ANYCUBIC Glow in the Dark PLA (Glow Blue) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ANYCUBIC Glow in the Dark PLA is a 1kg spool of 1.75mm PLA with phosphorescent material that glows after charging; this listing is the version that glows blue. ANYCUBIC's headline claim is a 300% brighter glow that lasts 150% longer than similar filaments under the same light, which we cannot check, so read it as a relative claim with no baseline named. To get the strongest glow, ANYCUBIC asks you to charge prints in full sunlight or UV light. The rest of the page covers basics: ±0.02mm tolerance, low shrinkage, 24-hour drying before vacuum sealing in a resealable nylon bag, a wide spool hub, and a glossy finish. It is sold for Halloween props, but blue glow also suits night lights, star maps and kids' room decor. What is missing: nozzle and bed temperatures, print speed and how long the glow lasts in minutes. This review draws on ANYCUBIC's listing only.
What stands out
- Glow PLA, glows blue, 1kg, 1.75mm
- 300% brighter, 150% longer glow (ANYCUBIC claim)
- Charge in sunlight or UV
- ±0.02mm, dried 24 h, vacuum sealed
- No temperatures or speed listed
Who it fits
Good fit for
Makers printing Halloween props, night lights, star charts and kids' room decor who want a blue glow from a well-known brand.
Who should skip it
Anyone who needs printed settings or a glow time in minutes, and buyers who want a different glow color from this listing.
Verdict: A bright blue-glow PLA with strong claims and thin settings; test a small print first.
ANYCUBIC glow PLA: what the listing says
Glows blue
Charges under light and glows blue in the dark.
300% / 150% claims
Brighter and longer than unnamed rivals, per ANYCUBIC.
Sunlight or UV charge
Stronger light gives a stronger glow.
±0.02mm
Tight diameter for steady extrusion.
No print settings
Tune ANYCUBIC glow PLA from your usual PLA values.
How ANYCUBIC's blue glow works
Glow filament mixes phosphorescent powder into PLA. It stores light energy and releases it slowly, so the glow is brightest just after charging and fades over time. ANYCUBIC does not say how long the glow lasts in minutes, only that it lasts 150% longer than other filaments. Thicker walls and more solid surfaces hold more glow material, so solid ornaments glow more than thin shells.
Printing ANYCUBIC glow PLA
With no temperatures on the page, start from your slicer's standard PLA profile. ANYCUBIC suggests preheating the nozzle before loading or changing filament, cutting the tip at an angle, and pushing it through until it melts out. Charge finished prints under sunlight or a UV torch before showing them off in the dark.
Before buying ANYCUBIC glow blue PLA
Checks.
Check before you buy
- A blue glow suits your ANYCUBIC glow prints
- You can tune ANYCUBIC glow PLA without listed settings
- You have sunlight or UV to charge ANYCUBIC glow parts
- You do not need a glow time in minutes from ANYCUBIC
The product at a glance
ANYCUBIC Glow in the Dark PLA (1.75mm)
Best for: Glow decor
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Dimensional Accuracy
- +/- 0.02mm
- Surface Finish
- Glow in the dark
- Printing Technology
- FDM
View on Amazon: ANYCUBIC Glow in the Dark PLA (1.75mm) Affiliate link
ANYCUBIC Glow in the Dark PLA, glow blue 1kg: 300% brighter and 150% longer glow claimed, ±0.02mm, dried and vacuum sealed; no print settings.
Pros
- Bright glow claimed
- ±0.02mm
- Resealable dry packaging
Cons
- No print temperatures
- No glow time given
- Claims have no named baseline
Good fit if
- You want blue-glowing ANYCUBIC night lights
Skip if
- You need full print settings
Verdict: A blue-glow PLA for decor.
Specifications side by side
| Spec | ANYCUBIC Glow in the Dark PLA (1.75mm) |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1KG |
| Dimensional Accuracy | +/- 0.02mm |
| Surface Finish | Glow in the dark |
| Printing Technology | FDM |
| Compatible Material | PLA |
| Features | Glow in the Dark |
| Size | 1.75Mm |
| Dimensions | 8.23 × 8.23 × 1.77 inches |
| Weight | 2.2 pounds |
| Color | 1kg Pla Glow in the Dark - Glow to Blue |
Frequently asked questions
What color does this ANYCUBIC glow PLA glow?
Blue, according to the listing's color field.
How bright is ANYCUBIC glow in the dark PLA?
ANYCUBIC claims 300% more brightness and 150% longer glow than similar filaments, without naming them.
How do I charge ANYCUBIC glow prints?
Leave them in full sunlight or under UV light for a while, ANYCUBIC says.
What temperature should I print ANYCUBIC glow PLA at?
ANYCUBIC prints no nozzle or bed range for the glow spool; begin with your normal PLA values.
What tolerance does ANYCUBIC glow PLA have?
±0.02mm.
