Best QIDI 3D Printer Accessories: 3 Picks Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
QIDI's accessory range is small and printer-specific, so the right pick depends on which QIDI you own. Our top pick is the QIDI Box for the Plus5: it adds multi-color and multi-material printing (up to 16 colors with several boxes chained), dries filament at 65°C while printing, reads QIDI spools by NFC and uses a hardened dual-gear drive for carbon and glass fiber filaments. The QIDI Polar Cooler is for Max4 and Q2 owners who print nylon, PC and fiber-filled materials hot and fast and want fewer clogs. The QIDI chamber camera, the cheapest item, adds remote viewing and time-lapse to the older Q1 Pro, X-Max3, X-Plus3 and X-Smart3. We compared QIDI's listings and published specs; none of these were tested hands-on.
Quick picks
Our 3 picks
QIDI Box Multi-Color 3D Printing System for QIDI Plus5 3D Printer | active drying, nfc intelligent recognition and filament auto-reload, double hardened steel gear for pla/petg/abs/cf/gf/pa/pc
Best for: Multi-color on a Plus5
- Color Printing
- Multi-Color
- Compatible Material
- PLA, PETG, ABS
- Nozzle Material
- Hardened Steel
QIDI Box for Plus5: multi-color and multi-material unit, up to 16 colors when cascaded, 65°C active drying with humidity display, NFC spool recognition, hardened dual-gear drive for CF/GF, run-out and tangle detection.
Pros
- Adds multi-color to the Plus5
- Dries filament while printing
- Handles CF and GF filaments
Cons
- Plus5 listing only; other printers need their own version
- The priciest item here
Good fit if
- You own a QIDI Plus5 and want multi-color prints
Skip if
- Your QIDI is a Q1 Pro or X-3 series
Verdict: The add-on that changes what a Plus5 can print.
QIDI Polar Cooler for Max4/Q2
Best for: High-temp printing
View on Amazon: QIDI Polar Cooler for Max4/Q2 Affiliate link
QIDI Polar Cooler: active toolhead cooling with ceramic heatbreak and its own air duct, claimed up to 90% fewer clogs, rated for 370°C nozzles, 40mm³/s flow and 800mm/s on Max4 and Q2.
Pros
- Targets heat creep clogs
- Made for ABS, ASA, PC, nylon and CF
- No modification needed, per QIDI
Cons
- Fit list differs between title and bullets
- Only for newer QIDI printers
Good fit if
- You print nylon or CF on a QIDI Max4 or Q2
Skip if
- You print only PLA at moderate speed
Verdict: A clog fix for hot, fast engineering prints.
QIDI 3D Printer Camera for QIDI Q1 Pro, X-Max3, X-Plus3, X-Smart3 | hd video, remote monitoring, plug and play, time-lapse support
Best for: Remote monitoring
- Features
- Built-in Camera
- Color
- Black
QIDI chamber camera: 1080p at up to 30 fps, 130° view, f/2.0 lens, time-lapse, works in -20 to 70°C, plugs into a reserved port on Q1 Pro and X-3 series printers.
Pros
- Cheapest QIDI add-on here
- Time-lapse built in
- Tool-free install
Cons
- Older QIDI printers only
- No AI detection mentioned
Good fit if
- You own an X-Max3, X-Plus3, X-Smart3 or Q1 Pro
Skip if
- You own a Max4, Plus5 or Q2
Verdict: An easy remote-view upgrade for older QIDIs.
Specifications side by side
| Spec | QIDI Box Multi-Color 3D Printing System for QIDI Plus5 3D Printer | active drying, nfc intelligent recognition and filament auto-reload, double hardened steel gear for pla/petg/abs/cf/gf/pa/pc | QIDI Polar Cooler for Max4/Q2 | QIDI 3D Printer Camera for QIDI Q1 Pro, X-Max3, X-Plus3, X-Smart3 | hd video, remote monitoring, plug and play, time-lapse support |
|---|---|---|---|
| Color Printing | Multi-Color | not stated | not stated |
| Compatible Material | PLA, PETG, ABS | not stated | not stated |
| Features | not stated | not stated | Built-in Camera |
| Color | Plus5 | not stated | Black |
| Nozzle Material | Hardened Steel | not stated | not stated |
QIDI add-ons by printer
The QIDI Box is sold as separate listings per printer (Plus5, Plus4, Max4 and Q2/Q2C), with the same features described on each; we list the Plus5 version, so Plus4 and Max4 owners should buy the listing named for their machine. The Polar Cooler title names Max4, Q2 and Plus5, while its bullets mention only Max4 and Q2, so Plus5 owners should confirm fit with QIDI. The camera fits the earlier Q1 Pro and X-3 series only, through a reserved port.
Who QIDI accessories suit
These are upgrades for people who already own a QIDI printer: none of them fit other brands. Choose the QIDI Box if you own a Plus5 and want multi-color prints or dry nylon and PVA during long jobs. Choose the Polar Cooler if you run a Max4 or Q2 at high temperature and high flow (QIDI cites 370°C nozzles, 40mm³/s and 800mm/s) and fight heat creep clogs. Choose the camera if you own an X-Max3, X-Plus3, X-Smart3 or Q1 Pro and want to watch prints remotely.
Choosing a QIDI accessory
-
Buy the listing for your QIDI model
The QIDI Box comes as a separate listing for each printer; the Plus5 one is described as designed for the Plus5.
-
Use the QIDI Box for wet filaments
QIDI says the Box dries at 65°C and shows humidity in real time, aimed at nylon and PVA.
-
Fit the Polar Cooler for hot, fast printing
QIDI claims up to 90% fewer clogs from directed cooling around the extruder, throat and filament inlet.
-
Check the QIDI camera's printer list
It names Q1 Pro, X-Max3, X-Plus3 and X-Smart3, not the newer Max4, Plus5 or Q2.
Frequently asked questions
What is the best QIDI 3D printer accessory?
The QIDI Box for Plus5, which adds up to 16-color printing, 65°C drying and NFC spool recognition.
Does the QIDI Box work with every QIDI printer?
Each QIDI Box listing names one printer (Plus5, Plus4, Max4 or Q2/Q2C); buy the one for your model.
Which printers take the QIDI Polar Cooler?
The title lists Max4, Q2 and Plus5; the bullets mention Max4 and Q2 only.
Does the QIDI camera fit the Plus5 or Max4?
No, QIDI lists it for the Q1 Pro, X-Max3, X-Plus3 and X-Smart3.
What resolution is the QIDI chamber camera?
Up to 1920x1080 at 1-30 fps, with a 130° field of view.


