As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

SainSmart PA6 Nylon Filament (White, 1kg) Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

SainSmart's PA6 nylon is an engineering filament for parts that must be tough, and the reason this white 1kg spool stands out is that SainSmart is upfront about what it needs: full settings of 220-280°C at the nozzle, an 80-100°C bed and 30-70mm/s, a filament dryer because PA6 absorbs moisture, and PVA glue on the bed every time. In return it offers good strength, heat resistance, excellent impact resistance and low warping for nylon, aimed at car parts, mechanical parts and protective shells. Diameter tolerance is ±0.04mm, looser than the ±0.02mm common on PLA. The spool is cardboard, which suits dryers and recycling. SainSmart names Creality, Prusa MK3, Monoprice, FlashForge and QIDI printers as compatible, but a hotend that reaches the upper range helps. Our notes draw on SainSmart's listing alone, with no printed parts.

What stands out

  • 220-280°C nozzle, 80-100°C bed, 30-70mm/s
  • Strong, impact and heat resistant
  • Low warp for nylon
  • Cardboard 1kg spool

Who it fits

Good fit for

Makers with an all-metal hotend and a filament dryer who need tough nylon parts such as gears, brackets and car clips.

Who should skip it

Owners of stock PTFE-lined hotends or anyone without a dryer; PA6 will string, bubble or fail to stick.

Verdict: A well-documented PA6 for engineering parts, if your printer and workflow can handle nylon.

SainSmart PA6 nylon, by the numbers

220-280°C nozzle

The upper end needs an all-metal hotend.

80-100°C bed

A hot bed plus PVA glue for adhesion.

30-70mm/s

Slow and steady, typical for nylon.

±0.04mm on 1.75mm

Looser tolerance than most PLA.

Model 101-90-PA6WT

SainSmart's code for white ePA6.

What PA6 is good at

PA6 nylon trades easy printing for toughness: it flexes instead of shattering, holds up to heat better than PLA or PETG, and wears well in moving parts. SainSmart pitches it at car parts, mechanical parts and protective shells. White prints can be dyed, but the listing does not mention it, so treat that as optional.

Printing SainSmart PA6

Dry the spool before printing and feed it from a dryer during long jobs; SainSmart says the filament is moisture sensitive. Coat the bed with PVA glue, which SainSmart says is always required, and heat it to 80-100°C. Start in the middle of the 220-280°C range and slow down to 30-70mm/s. An enclosure helps keep larger parts from lifting.

Before buying SainSmart PA6 nylon

Checks.

Check before you buy

  • Your hotend handles up to 280°C for SainSmart PA6
  • You own a filament dryer for the PA6 spool
  • You have PVA glue for SainSmart nylon bed prep

The product at a glance

SainSmart PA6 Nylon Filament 1.75mm

Best for: Tough mechanical parts

Material Type
PA6
Filament Diameter
1.75mm
Net Weight
1kg
Max Print Speed
70mm/s
Dimensional Accuracy
+/- 0.04 mm
Printing Technology
FDM

View on Amazon: SainSmart PA6 Nylon Filament 1.75mm Affiliate link

SainSmart PA6 nylon, white 1kg: tough engineering filament with full settings (220-280°C, 80-100°C bed, 30-70mm/s), low warp, but a dryer and PVA glue are required.

Pros

  • Full print settings listed
  • Tough and impact resistant
  • Cardboard spool

Cons

  • Needs a dryer and PVA glue
  • ±0.04mm tolerance
  • Upper temps need an all-metal hotend

Good fit if

  • You print gears, clips or car parts

Skip if

  • Your hotend tops out below 280°C for nylon

Verdict: A solid nylon for those set up to print it.

Specifications side by side

Spec SainSmart PA6 Nylon Filament 1.75mm
Material Type PA6
Filament Diameter 1.75mm
Net Weight 1kg
Max Print Speed 70mm/s
Dimensional Accuracy +/- 0.04 mm
Printing Technology FDM
Compatible Material Nylon
Color White
Weight 2.2 pounds
Size ePA6
Model 101-90-PA6WT

Frequently asked questions

What temperature does SainSmart PA6 print at?

Nozzle 220-280°C, bed 80-100°C, at 30-70mm/s.

Does SainSmart PA6 need a dryer?

Yes, SainSmart says PA6 is moisture sensitive and should be used with a filament dryer.

Do I need glue for SainSmart nylon?

SainSmart says PVA glue is always required for good adhesion.

What is SainSmart PA6 used for?

Durable car parts, mechanical parts and protective shells.

See also