 3 12k resin 3d printer review
- wusthof wusthof gourmet grey 3 review
