Comgrow Brown PETG Filament (1.75mm, 1kg) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Comgrow's brown PETG is a 1kg, 1.75mm spool with a ±0.02mm tolerance, and its color is the reason to choose it over the white or black spools from the same line. Brown hides on wooden furniture, plant pots, fences and shelving, so cable clips, furniture feet, hinge blocks and garden stakes printed in it do not stand out. Being PETG, it handles knocks and weather better than PLA, and Comgrow pitches it for both indoor and outdoor parts. It is also one of the few budget spools that prints its settings on the listing: 235-240°C at the nozzle, a 70°C bed and 30mm/s. That speed is slow for modern printers, so treat it as a safe starting point. The spool ships dried and vacuum sealed. One listing conflict: the title says 1kg while the weight field says 1 pound. This review draws on Comgrow's listing and spec fields only.
What stands out
- PETG, 1kg, brown
- 1.75mm ±0.02mm
- 235-240°C nozzle, 70°C bed
- 30mm/s suggested
- Weight field says 1 pound
Who it fits
Good fit for
Anyone printing furniture fittings, garden parts or shelf brackets that should match wood or soil tones.
Who should skip it
Makers who need fast print speeds out of the box, or crisp detail for display models where PLA prints cleaner.
Verdict: A cheap, tough brown PETG with settings on the listing, best for practical parts that should blend in.
Comgrow brown PETG settings and specs
235-240°C / 70°C bed
Comgrow's own starting point.
30mm/s
Conservative; most printers can go faster after tuning.
±0.02mm diameter
Steady feeding through the extruder.
Brown color
Blends with wood, soil and bark.
Dried and vacuum sealed
Ready to print from a fresh bag.
What brown PETG is good at
PETG takes impact and flexes a little before it breaks, which suits clamps, holders and printer parts, the uses Comgrow lists. In brown it moves into the home and garden: drawer stops under oak, plant labels, hose guides and trellis clips. PETG also shrugs off rain better than PLA, so these parts can sit outdoors.
Getting started with Comgrow brown PETG
Start at Comgrow's 235-240°C and 70°C bed, then raise speed in steps once the first layers look good. PETG bonds strongly to smooth PEI, so use glue stick or a textured sheet as a release layer. Expect some stringing on travel moves; a little retraction tuning and a dry spool keep it under control.
Before buying Comgrow brown PETG
Checks.
Check before you buy
- Your Comgrow brown PETG parts are practical, not display pieces
- Your hotend reaches 240°C
- You can use glue or a textured plate under PETG
- You accept slow 30mm/s settings as a start
The product at a glance
Comgrow Brown PETG 1.75mm 1kg
Best for: Wood-tone functional parts
- Material Type
- PETG
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- +/- 0.02mm
- Printing Technology
- FDM
- Weight
- 1 pounds
View on Amazon: Comgrow Brown PETG 1.75mm 1kg Affiliate link
Comgrow brown PETG 1kg: 1.75mm ±0.02mm, 235-240°C, 70°C bed, 30mm/s, tough and weather resistant; weight field says 1 pound.
Pros
- Settings printed on the listing
- Tough for clips and brackets
- Brown blends with wood and soil
Cons
- 30mm/s is slow
- Sticks hard to smooth PEI
- Weight field conflicts with title
Good fit if
- You print furniture or garden parts in brown PETG
Skip if
- You want fast-print PETG with no tuning
Verdict: A low-cost brown PETG for parts that should blend in.
Specifications side by side
| Spec | Comgrow Brown PETG 1.75mm 1kg |
|---|---|
| Material Type | PETG |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | +/- 0.02mm |
| Printing Technology | FDM |
| Compatible Material | PETG |
| Size | 1KG |
| Weight | 1 pounds |
| Color | Brown |
| Model | ZSPETGBR1 |
Frequently asked questions
What settings does Comgrow give for its brown PETG?
235-240°C at the nozzle, 70°C on the bed and 30mm/s.
Is Comgrow brown PETG good for outdoor parts?
Comgrow says it suits outdoor use where weather resistance matters.
How heavy is the Comgrow brown PETG spool?
The title says 1kg; the weight field shows 1 pound, which looks like a listing error.
What tolerance does the brown Comgrow PETG have?
±0.02mm on 1.75mm filament.
Why choose brown PETG?
It blends into wooden furniture and garden settings, so functional parts stay unobtrusive.
