Best Resin 3D Printers with ACF Film in 2026: 5 Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ACF (anti-cutting or composite) release film sits under the resin vat in place of plain FEP and lowers the pull on each layer as it lifts, which is why makers pair it with faster resin printing. These printers ship with it fitted. Our top pick is the ELEGOO Saturn 3 Ultra: a 10-inch 12K screen at 19 x 24µm, a 218.88 x 122.88 x 260mm build volume, Wi-Fi transfer and ELEGOO's ACF liner in the vat, at a mid-range price. The ANYCUBIC Photon Mono 4 Ultra is the 7-inch pick with a 120mm/h top speed, the ELEGOO Mars 4 Ultra is the cheapest way in, the Creality Halot-X1 Combo brings 16K detail, and Phrozen's Sonic Mega 8K S covers batch production. All five are compared from maker listings and spec sheets; none was run by us.
Our top pick: ELEGOO Saturn 3 Ultra 12K Resin Printer.
Quick picks
| # | Product | Best for | Price |
|---|---|---|---|
| 1 | ELEGOO Saturn 3 Ultra 12K Resin Printer Best overall | Most resin projects | Check price of ELEGOO Saturn 3 Ultra 12K Resin Printer on Amazon |
| 2 | ANYCUBIC Photon Mono 4 Ultra 10K Resin Printer Best 7-inch value | Fast miniatures | Check price of ANYCUBIC Photon Mono 4 Ultra 10K Resin Printer on Amazon |
| 3 | ELEGOO Mars 4 Ultra 9K Resin 3D Printer Best budget | Budget entry | Check price of ELEGOO Mars 4 Ultra 9K Resin 3D Printer on Amazon |
| 4 | Creality Halot-X1 Combo 16K Resin Printer Best 16K detail | 16K detail | Check price of Creality Halot-X1 Combo 16K Resin Printer on Amazon |
| 5 | Phrozen Sonic Mega 8K S Resin 3D Printer Best large format | Batch production | Check price of Phrozen Sonic Mega 8K S Resin 3D Printer on Amazon |
The best fit for you
- You want one ACF printer for most resin work ELEGOO Saturn 3 Ultra 12K Resin Printer 10-inch 12K screen, 260mm Z height and Wi-Fi.
- You print miniatures and want speed on a 7-inch screen ANYCUBIC Photon Mono 4 Ultra 10K Resin Printer 10K at 17µm, up to 120mm/h, five print checks.
- You want the lowest-cost ACF printer ELEGOO Mars 4 Ultra 9K Resin 3D Printer 7-inch 9K at 18µm with Wi-Fi and 4-point leveling.
- You want the finest pixels and resin automation Creality Halot-X1 Combo 16K Resin Printer 16K at 14 x 19µm, resin heating, RFID resin loading.
- You print production batches Phrozen Sonic Mega 8K S Resin 3D Printer 15-inch 8K screen and a 33 x 18.5 x 30cm volume.
Our 5 picks
ELEGOO Saturn 3 Ultra 12K Resin Printer
Best for: Most resin projects
- Release Film Type
- ACF (what this guide is about)
- Build Volume
- 218.88 × 122.88 × 260 mm³
- Printing Technology
- MSLA
- Leveling Type
- 4-point leveling
- Features
- Wi-Fi
- Color
- Black
View on Amazon: ELEGOO Saturn 3 Ultra 12K Resin Printer Affiliate link
ELEGOO Saturn 3 Ultra: 10-inch 12K mono LCD (11520 x 5120, 19 x 24µm), 218.88 x 122.88 x 260mm build volume, ACF release liner fitted, Wi-Fi at 6-10 Mbps on 2.4G and 5G, Linux with 4G RAM and 4-point leveling.
Pros
- Tall 260mm Z on a 10-inch screen
- ACF liner included
- Wi-Fi file transfer
Cons
- 30 lb shipping weight
- Larger pixels than the 16K Halot-X1
Good fit if
- You print busts and kits on a Saturn 3 Ultra-size plate
- You send files over Wi-Fi
Skip if
- You only print small miniatures on the Saturn 3 Ultra
Verdict: The best all-round printer here that ships with ACF.
ANYCUBIC Photon Mono 4 Ultra 10K Resin Printer
Best for: Fast miniatures
- Build Volume
- 6.04''x3.42''x 6.49''
- Print Speed
- 120mm/h
- Printing Technology
- Resin
- Color
- Black
- Dimensions
- 15 × 10 × 20 inches
- Weight
- 8.82 pounds
View on Amazon: ANYCUBIC Photon Mono 4 Ultra 10K Resin Printer Affiliate link
ANYCUBIC Photon Mono 4 Ultra: 7-inch 10K screen (9024 x 5120, 17 x 17µm), ACF film with a release algorithm for up to 120mm/h, COB light with Fresnel lens at 90%+ uniformity, five smart checks and a 6.04 x 3.42 x 6.49 inch print size.
Pros
- Up to 120mm/h listed
- 17µm pixels
- Residual resin and failed print checks
Cons
- 7-inch build area
- No Wi-Fi listed
Good fit if
- You print miniatures quickly on the Mono 4 Ultra
- You want automatic failure detection
Skip if
- You need more than a 6.49 inch Z on the Mono 4 Ultra
Verdict: The quickest 7-inch printer in this set.
ELEGOO Mars 4 Ultra 9K Resin 3D Printer
Best for: Budget entry
- Release Film Type
- ACF (what this guide is about)
- Build Volume
- 6.04x3.06x6.5 Inches
- Printing Technology
- MSLA
- Leveling Type
- 4-point leveling system
- Features
- Wi-Fi
- Dimensions
- 23.8 × 10.6 × 11.2 inches
View on Amazon: ELEGOO Mars 4 Ultra 9K Resin 3D Printer Affiliate link
ELEGOO Mars 4 Ultra: 7-inch 9K mono LCD (8520 x 4320, 18µm), ACF release liner fitted, Wi-Fi on 2.4G and 5G, Linux with 4G RAM, 4-point leveling, laser-carved plate and a 4-inch touchscreen.
Pros
- Cheapest printer here
- Wi-Fi transfer
- ACF liner in the box
Cons
- Smallest build area
- No print speed figure listed
Good fit if
- You want a first resin printer with ACF and Wi-Fi
- You print figures under 6 inches tall on the Mars 4 Ultra
Skip if
- You want a 10-inch screen instead of the Mars 4 Ultra
Verdict: The budget way into ACF resin printing.
Creality Halot-X1 Combo 16K Resin Printer
Best for: 16K detail
- Printing Technology
- Resin
- Leveling
- Auto Leveling
- Features
- High Speed, Fully Assembled
- Color
- White
- Resolution
- 16K
- Dimensions
- 16.9 × 16.5 × 21.1 inches
View on Amazon: Creality Halot-X1 Combo 16K Resin Printer Affiliate link
Creality Halot-X1 Combo: 10.1-inch 16K screen (15120 x 6230, 14 x 19µm), up to 170mm/h, 211.68 x 118.37 x 200mm volume, a fixed plate that needs no leveling, resin heating to 30-45°C, RFID resin loading, 92 light zones and a high-temperature NACF release film.
Pros
- Finest pixels in the set
- Resin heating and RFID loading
- No plate leveling
Cons
- 200mm Z, lower than the Saturn 3 Ultra
- Film named NACF rather than ACF
Good fit if
- You want 16K detail with Creality's resin automation
- You work in a cold room where resin heating helps
Skip if
- You need the tallest Z height rather than the Halot-X1
Verdict: The detail and automation pick.
Phrozen Sonic Mega 8K S Resin 3D Printer
Best for: Batch production
- Build Volume
- 33 x 18.5 x 30 cm
- Printing Technology
- LCD/MSLA
- Color
- Green
- Resolution
- 8K
- Dimensions
- 18.6 × 15 × 22.3 inches
- Weight
- 57.3 pounds
View on Amazon: Phrozen Sonic Mega 8K S Resin 3D Printer Affiliate link
Phrozen Sonic Mega 8K S: 15-inch 8K mono LCD at 43µm, 33 x 18.5 x 30cm build space, ACF film paired with Phrozen's TR300 resin for its speed claim, lift-up lid and a built-in metal drip hanger; Phrozen quotes 80 1/32-scale miniatures in 90 minutes.
Pros
- Largest build space here
- Drip hanger saves resin
- Lift-up lid suits shelves
Cons
- 43µm pixels are the coarsest here
- 57.3 lb shipping weight
- Most expensive pick
Good fit if
- You run batches for a studio or shop
- You print large props or many models at once
Skip if
- You print a few miniatures at home, not Mega 8K S batches
Verdict: The production-scale ACF printer.
Specifications side by side
| Spec | ELEGOO Saturn 3 Ultra 12K Resin Printer | ANYCUBIC Photon Mono 4 Ultra 10K Resin Printer | ELEGOO Mars 4 Ultra 9K Resin 3D Printer | Creality Halot-X1 Combo 16K Resin Printer | Phrozen Sonic Mega 8K S Resin 3D Printer |
|---|---|---|---|---|---|
| Build Volume | 218.88 × 122.88 × 260 mm³ | 6.04''x3.42''x 6.49'' | 6.04x3.06x6.5 Inches | not stated | 33 x 18.5 x 30 cm |
| Print Speed | not stated | 120mm/h | not stated | not stated | not stated |
| Printing Technology | MSLA | Resin | MSLA | not stated | LCD/MSLA |
| Leveling Type | 4-point leveling | not stated | 4-point leveling system | not stated | not stated |
| Leveling | not stated | not stated | not stated | Auto Leveling | not stated |
| Features | Wi-Fi | not stated | Wi-Fi | High Speed, Fully Assembled | not stated |
| Color | Black | Black | Mars 4 Ultra | White | Green |
| Release Film Type | ACF | not stated | ACF | not stated | not stated |
| Resolution | 12K | not stated | not stated | 16K | 8K |
| Dimensions | 23 × 14 × 15 inches | 15 × 10 × 20 inches | 23.8 × 10.6 × 11.2 inches | 16.9 × 16.5 × 21.1 inches | 18.6 × 15 × 22.3 inches |
| Weight | 30 pounds | 8.82 pounds | 12.1 pounds | not stated | 57.3 pounds |
| Size | Saturn 3 Ultra 12K | Photon Mono 4 Ultra | Mars 4 Ultra | not stated | Sonic Mega 8K S |
| Model | SATURN 3 ULTRA | Mono 4 Ultra | Mars 4 Ultra | Halot-X1 Combo | MEGA8KS000US |
Is a printer with ACF film worth it?
ACF lowers peel force, so layers separate more gently and the printer can lift less and move faster; ANYCUBIC credits its film plus a release algorithm for the Mono 4 Ultra's 120mm/h, and Phrozen ties the Mega 8K S speed claim to ACF and its TR300 resin. The trade-off is cost: replacement ACF sheets are pricier than FEP and must match your vat size. Note that some newer printers, such as ELEGOO's Mars 5 Ultra and Saturn 4 Ultra, use tilting vats and say they need no ACF at all.
Worth it if
- You want faster resin printing with lower peel force
- You print large flat layers that tug on plain FEP
- You are fine buying size-matched ACF spares
Skip it if
- You only print a few small models a month
- You prefer a tilt-release printer that skips ACF
- You want the cheapest replacement film
How these ACF printers were picked
Each pick is a complete resin printer whose listing says it ships with ACF release film (Creality calls its version NACF). Loose ACF sheets, vats and wash stations are not printers and are left out, as are printers whose listings say they work without ACF. One listing per model is shown. Details come from the makers' listings and published specs; we compared them on paper and did not run the machines.
How to choose a resin printer with ACF film
-
Pick the screen size first
7-inch machines (Mars 4 Ultra, Mono 4 Ultra) suit miniatures; 10-inch (Saturn 3 Ultra, Halot-X1) handle busts and multi-part kits; 15-inch (Mega 8K S) is for batches.
-
Compare pixel size, not the K number
The Halot-X1 lists 14 x 19µm, the Mono 4 Ultra 17µm, the Mars 4 Ultra 18µm, the Saturn 3 Ultra 19 x 24µm and the Mega 8K S 43µm. Smaller pixels mean finer surface detail.
-
Look at Z height
The Saturn 3 Ultra lists 260mm and the Mega 8K S 30cm; the Halot-X1 lists 200mm, and the 7-inch pair about 6.5 inches.
-
Plan for ACF spares
Release film wears out. Buy sheets cut for your exact vat; ACF for a 7-inch Mars will not fit a 10-inch Saturn.
-
Count automation features
The Halot-X1 heats resin to 30-45°C and reads RFID resin tags; the Mono 4 Ultra runs five checks such as residual resin and failed print detection.
Frequently asked questions
What does ACF film do on a resin printer?
It replaces standard FEP under the vat and lowers the release force on each layer, which helps faster and more reliable peeling.
Which resin printer with ACF film is the cheapest here?
The ELEGOO Mars 4 Ultra, a 7-inch 9K printer with Wi-Fi.
Which ACF printer has the largest build volume?
The Phrozen Sonic Mega 8K S, with a 15-inch screen and a 33 x 18.5 x 30cm build space.
Is NACF the same as ACF?
Creality calls the Halot-X1 film NACF and describes it as a high-temperature release film with reduced release force; treat it as Creality's own ACF-type film.
Do all new resin printers use ACF?
No. ELEGOO's Mars 5 Ultra and Saturn 4 Ultra listings say they reach their speeds without ACF film.




