As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Best Castable 3D Printer Resins in 2026: 5 Picks Compared

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Castable resin prints a pattern that burns out of an investment mold before metal is poured, so wax content and ash matter more than color. Our top pick is Siraya Tech Cast in purple: it contains wax for easier burnout, prints without special room conditions and costs far less than lab resins. HeyGears PAC10 has the best numbers (70-80% wax, 0.02% ash) but needs a Reflex printer and add-on kit; Antinsky's 0.5kg resin publishes a full datasheet; JAMG HE has the tightest shrinkage; and Antinsky Smart comes in 1kg for labs. We used listings and published specs only.

Our top pick: Siraya Tech Cast 1kg Castable Resin.

Quick picks

#ProductBest forPrice
1 Siraya Tech Cast 1kg Castable Resin Best overall Best overall Check price of Siraya Tech Cast 1kg Castable Resin on Amazon
2 HeyGears PAC10 Wax Casting Resin 1KG Best premium Best premium Check price of HeyGears PAC10 Wax Casting Resin 1KG on Amazon
3 Antinsky Castable Dental Resin 3D Printer, 40% Wax, Clean Burnout, 0.5KG | Easy Casting for Dental implant Restoration Frame & Crown, Ash below 0.5%, 0.85-1.05% low shrinkage, 36-52MPa tensile Most documented Most documented Check price of Antinsky Castable Dental Resin 3D Printer, 40% Wax, Clean Burnout, 0.5KG | Easy Casting for Dental implant Restoration Frame & Crown, Ash below 0.5%, 0.85-1.05% low shrinkage, 36-52MPa tensile on Amazon
4 JH JAMG HE Dental Castable Resin 500g Lowest shrinkage Lowest shrinkage Check price of JH JAMG HE Dental Castable Resin 500g on Amazon
5 Antinsky Castable Dental Resin 1kg Best 1kg for dental labs Best 1kg for dental labs Check price of Antinsky Castable Dental Resin 1kg on Amazon

The best fit for you

Our 5 picks

Best overall

Siraya Tech Cast 1kg Castable Resin

Best for: Best overall

Resin Type
Castable (what this guide is about)
Curing Wavelength
405nm
Compatible Technology
LCD, DLP
Net Weight
1000g
Application
Jewelry, rings, pendants, metal parts
Printing Technology
Resin

View on Amazon: Siraya Tech Cast 1kg Castable Resin Affiliate link

Siraya Tech Cast, purple 1kg: a wax-containing castable resin that burns out more easily than wax-free casting resins, needs no very dry room or additive, sticks well to the plate, and was developed with jewelers for rings and pendants.

Pros

  • Forgiving to print
  • Wax content eases burnout
  • 1kg at a hobby-friendly price

Cons

  • Wax percentage and ash figure not given
  • Purple color makes very fine detail harder to inspect

Good fit if

  • You cast rings and pendants
  • You are new to castable resin

Skip if

  • You need a published ash value for lab records

Verdict: The approachable castable resin for jewelry work.

Best premium

HeyGears PAC10 Wax Casting Resin 1KG

Best for: Best premium

Resin Type
Castable (what this guide is about)
Net Weight
1KG
Application
Jewelry and precious metal casting
Printing Technology
Resin

View on Amazon: HeyGears PAC10 Wax Casting Resin 1KG Affiliate link

HeyGears PAC10 Wax Casting resin, violet 1kg: 70-80% wax with 0.02% ash, ±0.03 mm tolerance and 0.12 mm minimum walls; for Reflex, Reflex Turbo, Reflex 2 and Reflex 2 Pro, and it needs the UltraCraft Reflex Pulsing Release Module Kit.

Pros

  • Highest wax content here
  • 0.02% ash
  • 0.12 mm walls

Cons

  • About four times the price of Siraya Tech Cast
  • Reflex printers plus an extra kit only

Good fit if

  • You run a HeyGears Reflex for precious-metal jewelry
  • You need the cleanest burnout

Skip if

  • You own another printer brand

Verdict: Top-tier burnout numbers, locked to one printer family.

Most documented

Antinsky Castable Dental Resin 3D Printer, 40% Wax, Clean Burnout, 0.5KG | Easy Casting for Dental implant Restoration Frame & Crown, Ash below 0.5%, 0.85-1.05% low shrinkage, 36-52MPa tensile

Best for: Most documented

Resin Type
Castable (what this guide is about)
Printing Technology
Resin
Features
Low Shrinkage

View on Amazon: Antinsky Castable Dental Resin 3D Printer, 40% Wax, Clean Burnout, 0.5KG | Easy Casting for Dental implant Restoration Frame & Crown, Ash below 0.5%, 0.85-1.05% low shrinkage, 36-52MPa tensile Affiliate link

Antinsky Castable Dental resin, 0.5kg: up to 40% wax, under 0.5% ash after burnout, 0.85-1.05% linear shrinkage, Shore 81D, 80-150 cps and 36-52 MPa tensile strength, for 395-405nm LCD and DLP printers.

Pros

  • Full datasheet in the listing
  • Works with gypsum investment
  • Sturdy patterns at 81D

Cons

  • Only 0.5kg
  • Low stock

Good fit if

  • You cast crowns, bridges or implant parts
  • You want numbers to set up burnout cycles

Skip if

  • You print big jewelry batches

Verdict: The best-specified castable resin in this group.

Lowest shrinkage

JH JAMG HE Dental Castable Resin 500g

Best for: Lowest shrinkage

Resin Type
Castable (what this guide is about)
Curing Wavelength
405nm
Compatible Technology
LCD, DLP
Net Weight
500g
Application
Dental crowns, frames, restorations
Printing Technology
Resin

View on Amazon: JH JAMG HE Dental Castable Resin 500g Affiliate link

JAMG HE Dental Castable, 500g: 0.85-1.0% shrinkage, an ash-free casting claim, and 405nm compatibility with LCD RGB, mono and DLP printers, aimed at crowns and frameworks.

Pros

  • Tightest shrinkage range listed
  • Ash-free claim
  • 405nm LCD and DLP

Cons

  • No wax content given
  • Small bottle

Good fit if

  • You cast dental frames
  • Fit matters more than price

Skip if

  • You want a 1kg bottle

Verdict: A small dental bottle with tight shrinkage.

Best 1kg for dental labs

Antinsky Castable Dental Resin 1kg

Best for: Best 1kg for dental labs

Resin Type
Castable (what this guide is about)
Curing Wavelength
405nm
Compatible Technology
LCD, DLP
Net Weight
1kg
Application
Crown, bridge and framework patterns
Printing Technology
Resin

View on Amazon: Antinsky Castable Dental Resin 1kg Affiliate link

ANTINSKY Castable Dental Smart resin, green 1kg: 30-40% wax for burnout in investment casting, green for easy inspection of margins, and 405nm LCD and DLP support for crown, bridge and framework patterns.

Pros

  • 1kg for repeat lab batches
  • Green helps inspect fine edges
  • 30-40% wax

Cons

  • Low stock
  • No ash or shrinkage figure

Good fit if

  • You print many crown patterns a week
  • You inspect margins under magnification

Skip if

  • You need full test data

Verdict: Lab-sized castable resin with an inspection-friendly color.

Specifications side by side

Spec Siraya Tech Cast 1kg Castable Resin HeyGears PAC10 Wax Casting Resin 1KG Antinsky Castable Dental Resin 3D Printer, 40% Wax, Clean Burnout, 0.5KG | Easy Casting for Dental implant Restoration Frame & Crown, Ash below 0.5%, 0.85-1.05% low shrinkage, 36-52MPa tensile JH JAMG HE Dental Castable Resin 500g Antinsky Castable Dental Resin 1kg
Resin Type Castable Wax Casting not stated Castable Castable Dental
Curing Wavelength 405nm not stated not stated 405nm 405nm
Compatible Technology LCD, DLP not stated not stated LCD, DLP LCD, DLP
Net Weight 1000g 1KG not stated 500g 1kg
Application Jewelry, rings, pendants, metal parts Jewelry and precious metal casting not stated Dental crowns, frames, restorations Crown, bridge and framework patterns
Printing Technology Resin Resin Resin Resin Resin
Features not stated not stated Low Shrinkage High Precision, Low Shrinkage Low Shrinkage
Size 1KG not stated not stated 500G not stated
Dimensions 5.91 × 5.12 × 8.27 inches not stated not stated not stated not stated
Weight not stated not stated not stated 1.1 pounds not stated
Color Purple 1000g not stated not stated not stated not stated

Choosing a castable resin

  1. Red wax is a color, not a casting resin

    Some standard resins are sold in a red wax shade; only buy resin that states burnout or casting use.

  2. Check ash

    PAC10 lists 0.02% and Antinsky under 0.5%; the others give no figure or claim ash-free.

  3. Match investment

    Antinsky names gypsum investment; ask your caster which investment and cycle they use.

  4. Printer lock-in

    PAC10 needs a Reflex printer plus the pulsing release kit.

Frequently asked questions

Which castable resin has the most wax?

HeyGears PAC10, at 70-80% wax.

Can I cast jewelry with dental castable resin?

The dental resins list crown and framework use; Siraya Tech Cast and PAC10 name jewelry directly.

Is Siraya Tech Cast fussy about room humidity?

Siraya Tech says it needs no very dry environment or additive.

Which castable resin shrinks least?

JAMG HE lists 0.85-1.0%; Antinsky 0.5kg lists 0.85-1.05%.

See also