Best Shion.Kwoo 3D Printer Build Plates in 2026: 7 Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Every Shion.Kwoo 3D printer accessory we found is a spring steel build plate, sold in sizes for a long list of printers, so the real choice is your bed size and then the surface. Our top pick is the 257×257mm plate for Bambu Lab printers: both faces are spray-coated textured PEI rated to 300°C, it carries an identification code, and it fits the X1 series, P1P, P1S, P2S, X2D and A1. The other picks cover the Prusa Core One and MK3/MK4 bed, the QIDI Plus 4 and other 310mm beds, the Bambu H2D and H2S, the Snapmaker U1, and two big Creality beds (K2 Plus and Ender 5 Max). Several titles omit the Shion.Kwoo name; the brand comes from the product record. Picks and notes come from the listings and published specs, not from our own printing.
Our top pick: Shion.Kwoo 257x257mm Double-Sided Textured PEI Plate.
Quick picks
Our 7 picks
Shion.Kwoo 257x257mm Double-Sided Textured PEI Plate
Best for: Bambu Lab 257mm beds
- Primary Material
- Stainless spring steel
- Dimensions
- 257x257 mm
- Maximum Temperature
- 300°C
- Build Surface Type
- Textured PEI
- Build Plate Material
- PEI, Spring Steel
- Build Plate Size
- 257x257mm
View on Amazon: Shion.Kwoo 257x257mm Double-Sided Textured PEI Plate Affiliate link
Shion.Kwoo 257×257mm plate for Bambu Lab X1/P1/P2S/X2D/A1: textured PEI on both sides, rated to 300°C, identification code, no magnetic base; listed for PLA, PETG, ABS and PC.
Pros
- Two textured PEI faces
- Takes ABS and PC
- Identification code on the plate
Cons
- No smooth face
- Magnetic base not included
Good fit if
- You run a Bambu P1S and want a Shion.Kwoo textured spare
Skip if
- You want a smooth glossy bottom from Shion.Kwoo
Verdict: Two hard-wearing PEI faces for the common Bambu bed.
Shion.Kwoo 254x241mm Smooth PET and Textured PEI Plate
Best for: Prusa Core One, MK4
- Primary Material
- stainless spring steel
- Dimensions
- 254x241mm
- Build Surface Type
- Smooth PET, textured PEI
- Build Plate Material
- PEI, Spring Steel
View on Amazon: Shion.Kwoo 254x241mm Smooth PET and Textured PEI Plate Affiliate link
Shion.Kwoo 254×241mm PET/PEI plate: carbon-fiber PET face for PLA and PETG, gold textured PEI face rated 300°C, 0.4mm spring steel; lists Core One, MK4, MK3S+, MK3, MK2.5 and Aquila Pro.
Pros
- Fits Core One and MK4
- PET plus PEI choice
- 0.4mm steel
Cons
- PET face not for ABS
- No magnetic base
Good fit if
- You own a Prusa Core One or MK4 and want a Shion.Kwoo spare
Skip if
- Your Shion.Kwoo plate must take ABS on both faces
Verdict: A two-surface spare for Prusa-size beds.
Shion.Kwoo 355x346mm PET PEI Build Plate
Best for: Bambu H2D, H2S
- Primary Material
- Stainless spring steel
- Dimensions
- 355x346 mm
- Build Surface Type
- Smooth PET, textured PEI
- Color
- Black
- Build Plate Material
- PEI, Spring Steel
View on Amazon: Shion.Kwoo 355x346mm PET PEI Build Plate Affiliate link
Shion.Kwoo 355×346mm plate for Bambu Lab H2D and H2S: carbon-fiber PET face and gold textured PEI face, 0.4mm spring steel, magnetic base not included.
Pros
- Sized for the H2D bed
- PEI face rated 300°C
- Carbon-fiber PET finish
Cons
- H2D/H2S only
- Pricier than small plates
Good fit if
- You need a second H2D plate in Shion.Kwoo PET/PEI
Skip if
- You own a 257mm Bambu bed rather than an H2D
Verdict: A large Bambu spare with two finishes.
Shion.Kwoo Snapmaker U1 Dual PEO PEI Plate
Best for: Snapmaker U1
- Primary Material
- stainless spring steel
- Dimensions
- 276x293mm
- Build Surface Type
- Smooth PET, textured PEI
- Compatible Material
- PLA, PETG, ABS, TPU
- Features
- Carbon Fiber
- Build Plate Material
- PEI, PEO
View on Amazon: Shion.Kwoo Snapmaker U1 Dual PEO PEI Plate Affiliate link
Shion.Kwoo 276×293mm plate for Snapmaker U1: title says PEO and PEI, bullets describe carbon-fiber PET plus gold textured PEI rated 300°C; listed for PLA, PETG, TPU, ABS and PC.
Pros
- Made for the U1 bed
- PEI face for ABS and PC
- Spring steel flex release
Cons
- Surface name conflicts
- No magnetic base
Good fit if
- Your Snapmaker U1 needs a Shion.Kwoo PET/PEI plate
Skip if
- You need certainty about a PEO face on the Shion.Kwoo U1 plate
Verdict: A U1 spare with a naming mix-up.
Qidi Plus 4 Build Plate Spring Steel PEI Sheet 310x310mm with Magnetic Base | Smooth/Textured PET+ PEI for CR-10S/10 S3/CR-10S pro/CR-10V2 V3/CR-X/CR-X Pro/Artillery Sidewinder SW X1/X2/Anet A8 Plus
Best for: QIDI Plus 4, CR-10
- Build Plate Material
- PEI, Spring Steel
- Surface Finish
- Smooth, Textured
Shion.Kwoo 310×310mm PET+PEI plate: carbon-fiber PET face rated 120°C for PLA and PETG, matte PEI face rated 300°C for ABS; lists QIDI Plus 4, CR-10 family, Sidewinder X1/X2, Anet A8 Plus; title mentions a magnetic base.
Pros
- Fits many 310mm printers
- PEI face for ABS
- Magnetic base named in title
Cons
- PET face only to 120°C
- Base not confirmed in bullets
Good fit if
- You run a QIDI Plus 4 or CR-10 with a Shion.Kwoo 310mm plate
Skip if
- You print ABS on the PET side of the Shion.Kwoo 310mm sheet
Verdict: A 310mm plate that covers a long printer list.
Shion.Kwoo K2 Plus 370x370mm Smooth PEO/PET Plate
Best for: Creality K2 Plus
- Primary Material
- stainless spring steel
- Dimensions
- 370x370mm
- Build Surface Type
- PET carbon-fiber, PEO diamond
- Compatible Material
- PLA, PETG, TPU
- Build Plate Material
- Spring Steel, PEO
- Surface Finish
- Smooth
View on Amazon: Shion.Kwoo K2 Plus 370x370mm Smooth PEO/PET Plate Affiliate link
Shion.Kwoo 370×370mm PET/PEO plate for Creality K2 Plus: carbon-fiber PET face and diamond PEO face, 0.4mm spring steel, for PLA, PETG and TPU.
Pros
- Two decorative patterns
- Sized for K2 Plus
- Flex release
Cons
- No PEI face
- Not for ABS
Good fit if
- Your K2 Plus prints PLA and PETG on a Shion.Kwoo patterned plate
Skip if
- Your K2 Plus runs ABS on a Shion.Kwoo sheet
Verdict: A patterned K2 Plus plate for low-temp filaments.
Shion.Kwoo 415x430mm PET PEO Build Plate
Best for: Creality Ender 5 Max
- Primary Material
- Stainless spring steel
- Dimensions
- 415x430mm
- Build Surface Type
- PET carbon-fiber, PEO diamond
- Compatible Material
- PLA, PETG, TPU
- Build Plate Material
- Spring Steel, PEO
- Surface Finish
- Smooth
View on Amazon: Shion.Kwoo 415x430mm PET PEO Build Plate Affiliate link
Shion.Kwoo 415×430mm PET/PEO plate for Creality Ender 5 Max: carbon-fiber PET face and diamond PEO face, 0.4mm spring steel, for PLA, PETG and TPU; magnetic base not included.
Pros
- Covers the largest bed here
- Two pattern finishes
- Spring steel release
Cons
- No PEI face
- Ender 5 Max only
Good fit if
- Your Ender 5 Max needs a Shion.Kwoo 415×430mm spare
Skip if
- You want ABS adhesion from a Shion.Kwoo PEO sheet
Verdict: A big-bed plate for PLA and PETG.
Specifications side by side
| Spec | Shion.Kwoo 257x257mm Double-Sided Textured PEI Plate | Shion.Kwoo 254x241mm Smooth PET and Textured PEI Plate | Shion.Kwoo 355x346mm PET PEI Build Plate | Shion.Kwoo Snapmaker U1 Dual PEO PEI Plate | Qidi Plus 4 Build Plate Spring Steel PEI Sheet 310x310mm with Magnetic Base | Smooth/Textured PET+ PEI for CR-10S/10 S3/CR-10S pro/CR-10V2 V3/CR-X/CR-X Pro/Artillery Sidewinder SW X1/X2/Anet A8 Plus | Shion.Kwoo K2 Plus 370x370mm Smooth PEO/PET Plate | Shion.Kwoo 415x430mm PET PEO Build Plate |
|---|---|---|---|---|---|---|---|
| Primary Material | Stainless spring steel | stainless spring steel | Stainless spring steel | stainless spring steel | not stated | stainless spring steel | Stainless spring steel |
| Dimensions | 257x257 mm | 254x241mm | 355x346 mm | 276x293mm | not stated | 370x370mm | 415x430mm |
| Maximum Temperature | 300°C | not stated | not stated | not stated | not stated | not stated | not stated |
| Build Surface Type | Textured PEI | Smooth PET, textured PEI | Smooth PET, textured PEI | Smooth PET, textured PEI | not stated | PET carbon-fiber, PEO diamond | PET carbon-fiber, PEO diamond |
| Compatible Material | not stated | not stated | not stated | PLA, PETG, ABS, TPU | not stated | PLA, PETG, TPU | PLA, PETG, TPU |
| Features | not stated | not stated | not stated | Carbon Fiber | not stated | Carbon Fiber | Carbon Fiber |
| Color | Gold | PET+PEI | Black | Gold | Gold | not stated | not stated |
| Build Plate Material | PEI, Spring Steel | PEI, Spring Steel | PEI, Spring Steel | PEI, PEO | PEI, Spring Steel | Spring Steel, PEO | Spring Steel, PEO |
| Build Plate Size | 257x257mm | not stated | not stated | not stated | not stated | not stated | not stated |
| Surface Finish | Textured | Smooth, Textured | Smooth, Textured | Smooth, Textured | Smooth, Textured | Smooth | Smooth |
| Weight | 8.8 ounces | not stated | not stated | not stated | not stated | not stated | not stated |
| Size | 257x257mm-pei | 254x241 | 355x346 | 276X293 | 310x310mm | 370x370mm | 415x430mm |
| Model | x1-2 | not stated | not stated | not stated | not stated | not stated | not stated |
Shion.Kwoo plates by surface
Shion.Kwoo builds three kinds of plate. Gold textured PEI (rated to 300°C at the material level) handles PLA, PETG, ABS and PC; the Bambu 257mm plate has it on both faces. PET+PEI plates pair a carbon-fiber PET face for PLA and PETG with that textured PEI on the back: the Prusa, H2D, Snapmaker U1 and QIDI Plus 4 picks use this layout, with the QIDI page rating its PET face to 120°C. PET+PEO plates (K2 Plus, Ender 5 Max) carry a carbon-fiber pattern on one side and a diamond pattern on the other, and are limited to PLA, PETG and TPU. Most use 0.4mm stainless spring steel; only the QIDI title mentions a magnetic base, while the others state it is not included.
Who Shion.Kwoo plates suit
Choose the Bambu 257mm plate if you want two textured PEI faces that both take ABS and PC. Choose the Prusa Core One plate if you own a Core One, MK4 or MK3S+ and want one smooth-looking PET face plus a PEI face. Choose the H2D plate if your Bambu H2D or H2S needs a spare with the same split. Choose the K2 Plus or Ender 5 Max plate only if your printing is PLA, PETG and TPU, since neither has a PEI face. Choose the QIDI Plus 4 plate if you run a 310mm bed such as the CR-10 or Sidewinder X1/X2 as well as the Plus 4.
Choosing a Shion.Kwoo plate
-
Measure the bed before ordering a Shion.Kwoo plate
Plates run from 254×241mm to 415×430mm, and some titles cover several printers with the same size.
-
Use the Shion.Kwoo PEI face for ABS and PC
PET and PEO faces are listed for PLA and PETG (plus TPU on the PEO plates), not for hot engineering filaments.
-
Let a Shion.Kwoo plate cool before flexing
The listings ask you to wait for room temperature, then bend the plate to release parts.
-
Clean Shion.Kwoo surfaces with IPA or soap
They suggest 70-75% isopropyl alcohol or mild soapy water, dried fully before printing.
Frequently asked questions
What is the best Shion.Kwoo build plate?
For Bambu Lab owners, the 257mm double-sided textured PEI plate; both faces are rated to 300°C.
Does the Shion.Kwoo plate include a magnetic base?
Most listings say no. The QIDI Plus 4 / 310mm title mentions a magnetic base, but its bullets do not confirm it.
Which Shion.Kwoo plate fits the Prusa Core One?
The 254×241mm PET/PEI plate, which also lists the MK4, MK3S+, MK3 and MK2.5.
Is the Shion.Kwoo Snapmaker U1 plate PEO or PET?
The title says PEO and PEI, while every bullet describes a carbon-fiber PET face and textured PEI.
Can I print ABS on the Shion.Kwoo K2 Plus plate?
Its listing names PLA, PETG and TPU only; neither the PET nor the PEO face is pitched for ABS.






