As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

ELEGOO Water Washable Resin 2.0 (Grey, 1kg) Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

ELEGOO Water Washable Resin 2.0 in grey suits miniature and model painters who want to skip isopropyl alcohol, and grey is the right shade for that work: it reads like primer, so you can spot layer lines, supports marks and soft detail before you paint. The 2.0 formula cleans with water instead of IPA, and ELEGOO puts numbers on the upgrade: 109.40 mPa.s at 25°C, which it says is 76% lower than its 1.0 resin and 50-60% below other resins on the market. Low shrinkage and fast curing round out the claims. It runs on most 405nm LCD printers, from tabletop models to parts that need some strength. The listing gives no exposure times or hardness. These notes come from ELEGOO's listing; we have not rinsed a print from this bottle.

What stands out

  • Rinses in water, no IPA
  • 109.40 mPa.s at 25°C
  • Grey shows detail before painting
  • Fast curing, low shrinkage

Who it fits

Good fit for

Miniature and model painters who want water cleanup and a primer-like grey to check prints before painting.

Who should skip it

Anyone printing parts that must be tough or drillable; an ABS-like resin fits that better.

Verdict: A clean, convenient grey for painted minis; not a tough-part resin.

ELEGOO Water Washable 2.0 grey, key facts

Water washable

Rinse prints in water instead of IPA.

109.40 mPa.s at 25°C

Thin; 76% below ELEGOO's 1.0 water washable.

Low shrinkage

Sharp, accurate details.

405nm LCD printers

Fits most hobby resin printers.

Grey, 1kg

Primer-like shade for checking detail.

Water cleanup, with care

Water washing removes the IPA smell and cost, but the rinse water still holds uncured resin. Let it sit in sunlight or under UV until the resin solidifies, then filter it out before disposal, and never pour it straight down the drain. Dry parts fully before post-curing; water washable prints can whiten if cured while damp.

Printing grey minis with WW 2.0

Start from an ELEGOO water washable profile and run an exposure test. Grey lets you check fine features like faces and edges under light before priming. Low viscosity helps small, dense supports drain cleanly.

Before buying ELEGOO Water Washable 2.0 grey

Checks.

Check before you buy

  • You paint ELEGOO water washable prints and want IPA-free cleanup
  • You can cure ELEGOO rinse water before disposal
  • Your WW 2.0 parts are models, not load-bearing parts

The product at a glance

ELEGOO Water Washable Resin 2.0 Grey 1kg

Best for: Painted minis without IPA

Resin Type
Water Washable
Curing Wavelength
405nm
Compatible Technology
LCD
Net Weight
1000g
Cleaning Method
Water
Application
Tabletop models, industrial parts

View on Amazon: ELEGOO Water Washable Resin 2.0 Grey 1kg Affiliate link

ELEGOO Water Washable Resin 2.0, grey 1kg: rinse-in-water resin with 109.40 mPa.s viscosity, low shrinkage and fast curing, in a primer-like grey for painters.

Pros

  • IPA-free cleanup
  • Very low viscosity
  • Grey shows detail

Cons

  • Not for tough parts
  • No exposure times
  • Rinse water needs curing

Good fit if

  • You paint minis and dislike IPA

Skip if

  • You need drillable functional parts

Verdict: An easy, clean grey for painters.

Specifications side by side

Spec ELEGOO Water Washable Resin 2.0 Grey 1kg
Resin Type Water Washable
Curing Wavelength 405nm
Compatible Technology LCD
Net Weight 1000g
Cleaning Method Water
Application Tabletop models, industrial parts
Printing Technology Resin
Features Low Shrinkage
Size 1 Count (Pack of 1)
Color Grey 1KG

Frequently asked questions

Do grey WW 2.0 prints need an IPA bath?

No, ELEGOO says it cleans with water.

How runny is ELEGOO Water Washable Resin 2.0?

ELEGOO lists 109.40 mPa.s at 25°C, 76% below its 1.0 formula.

Why choose grey water washable resin?

Grey shows detail and flaws clearly, like primer, before painting.

Can I pour ELEGOO resin rinse water down the drain?

No; cure the resin in the water first and filter it out before disposal.

See also