Best RESIONE 3D Printer Resins: 4 Formulas Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
RESIONE, listed under the brand name RI Resione, sells a short range of specialist resins rather than a basic standard resin, so picking one is about the job. Our top pick is Tough74: a rigid but tough resin for tabletop miniatures and articulated figures, with a smooth, non-reflective surface, low shrinkage and joints that RESIONE says stay tight without powdering. Tough74 V2 pushes further toward functional parts that can be drilled and tapped. D01S is a matte, plaster-like dental model resin with very low shrinkage, and F80 is a flexible resin with a Shore hardness of 50-60A for seals, tires and gum models. Each formula is shown once, in one color; other colors and bottle sizes of the same resin exist. We used RESIONE's listings and published specs, not our own prints.
Our top pick: RESIONE Tough Series Resin Black.
Quick picks
| # | Product | Best for | Price |
|---|---|---|---|
| 1 | RESIONE Tough Series Resin Black Best overall | Miniatures, action figures | Check price of RESIONE Tough Series Resin Black on Amazon |
| 2 | RESIONE Tough74 V2 ABS-Like Resin 1KG Best for functional parts | Functional prototypes | Check price of RESIONE Tough74 V2 ABS-Like Resin 1KG on Amazon |
| 3 | RI Resione D01S Dental Model Resin Best for dental models | Dental labs | Check price of RI Resione D01S Dental Model Resin on Amazon |
| 4 | RI Resione F80 Flexible Resin 1kg Best flexible resin | Seals, tires, gum models | Check price of RI Resione F80 Flexible Resin 1kg on Amazon |
Our 4 picks
RESIONE Tough Series Resin Black
Best for: Miniatures, action figures
- Resin Type
- Tough
- Application
- Articulated figures, miniatures
- Printing Technology
- Resin
- Features
- Low Shrinkage
- Color
- Black
- Surface Finish
- Smooth
View on Amazon: RESIONE Tough Series Resin Black Affiliate link
RESIONE Tough74 (black): rigid and tough resin with low shrinkage, smooth non-reflective surface and wear-resistant joints; for tabletop miniatures and articulated figures; 0.05mm layers and 0.05mm joint gaps advised.
Pros
- Drop-resistant miniatures
- Joints that stay tight
- Smooth non-sticky finish
Cons
- Fine 0.02mm layers discouraged
- No exposure settings
Good fit if
- You print RESIONE Tough74 tabletop minis that get handled
Skip if
- You need drillable RESIONE parts
Verdict: Tough, detailed resin for minis and figures.
RESIONE Tough74 V2 ABS-Like Resin 1KG
Best for: Functional prototypes
- Resin Type
- ABS-like
- Net Weight
- 1KG
- Application
- Action figures, prototypes, enclosures
- Printing Technology
- Resin
- Features
- High Precision
- Surface Finish
- Smooth
View on Amazon: RESIONE Tough74 V2 ABS-Like Resin 1KG Affiliate link
RESIONE Tough74 V2 (grey, 1kg): ABS-like, more rigid and tougher than Tough74, drillable and tappable, scratch-resistant, stable at 0.03mm layers, low settling in the vat.
Pros
- Takes drilling and tapping
- Scratch-resistant surface
- Less stirring needed
Cons
- Not for thin walls or slender columns
- No exposure settings
Good fit if
- You print RESIONE V2 enclosures or prototypes that get drilled
Skip if
- Your RESIONE prints have thin swords or spears
Verdict: The machinable step up from Tough74.
RI Resione D01S Dental Model Resin
Best for: Dental labs
- Compatible Technology
- LCD, DLP, MSLA
- Net Weight
- 1KG
- Application
- Dental models
- Printing Technology
- Resin
- Features
- Low Shrinkage
- Finish
- Matte
View on Amazon: RI Resione D01S Dental Model Resin Affiliate link
RESIONE D01S dental model resin (seashell, 1kg): very low shrinkage, high accuracy, hard wear-resistant matte surface with plaster texture, clear margin lines and scan-friendly finish.
Pros
- Holds size for weeks
- Plaster-like matte finish
- Scan-friendly surface
Cons
- Model resin only
- Pricier than Tough74
Good fit if
- Your lab prints RESIONE D01S implant or study models
Skip if
- You need an in-mouth resin from RESIONE
Verdict: A plaster-look dental model resin.
RI Resione F80 Flexible Resin 1kg
Best for: Seals, tires, gum models
- Printing Technology
- Resin
- Color
- Black
- Size
- 1KG
- Curing Wavelength
- 405nm
- Weight
- 2.2 pounds
View on Amazon: RI Resione F80 Flexible Resin 1kg Affiliate link
RESIONE F80 flexible resin (black, 1kg): Shore 50-60A, high elongation, quick shape recovery, stays soft below 10°C; for seals, buffers, toy tires and elastic prototypes (pink 500g version for gum models).
Pros
- Rubber-like 50-60A
- Recovers after bending
- Works on RGB and mono LCDs
Cons
- Elasticity drops in the cold
- No tear strength figure
Good fit if
- You print RESIONE F80 seals or toy tires
Skip if
- You need rigid RESIONE parts
Verdict: A soft resin for rubber-like parts.
Specifications side by side
| Spec | RESIONE Tough Series Resin Black | RESIONE Tough74 V2 ABS-Like Resin 1KG | RI Resione D01S Dental Model Resin | RI Resione F80 Flexible Resin 1kg |
|---|---|---|---|---|
| Resin Type | Tough | ABS-like | not stated | not stated |
| Compatible Technology | not stated | not stated | LCD, DLP, MSLA | not stated |
| Net Weight | not stated | 1KG | 1KG | not stated |
| Application | Articulated figures, miniatures | Action figures, prototypes, enclosures | Dental models | not stated |
| Printing Technology | Resin | Resin | Resin | Resin |
| Compatible Material | not stated | ABS | not stated | not stated |
| Features | Low Shrinkage | High Precision | Low Shrinkage | not stated |
| Color | Black | Tough74 V2 | seashell-colored | Black |
| Size | not stated | 1KG | D01S | 1KG |
| Finish | not stated | not stated | Matte | not stated |
| Surface Finish | Smooth | Smooth | not stated | not stated |
| Curing Wavelength | not stated | not stated | not stated | 405nm |
| Dimensions | 9 × 3 × 3 inches | not stated | not stated | not stated |
| Weight | 2.6 pounds | 2.6 pounds | not stated | 2.2 pounds |
| Model | Tough74 | Tough74 V2 | D01S | F80-CA-P |
RESIONE resins side by side
Tough74 balances rigidity and toughness so supports and thin parts hold their shape during printing; RESIONE suggests a 0.05mm layer height for miniatures rather than 0.02-0.03mm, and a 0.05mm gap at joints. Tough74 V2 is described as more rigid and tougher than Tough74, closer to a tough thermoplastic, stable at 0.03mm layers, and resistant to settling in the vat, though RESIONE says to avoid thin walls and slender columns with it. D01S keeps dental models at size for weeks and gives a hard, wear-resistant matte surface that scans cleanly. F80 cures soft (50-60A), springs back after deformation and stays soft below 10°C, with less elasticity in the cold. All four are sold for mainstream LCD, MSLA and DLP printers; none of the listings gives exposure times.
Who RESIONE resins suit
Choose Tough74 if you print tabletop miniatures or posable figures that get dropped and handled. Choose Tough74 V2 if your parts will be drilled, tapped or rubbed, such as enclosures, prototypes or figure joints without thin sections. Choose D01S if you print dental study, implant or restoration models that must hold size and show margins clearly. Choose F80 if you need soft, rubbery parts: black for seals, buffers and toy tires, or the pink version for gum models.
Choosing a RESIONE resin
-
Use 0.05mm layers for RESIONE Tough74 minis
RESIONE warns that 0.02-0.03mm layers make Tough74 miniatures much harder to print.
-
Leave joint clearance with RESIONE Tough74
A preset gap of about 0.05mm at joints is RESIONE's advice for articulated figures.
-
Avoid thin walls in RESIONE Tough74 V2
RESIONE lists V2 for parts without thin-wall or slender-column structures.
-
Run exposure tests for every RESIONE formula
None of the four listings gives exposure settings, so calibrate on your printer.
Frequently asked questions
What is the best RESIONE resin?
Tough74 for most hobby printing, because it is tough enough for dropped miniatures and figure joints while keeping fine detail.
What is the difference between RESIONE Tough74 and Tough74 V2?
RESIONE says V2 is more rigid and tougher, can be drilled and tapped, and prints stably at 0.03mm, but it should not be used for thin walls or slender columns.
How soft is RESIONE F80?
Shore 50-60A, with good recovery after bending; it stays soft below 10°C but loses some elasticity.
Is RESIONE D01S for dental appliances?
It is a model resin for study, implant and restoration models; the listing claims no biocompatibility for use in the mouth.
Is RI Resione the same as RESIONE?
Yes. The brand record reads RI Resione while the bottles and titles say RESIONE.



