Best 405nm UV Resins for Resin 3D Printers in 2026: 9 Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
These are liquid resins, not filaments: 405nm is the UV wavelength that almost every LCD, MSLA and DLP resin printer uses to cure them. Our top pick is ANYCUBIC Standard Resin Plus, which gives real figures (±0.1mm accuracy, 200 cps viscosity) and is rated for 8K-16K screens. SUNLU's grey standard is the cheapest and cures from 365-405nm, ELEGOO and SUNLU cover ABS-like toughness, Siraya Tech has a paint-ready white, ELEGOO Water Washable 2.0 skips alcohol, ANYCUBIC sells a clear, and RESIONE F80 bends like rubber. The 9 picks are based on listing specs; we did not cure them ourselves.
Our top pick: ANYCUBIC Standard Resin Plus 1kg.
Quick picks
The best fit for you
- You want the best all-round grey ANYCUBIC Standard Resin Plus 1kg ANYCUBIC Standard Resin Plus.
- You want the cheapest bottle SUNLU Standard Fast Curing 1kg Resin SUNLU Standard grey.
- Prints get handled a lot ELEGOO ABS-Like 3.0 Pro Resin 1000g ELEGOO ABS-Like 3.0 Pro.
- You want to skip IPA ELEGOO Water Washable Resin 2.0 1KG ELEGOO Water Washable 2.0.
- You need rubbery parts RI Resione F80 Flexible Resin 1kg RESIONE F80.
Our 9 picks
ANYCUBIC Standard Resin Plus 1kg
Best for: Best overall
- Curing Wavelength
- ✓ 405nm
- Printing Technology
- SLA
- Features
- High Speed, High Precision
- Size
- 1KG
- Resin Type
- Standard
- Resolution
- 8K, 16K, 14K
View on Amazon: ANYCUBIC Standard Resin Plus 1kg Affiliate link
ANYCUBIC Standard Resin Plus in grey, 1kg: an upgraded standard 405nm resin with molding accuracy improved from ±0.2mm to ±0.1mm, 200 cps viscosity at 25°C, 18.2% elongation, lighter smell and easier cleaning; made for LCD and DLP printers up to 16K. The flexural figure is printed as '1599.33%' and the spec weight as 3.53 oz, both clearly typos.
Pros
- Real accuracy and viscosity numbers
- Low odor
- Rated for 8K-16K screens
Cons
- Typos in the data
- Must be shaken well for even color
Good fit if
- You want one dependable grey for miniatures and parts
- You print on a newer high-resolution screen
Skip if
- You need flexible or water-wash resin
Verdict: The best-documented everyday 405nm resin.
SUNLU Standard Fast Curing 1kg Resin
Best for: Best budget
- Curing Wavelength
- ✓ 405nm
- Printing Technology
- Resin
- Features
- High Precision, Low Shrinkage, Fast Curing
- Resin Type
- Standard
- Dimensions
- 4.96 × 2.09 × 9.15 inches
- Weight
- 2.2 pounds
View on Amazon: SUNLU Standard Fast Curing 1kg Resin Affiliate link
SUNLU Standard resin in grey, 1kg: low shrink, easy to paint, cleans with isopropyl alcohol or ethanol, and cures across 365-405nm, so it suits almost any LCD, DLP or SLA machine.
Pros
- Cheapest bottle here
- Widest stated wavelength range
- Paints easily
Cons
- Standard resin is brittle
- Needs alcohol washing
Good fit if
- You are buying your first resin
- You own an older or unusual printer
Skip if
- Your prints must survive drops
Verdict: Low-cost resin that fits nearly any printer.
ELEGOO ABS-Like 3.0 Pro Resin 1000g
Best for: Best ABS-like
- Curing Wavelength
- ✓ 405nm
- Printing Technology
- Resin
- Compatible Material
- ABS
- Features
- High Precision, Fast Curing, Non-Brittle
- Color
- Grey
- Resin Type
- ABS-Like
View on Amazon: ELEGOO ABS-Like 3.0 Pro Resin 1000g Affiliate link
ELEGOO ABS-Like 3.0 Pro in grey, 1kg: about 10% higher heat deformation temperature than ABS-Like 3.0, better scratch resistance, bends before it breaks, for 405nm MSLA, DLP and LCD printers.
Pros
- Scratch and heat improvements
- Tough for snap fits
- Low price for ABS-like
Cons
- Heat gain given only as a percentage
- No viscosity figure
Good fit if
- You print gaming minis that get handled
- You print small functional parts
Skip if
- You need full datasheet numbers
Verdict: Tougher, scratch-resistant 405nm resin.
Siraya Tech Fast ABS-Like Resin 1kg White
Best for: Best white
- Curing Wavelength
- ✓ 405nm
- Printing Technology
- Resin
- Compatible Material
- ABS
- Features
- High Precision, Non-Brittle
- Color
- White
- Size
- 1KG
View on Amazon: Siraya Tech Fast ABS-Like Resin 1kg White Affiliate link
Siraya Tech Fast ABS-Like in white, 1kg: a stiff-but-tough resin that cleans with an air gun and alcohol spray, low odor, 8K capable on LCD and DLP printers, aimed at tabletop models and busts.
Pros
- Easy cleanup
- Not fragile
- Smooth white surface for painting
Cons
- Priced near the top
- No wavelength range beyond 405nm
Good fit if
- You print busts and want a primer-like white
- You want fast, simple cleanup
Skip if
- You shop on price
Verdict: Paint-ready white from a respected resin maker.
SUNLU ABS-Like 3D Printer Resin 2000g
Best for: Best value bottle
- Curing Wavelength
- ✓ 405nm
- Printing Technology
- SLA
- Compatible Material
- ABS
- Features
- High Speed, High Precision, Low Shrinkage, Non-Brittle
- Resin Type
- ABS-Like
- Resolution
- 8K, 4K
View on Amazon: SUNLU ABS-Like 3D Printer Resin 2000g Affiliate link
SUNLU ABS-Like resin in dark grey, 2kg: less brittle with good abrasion resistance, fast 405nm curing, light odor, stable in damp conditions after curing, in a leak-proof bottle with an air bag.
Pros
- 2kg lowers cost per kilo
- Leak-proof packaging
- Tough for small parts
Cons
- Large bottle ages if you print little
- No numbers on toughness
Good fit if
- You print often and use resin up
- You want a darker grey to see detail
Skip if
- You print once a month
Verdict: A big bottle of tough grey 405nm resin.
ELEGOO ABS-Like 3.0 Resin 2000g Clear Red
Best for: Best translucent
- Curing Wavelength
- ✓ 405nm
- Printing Technology
- Resin
- Compatible Material
- ABS
- Resin Type
- ABS-Like
- Dimensions
- 5.91 × 3.54 × 7.87 inches
- Weight
- 4.85 pounds
View on Amazon: ELEGOO ABS-Like 3.0 Resin 2000g Clear Red Affiliate link
ELEGOO ABS-Like 3.0 in clear red, 2kg: tough enough to take drilling, resists settling so it needs less stirring, and runs 25-47% lower viscosity than ABS-Like 1.0 for faster peeling.
Pros
- See-through red
- Viscosity drop stated
- Less settling in the vat
Cons
- 2kg is a lot of one color
- Clear prints show cure marks
Good fit if
- You print gems, lenses or light pieces
- You want a tough translucent resin
Skip if
- You only print opaque grey minis
Verdict: Tough, see-through red in a large bottle.
ELEGOO Water Washable Resin 2.0 1KG
Best for: Best water-washable
- Curing Wavelength
- ✓ 405nm
- Printing Technology
- Resin
- Features
- Low Shrinkage
- Size
- 1KG
- Resin Type
- Water Washable
View on Amazon: ELEGOO Water Washable Resin 2.0 1KG Affiliate link
ELEGOO Water Washable 2.0 in blue, 1kg: rinses with water instead of IPA, viscosity 109.40 mPa·s at 25°C (76% lower than version 1.0), fast curing, for 405nm LCD printers. Few bottles were listed when we checked.
Pros
- No alcohol needed
- Very low viscosity
- Stated viscosity number
Cons
- Limited stock
- Water rinse still needs safe disposal
Good fit if
- You want to skip IPA
- You print in a small apartment
Skip if
- You need ABS-like toughness
Verdict: Alcohol-free cleanup with low viscosity.
ANYCUBIC 1kg 405nm UV Resin
Best for: Best clear
- Curing Wavelength
- ✓ 405nm
- Printing Technology
- Resin
- Features
- High Precision, Fast Curing
- Size
- 1KG
- Dimensions
- 4.33 × 4.33 × 10.3 inches
- Weight
- 2.2 pounds
View on Amazon: ANYCUBIC 1kg 405nm UV Resin Affiliate link
ANYCUBIC standard resin in clear, 1kg: low shrink, quick cure, a balance of hardness and toughness for easy support removal, and compatible with all DLP and LCD printers per ANYCUBIC.
Pros
- Fully clear
- Broad compatibility claim
- Easy support removal
Cons
- Needs a full shake before use
- Clear yellows if over-cured
Good fit if
- You print display pieces or light pipes
- You run an ANYCUBIC Photon
Skip if
- You want color without paint
Verdict: Clear standard resin at a fair price.
RI Resione F80 Flexible Resin 1kg
Best for: Best flexible
- Curing Wavelength
- ✓ 405nm
- Material Type
- Resin
- Net Weight
- 1kg
- Shore Hardness
- 50-60A
- Color
- Black
- Weight
- 2.2 pounds
View on Amazon: RI Resione F80 Flexible Resin 1kg Affiliate link
RESIONE F80 in black, 1kg: elastic resin at Shore 50-60A that springs back after squeezing and stays soft below 10°C, for LCD, MSLA and DLP printers, mono or RGB screens.
Pros
- Truly rubbery
- Stays soft in the cold
- Works on mono and RGB screens
Cons
- Most expensive bottle here
- Not for rigid models
Good fit if
- You print seals, tires or soft prototypes
- You need parts that bend fully
Skip if
- You print display miniatures
Verdict: A real flexible 405nm resin.
Specifications side by side
| Spec | ANYCUBIC Standard Resin Plus 1kg | SUNLU Standard Fast Curing 1kg Resin | ELEGOO ABS-Like 3.0 Pro Resin 1000g | Siraya Tech Fast ABS-Like Resin 1kg White | SUNLU ABS-Like 3D Printer Resin 2000g | ELEGOO ABS-Like 3.0 Resin 2000g Clear Red | ELEGOO Water Washable Resin 2.0 1KG | ANYCUBIC 1kg 405nm UV Resin | RI Resione F80 Flexible Resin 1kg |
|---|---|---|---|---|---|---|---|---|---|
| Material Type | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | Resin |
| Net Weight | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | 1kg |
| Shore Hardness | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | 50-60A |
| Printing Technology | SLA | Resin | Resin | Resin | SLA | Resin | Resin | Resin | Resin |
| Compatible Material | not stated | not stated | ABS | ABS | ABS | ABS | not stated | not stated | not stated |
| Features | High Speed, High Precision | High Precision, Low Shrinkage, Fast Curing | High Precision, Fast Curing, Non-Brittle | High Precision, Non-Brittle | High Speed, High Precision, Low Shrinkage, Non-Brittle | not stated | Low Shrinkage | High Precision, Fast Curing | not stated |
| Color | Gray | 1000g Grey | Grey | White | 2000g-dark Grey | Clear Red | Blue 1kg | Clear | Black |
| Size | 1KG | M-1000g | M-1000g | 1KG | L-2000g | 2000g | 1KG | 1KG | 1KG |
| Resin Type | Standard | Standard | ABS-Like | Standard, ABS-Like | ABS-Like | ABS-Like | Water Washable | not stated | not stated |
| Curing Wavelength | 405nm | 405nm | 405nm | 405nm | 405nm | 405nm | 405nm | 405nm | 405nm |
| Resolution | 8K, 16K, 14K | not stated | not stated | 8K | 8K, 4K | not stated | not stated | not stated | not stated |
| Dimensions | 1.3 × 1.3 × 4.3 inches | 4.96 × 2.09 × 9.15 inches | 3.82 × 3.82 × 8.66 inches | 5.12 × 5.94 × 8.46 inches | 3.94 × 3.94 × 3.94 inches | 5.91 × 3.54 × 7.87 inches | not stated | 4.33 × 4.33 × 10.3 inches | not stated |
| Weight | 3.53 ounces | 2.2 pounds | not stated | 2.2 pounds | 4.41 pounds | 4.85 pounds | not stated | 2.2 pounds | 2.2 pounds |
| Model | not stated | Fast Curing Standard 3D Printer Resin | EL-3D-AR002 | ST0009 | SUNLU ABS Like Resin | US-EHJ-3DL-A109-1 | not stated | POT067 | F80-CA-P |
How to choose a 405nm resin
-
Standard or ABS-like
Choose ANYCUBIC Standard Plus if you print display minis; choose ELEGOO ABS-Like 3.0 Pro or SUNLU ABS-Like if prints get dropped or snapped together.
-
Check cleaning
Water-washable resin rinses with water but the rinse water still holds uncured resin; cure it in sunlight before disposal.
-
Mind bottle size
SUNLU's and ELEGOO's 2kg bottles cost less per kilo, but resin keeps best when used within months.
-
Wear gloves
All of these are uncured photopolymers; nitrile gloves and ventilation apply to every bottle.
Frequently asked questions
Is 405nm resin the same as filament?
No. It is a liquid photopolymer cured by UV light in a resin printer; filament melts in an FDM printer.
Will 405nm resin work in my printer?
Almost certainly if it is a mono LCD, MSLA or DLP machine; SUNLU's standard grey also lists 365-405nm.
Which 405nm resin here has the lowest viscosity?
ELEGOO Water Washable 2.0, at 109.40 mPa·s at 25°C.
How soft is RESIONE F80?
Shore 50-60A, similar to a rubber eraser, and it stays soft below 10°C.
See also
- best ABS-Like resins 1kg bottles
- best standard 3d printer resins under 20
- best bulk SLA 3d printer resins
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- best document scanners with duplex printing
- best nvme SSDs with 3D NAND








