ELEGOO Plant-Based Standard Resin Black 2000g Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO's Plant-Based Standard Resin in black (EL-3D-A124) is a soybean-based, non-BPA resin sold here in a 2000g bottle. Its main selling point is smell: ELEGOO calls the odor ultra-low with barely any pungent fumes, which matters if you print in a home office or spare room. It cures at 405nm like almost every LCD/MSLA printer, including ELEGOO's own Mars, Saturn and Jupiter lines. ELEGOO also claims lower brittleness than typical standard resin and shrinkage as low as 3.72%, but gives no exposure times, viscosity or tensile figures, so you will need to run a calibration print. Black is a good finish for parts you will display unpainted, though it hides fine detail in photos and on screen while you check supports. Low odor does not mean safe to touch: ELEGOO still advises gloves and a mask. This review is drawn from ELEGOO's listing; no prints were made for it.
What stands out
- Soybean-based, non-BPA
- Ultra-low odor per ELEGOO
- Shrinkage down to 3.72%
- 2000g bottle, 405nm
Who it fits
Good fit for
Resin printers working indoors who want a milder smell and print enough miniatures or display parts to use 2kg of one color.
Who should skip it
Anyone who needs engineering properties such as heat resistance or flex, or who paints most prints and would see detail better in grey.
Verdict: A low-odor everyday resin in a big bottle; you will need to dial in exposure yourself.
ELEGOO plant-based black resin specs
Soybean base, non-BPA
The reason for the low odor claim.
Shrinkage as low as 3.72%
ELEGOO's figure for dimensional accuracy.
405nm curing
Works on standard LCD/MSLA printers.
2000g, black (EL-3D-A124)
Also sold in grey, white and translucent, and in 1000g.
Exposure settings, viscosity
Not stated; calibrate.
Black or another color
The same plant-based resin comes in grey, white and translucent. Choose black for finished-looking display pieces and parts that will not be painted. Choose grey if you paint miniatures, because surface detail and layer lines are easier to judge before priming. Choose the 1000g bottle instead of 2000g if you print rarely, since opened resin slowly settles and needs shaking.
Handling and storage
ELEGOO packs the bottle in a PE bag inside a bubble bag, so a crack in transit should not leak. Store it away from sunlight and dust, shake it before pouring, and wear gloves and a mask; ELEGOO says to wash skin contact with plenty of soapy water at once. Lower odor makes long sessions easier but cured and uncured resin still need washing and curing as usual.
Before ordering ELEGOO plant-based black
A few checks for this ELEGOO resin.
Check before you buy
- Your printer cures at 405nm
- You will use 2kg of black ELEGOO resin
- You can calibrate ELEGOO plant-based exposure yourself
The product at a glance
ELEGOO Plant-Based Black Resin 2000g
Best for: Low-odor indoor resin printing
- Resin Type
- Plant-Based
- Curing Wavelength
- 405nm
- Compatible Technology
- MSLA, DLP, LCD
- Net Weight
- 2000g
- Application
- Board game miniatures
- Printing Technology
- Resin
View on Amazon: ELEGOO Plant-Based Black Resin 2000g Affiliate link
ELEGOO soybean-based black resin, 2000g, non-BPA and low odor, 405nm, shrinkage from 3.72%.
Pros
- Milder smell than typical resin
- Low shrinkage figure
- Large 2kg bottle
Cons
- No exposure settings listed
- Black hides detail when painting
Good fit if
- You print in living space
- You make display pieces
Skip if
- You need tough engineering resin
Verdict: A sensible low-odor standard resin for indoor printing.
Specifications side by side
| Spec | ELEGOO Plant-Based Black Resin 2000g |
|---|---|
| Resin Type | Plant-Based |
| Curing Wavelength | 405nm |
| Compatible Technology | MSLA, DLP, LCD |
| Net Weight | 2000g |
| Application | Board game miniatures |
| Printing Technology | Resin |
| Features | High Precision, Low Odor |
| Color | Black |
| Size | L-2000g |
| Model | EL-3D-A124 |
Frequently asked questions
Is ELEGOO plant-based resin odorless?
ELEGOO says ultra-low odor with barely any pungent fumes, not odorless.
Does ELEGOO plant-based black resin work on non-ELEGOO printers?
Yes, on most printers that cure at 405nm, which covers typical LCD/MSLA machines.
How much does the black ELEGOO plant-based resin shrink?
ELEGOO quotes as low as 3.72%.
Do I still need gloves with ELEGOO plant-based resin?
Yes. ELEGOO recommends gloves and a mask every time.
Featured in
See also
- elegoo standard resin 2 0 black 1000g review
- elegoo abs like ultra resin neon peach 1000g review
- siraya tech blu lava PC like resin black 1kg review
- elegoo standard maroon resin review
- elegoo abs like 3 0 grey 2kg bottle review
- ELEGOO Water Washable Resin 2000g Review (2026): A Spec-Based Look
- ELEGOO ABS-Like 3.0 Pro Resin (Black, 2000g) Review (2026)
- ELEGOO ABS-Like 3.0 Resin (Grey, 1000g) Review (2026)
- best ELEGOO 3d printers
- unxuey 50pcs 3d printer heatsink review
