ELEGOO Standard Resin 2.0 Black 1000g Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO Standard Resin 2.0 (US-EHJ-3DL-SR2 in black) is the brand's revised everyday resin, and the headline change is toughness: ELEGOO says cured parts are harder and tougher than before, resist impact and are not easy to break. That is the usual weak spot of standard resin, where thin swords, spears and supports snap during cleanup. It keeps the low-odor, low-shrinkage pitch of the first version, cures fast under 405nm light and, ELEGOO says, its pigments do not separate in the bottle over time. The 1000g size is a sensible first bottle for a beginner. What the listing leaves out is any number: no exposure time, shrinkage percentage, viscosity or hardness rating, so toughness is a claim you cannot compare on paper. Check your slicer profile or ELEGOO's settings chart and run a test print. Our notes on this resin come from ELEGOO's own listing text.
What stands out
- Tougher, harder cured parts per ELEGOO
- Low odor
- Fast curing at 405nm
- Pigment stays mixed, per ELEGOO
Who it fits
Good fit for
Beginners and hobbyists printing miniatures or small display parts who have had thin details snap with older standard resins.
Who should skip it
Anyone who needs published mechanical data, or flexible and heat-resistant engineering parts.
Verdict: A tougher take on cheap standard resin; the claims come without numbers.
ELEGOO Standard 2.0 black, spec by spec
Higher toughness and hardness
Fewer snapped thin parts, per ELEGOO; no rating given.
Low odor
Milder smell than older standard resins.
405nm, LCD/DLP/MSLA
Fits nearly all consumer resin printers.
Fast curing
Shorter exposure; settings not listed.
1000g, black
Grey and white 2.0 also sold; grey in 2000g too.
Standard 2.0 vs ELEGOO's other everyday resins
ELEGOO sells three close relatives. The original Standard resin is the plain baseline. 8K Standard targets finer detail on high-resolution printers. Standard 2.0 is the toughened one. Choose 2.0 if parts break during support removal; choose 8K Standard if you run an 8K or higher printer and surface detail matters most; choose the plant-based resin if smell is your main concern.
Printing with Standard 2.0
Shake the bottle well before each session even though ELEGOO says the pigment stays stable. Black resin needs slightly different exposure from grey on many printers, so use the color-specific setting if your slicer offers one. Wash and post-cure as normal; tougher resin still needs a full cure to reach its strength.
Before ordering ELEGOO Standard 2.0 black
A short list for this ELEGOO 2.0 resin.
Check before you buy
- Your printer uses a 405nm light source for ELEGOO 2.0
- You want black rather than ELEGOO 2.0 grey or white
- You will run an exposure test with ELEGOO 2.0
The product at a glance
ELEGOO Standard Resin 2.0, 1000g
Best for: Beginner miniatures
- Resin Type
- Standard
- Curing Wavelength
- 405nm
- Compatible Technology
- LCD, DLP, MSLA
- Net Weight
- 1000g
- Printing Technology
- Resin
- Features
- High Precision, Low Odor
View on Amazon: ELEGOO Standard Resin 2.0, 1000g Affiliate link
ELEGOO Standard Resin 2.0 in black, 1000g: tougher and harder than the first version per ELEGOO, low odor, 405nm.
Pros
- Tougher than basic standard resin
- Low odor
- Beginner friendly
Cons
- No mechanical figures
- No exposure settings listed
Good fit if
- Thin parts keep snapping
- You are new to resin
Skip if
- You need engineering-grade resin
Verdict: A good everyday black resin with extra toughness.
Specifications side by side
| Spec | ELEGOO Standard Resin 2.0, 1000g |
|---|---|
| Resin Type | Standard |
| Curing Wavelength | 405nm |
| Compatible Technology | LCD, DLP, MSLA |
| Net Weight | 1000g |
| Printing Technology | Resin |
| Features | High Precision, Low Odor |
| Size | 1KG |
| Color | Black 2.0 |
| Model | US-EHJ-3DL-SR2 |
Frequently asked questions
Is ELEGOO Standard Resin 2.0 stronger than the first version?
ELEGOO says it is tougher and harder after curing, with better impact resistance; no figures are given.
What printers work with ELEGOO Standard 2.0?
Most LCD, DLP and MSLA printers with a 405nm light source.
Does ELEGOO Standard 2.0 smell?
ELEGOO describes the odor as very light and not irritating.
Does ELEGOO give exposure settings for Standard 2.0 black on the listing?
No. Use ELEGOO's settings chart or a calibration print.
See also
- elegoo abs like ultra resin neon peach 1000g review
- siraya tech blu lava PC like resin black 1kg review
- jamg he temporary dental resin a3 500g review
- elegoo standard maroon resin review
- elegoo abs like 3 0 grey 2kg bottle review
- ELEGOO Water Washable Resin 2000g Review (2026): A Spec-Based Look
- ELEGOO Plant-Based Standard Resin Black 2000g Review (2026)
- ELEGOO ABS-Like 3.0 Pro Resin (Black, 2000g) Review (2026)
- best ELEGOO 3d printers
- easycargo 30pcs 3d printer heatsink review
