ELEGOO ABS-Like 3.0 Resin 2000g Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO ABS-Like 3.0 sits one step above Standard resin: prints should take drilled holes and knocks without cracking, which is what most people want once they move past display-only models. This 2000g grey bottle is the size to buy once your settings work. ELEGOO's most concrete claim is about flow: viscosity is 25-47% lower than ABS-Like 1.0 and 2.0, so resin returns under the plate faster and peels from the film more easily. It also says the resin will not separate in the bottle, so no stirring is needed. There are no hardness or heat figures, and the 2kg price only pays off if you print often. Our notes come from ELEGOO's product page, not from testing.
What stands out
- Prints take drilled holes and impacts
- Viscosity 25-47% below older ABS-Like versions
- No settling or stirring, per ELEGOO
Who it fits
Good fit for
Resin printers who print a mix of miniatures, prototypes and small mechanical parts, and anyone whose thin supports and limbs keep snapping in standard resin. The 2kg bottle suits people printing every week.
Who should skip it
Buyers who want a stated heat limit (ELEGOO's ABS-Like 3.0+ lists 55°C), people who refuse to keep IPA at home, and first-timers who should test settings on a 1kg bottle before committing to 2kg.
Verdict: ELEGOO's most sensible all-round resin, in a bottle sized for regular printing.
What the listing states
2000g bottle, grey
Twice the usual refill; grey shows surface detail well for painting.
High strength and toughness
Parts can be drilled and survive moderate impacts; ELEGOO names functional prototypes and mechanical parts.
Viscosity 25-47% lower than ABS-Like 1.0/2.0
Faster reflow and easier peeling mean fewer failed layers.
405nm LCD/DLP
Fits nearly all consumer resin printers; ELEGOO says it works best on its own.
Formula and bottle
ELEGOO promises low volume shrinkage for accurate details and a formula that stays mixed over time, which also keeps color even across a print. The spec block lists only 'liquid-3d-printing-materials' as the model and gives a 5.75 x 5.75 x 11.4 inch package, so the bottle needs a tall shelf.
Printing and cleanup
Print at ELEGOO's recommended exposure for your machine, wash in isopropyl alcohol and post-cure. Lower viscosity helps large flat layers release, but you still need supports suited to your model; drilling and tapping work best after full curing.
Before buying
Checks.
Check before you buy
- Your printer has a 405nm light source
- You have an IPA wash setup
- You will use 2kg within a few months
- You do not need a published heat rating
The product at a glance
ELEGOO ABS-Like 3.0 Resin 2000g
Best for: Regular printers
- Resin Type
- ABS-Like
- Curing Wavelength
- 405nm
- Compatible Technology
- MSLA, DLP, LCD
- Net Weight
- 2000g
- Application
- Functional prototypes, mechanical parts
- Printing Technology
- Resin
View on Amazon: ELEGOO ABS-Like 3.0 Resin 2000g Affiliate link
ELEGOO ABS-Like 3.0, grey, 2000g: drillable and impact-resistant, 25-47% lower viscosity than earlier ABS-Like versions, no stirring needed, 405nm LCD/DLP.
Pros
- Tougher than Standard resin
- Flows and peels easily
- Large bottle
Cons
- No hardness or heat figures
- IPA wash
- Large upfront amount
Good fit if
- You print parts that get drilled or handled
- You print weekly
Skip if
- You want water cleanup
- You need a stated heat limit
Verdict: The everyday tough ELEGOO resin in a 2kg bottle.
Specifications side by side
| Spec | ELEGOO ABS-Like 3.0 Resin 2000g |
|---|---|
| Resin Type | ABS-Like |
| Curing Wavelength | 405nm |
| Compatible Technology | MSLA, DLP, LCD |
| Net Weight | 2000g |
| Application | Functional prototypes, mechanical parts |
| Printing Technology | Resin |
| Compatible Material | ABS |
| Features | High Precision |
| Color | Grey |
| Dimensions | 11.4 × 5.75 × 5.75 inches |
| Size | L-2000g |
| Model | liquid-3d-printing-materials |
If you are also weighing a small kitchen blade for trimming supports and prints, our wusthof wusthof gourmet grey 3 review covers its published specs in the same way.
Frequently asked questions
How tough is ELEGOO ABS-Like 3.0 grey?
ELEGOO says prints can be drilled and withstand certain impacts without cracking, but gives no hardness or elongation figures.
What changed in ELEGOO ABS-Like 3.0 versus 2.0?
Mainly flow: viscosity is 25-47% lower than ABS-Like 1.0 and 2.0, which ELEGOO says improves reflow and peeling.
Should ELEGOO ABS-Like 3.0 be stirred before printing?
ELEGOO says it does not separate, so stirring is not needed; a gentle shake of a stored bottle does no harm.
Is there a smaller bottle of ELEGOO ABS-Like 3.0?
Yes, ELEGOO also sells it in 1000g, which is the better buy for a first test.
