ELEGOO Standard Maroon Resin 1000g Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO's Standard resin is the basic photopolymer most new resin printers start with, and this 1000g bottle comes in maroon, a deep red that makes unpainted prints look finished. ELEGOO describes it as a low-shrinkage, low-viscosity formula that reflows quickly under the build plate, smells less than older resins and keeps its shape after washing and curing. It cures at 405nm on ELEGOO Mars, Saturn and Jupiter printers and other MSLA, DLP and LCD machines. What it lacks is toughness data: there are no hardness, elongation or heat figures, and standard resin is the brittle end of ELEGOO's range. The stock level was low at our check. We built this review from ELEGOO's listing, not from our own prints.
What stands out
- Maroon color looks finished without paint
- Low viscosity for quick reflow
- Low odor for a standard resin
Who it fits
Good fit for
Hobbyists printing display figures, busts, dice and decorative pieces they want to show off in color, and new resin users who want a cheap bottle to learn exposure settings on.
Who should skip it
Anyone printing snap-fits, thin swords and spears, or parts that get handled: ELEGOO's ABS-Like 3.0 costs a little more and resists breaking. Also not ideal if you plan to prime and paint everything, since a grey bottle shows detail better.
Verdict: A cheap, colorful standard resin for display prints; buy ABS-Like instead for anything that must survive handling.
What the listing states
1000g bottle
One standard 1kg refill, the usual size for a home resin printer.
Low shrinkage
Prints stay close to the model's size and resist warping and cracking after post-curing.
Low viscosity, good fluidity
Resin flows back under the plate faster, which helps success rates and shortens prints.
405nm, MSLA/DLP/LCD
Works on nearly every current consumer resin printer, not only ELEGOO's.
Color and formula
ELEGOO says its standard resin uses high-quality pigments and photoinitiators for a pure, bright color, and maroon is one of its deeper shades. The spec block lists the model as 'Vermelho 1KG' (Portuguese for red) and a 2-pound weight, slightly under the 2.2 lb a full kilo would weigh; treat both as data-entry quirks.
Printing and cleanup
Shake the bottle, pour into the vat and start from ELEGOO's settings for your printer. Wash prints in isopropyl alcohol (this is not a water-washable formula), then cure them. Dark red resin absorbs light, so you may need slightly different exposure than a grey bottle; run a test print first.
Before buying
Checks.
Check before you buy
- Your printer uses a 405nm light source
- You own gloves, IPA and a curing light
- Your prints are for display, not load
- You are fine with a red base color
The product at a glance
ELEGOO Standard Maroon Resin 1000g
Best for: Display prints
- Resin Type
- Standard
- Curing Wavelength
- 405nm
- Compatible Technology
- MSLA, DLP, LCD
- Net Weight
- 1000g
- Printing Technology
- Resin
- Dimensions
- 5.91 × 3.15 × 7.87 inches
View on Amazon: ELEGOO Standard Maroon Resin 1000g Affiliate link
ELEGOO Standard resin, maroon, 1000g: low-shrinkage, low-viscosity, low-odor standard photopolymer for 405nm MSLA, DLP and LCD printers, in a deep red that looks finished without paint. Low stock.
Pros
- Rich color straight off the plate
- Fast reflow
- Cheap 1kg bottle
Cons
- No strength data
- Brittle compared with ABS-Like
- Low stock
Good fit if
- You print colored display pieces
- You are learning resin settings
Skip if
- Your prints need to flex or survive drops
Verdict: Good value for display prints in red.
Specifications side by side
| Spec | ELEGOO Standard Maroon Resin 1000g |
|---|---|
| Resin Type | Standard |
| Curing Wavelength | 405nm |
| Compatible Technology | MSLA, DLP, LCD |
| Net Weight | 1000g |
| Printing Technology | Resin |
| Dimensions | 5.91 × 3.15 × 7.87 inches |
| Weight | 2 pounds |
| Size | M-1000g |
| Color | Maroon |
| Model | Vermelho 1KG |
If your projects extend beyond resin printing into music gear, our fender standard stratocaster review breaks down that guitar using the same spec-first approach.
Frequently asked questions
Is ELEGOO Standard Maroon resin brittle?
It is a standard resin, the most brittle ELEGOO type; the listing gives no toughness figures, so use ABS-Like for parts that bend or take knocks.
Can the maroon ELEGOO resin be washed in water?
No. It is the standard formula, so wash it in isopropyl alcohol; ELEGOO sells separate water-washable resins.
Which printers can use ELEGOO Standard Maroon?
Any 405nm MSLA, DLP or LCD printer; ELEGOO names its Mars, Saturn and Jupiter lines.
Why is the ELEGOO maroon resin model listed as Vermelho?
Vermelho is Portuguese for red; the spec field seems copied from another market's listing.
