ELEGOO Water Washable Resin 2000g Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The point of this ELEGOO resin is cleanup: prints rinse in plain water instead of isopropyl alcohol, so there is no solvent smell and no IPA to buy or dispose of. The bottle holds 2000g in beige, a skin-like tone that suits figures and busts. The title calls it Water Washable 2.0 and names ELEGOO's Mars, Saturn and Jupiter printers alongside MSLA, DLP and LCD machines from other brands. Beyond that the listing says little: it promises smooth surfaces and sharp edges and lists prototypes, figures, jewelry and mechanical parts as uses, but gives no wavelength in the bullets, no strength data and none of the viscosity figures ELEGOO publishes on its other Water Washable 2.0 pages. This review is based on that listing alone.
What stands out
- Rinses in clean water, no IPA
- 2kg bottle in a skin-like beige
- Works on ELEGOO and other brands' printers
Who it fits
Good fit for
Home printers who want to avoid alcohol fumes and solvent disposal, especially in shared living space, and figure painters who like a skin-toned base.
Who should skip it
Anyone who needs tough parts: water-washable resins tend to be less tough than ABS-like ones, and this page gives no data. Also skip it if you need a stated wavelength or exposure guidance on the page itself.
Verdict: Convenient cleanup in a big bottle, sold on a thin listing; check ELEGOO's settings chart before you print.
What the listing states
2000g, beige
A large bottle in a skin-like color for figures.
Water rinse, no IPA
Clean prints in water; no alcohol smell during washing.
Smooth surfaces, sharp edges
ELEGOO's quality claim, without numbers.
ELEGOO and other printers
The title names Mars, Saturn and Jupiter plus MSLA, DLP and LCD machines.
What the page leaves out
There is no curing wavelength in the bullets (ELEGOO resins are normally 405nm), no shrinkage or hardness figure, and no mention of the 2.0 formula's lower viscosity that ELEGOO's other Water Washable 2.0 listings describe. The package measures 5.51 x 5.51 x 11.4 inches and weighs 4.41 lb, consistent with 2kg.
Washing and curing
Rinse prints in clean water, dry them fully and then post-cure; trapped water can cloud surfaces. Rinse water carries uncured resin, so cure it in sunlight or under UV and filter it before disposal; it should not go straight down the drain.
Before buying
Checks.
Check before you buy
- You want water cleanup more than toughness
- Your printer runs ELEGOO-style 405nm resin
- You have space to cure rinse water
- You will use 2kg before it ages
The product at a glance
ELEGOO Water Washable Resin 2000g
Best for: IPA-free printing
- Resin Type
- Water Washable
- Compatible Technology
- MSLA, DLP, LCD
- Net Weight
- 2000g
- Cleaning Method
- Clean water
- Application
- Prototypes, figures, jewelry, parts
- Printing Technology
- Resin
View on Amazon: ELEGOO Water Washable Resin 2000g Affiliate link
ELEGOO Water Washable Resin 2.0, beige, 2000g: rinses in clean water instead of IPA, for ELEGOO Mars/Saturn/Jupiter and other MSLA, DLP and LCD printers. The listing gives no wavelength or performance figures.
Pros
- No alcohol needed
- Skin-toned 2kg bottle
- Broad printer compatibility
Cons
- Very sparse listing
- No strength data
- Rinse water still needs curing
Good fit if
- You print at home and want no IPA
- You print figures in skin tones
Skip if
- You print load-bearing parts
- You want full specs on the page
Verdict: Easy cleanup, light on details.
Specifications side by side
| Spec | ELEGOO Water Washable Resin 2000g |
|---|---|
| Resin Type | Water Washable |
| Compatible Technology | MSLA, DLP, LCD |
| Net Weight | 2000g |
| Cleaning Method | Clean water |
| Application | Prototypes, figures, jewelry, parts |
| Printing Technology | Resin |
| Features | Fast Curing |
| Dimensions | 5.51 × 5.51 × 11.4 inches |
| Weight | 4.41 pounds |
| Size | L-2000g |
| Color | Beige |
Water softener resin is a different material entirely, and our aquatrol water softener resin softener review covers that product on its own terms.
Frequently asked questions
Does ELEGOO Water Washable beige resin need IPA?
No. ELEGOO says it only needs rinsing with clean water.
Is ELEGOO Water Washable 2.0 strong enough for mechanical parts?
ELEGOO lists mechanical parts as a use but gives no strength data; for load-bearing parts an ABS-like resin is the safer choice.
What wavelength does this ELEGOO water-washable bottle use?
The bullets do not say; ELEGOO's resins for Mars, Saturn and Jupiter printers are 405nm, so expect the same.
Can I pour ELEGOO water-wash rinse water down the sink?
Not directly. The rinse water contains uncured resin; cure it with UV or sunlight and filter it first.
