ELEGOO Water Washable Resin 2.0 Blue 1kg Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The blue 1kg bottle of ELEGOO Water Washable Resin 2.0 is a good fit for resin printer owners who want to rinse parts in tap water instead of handling isopropyl alcohol. ELEGOO lists a viscosity of 109.40 mPa.s at 25°C, which it puts 76% below its first water washable formula, and cures it at 405nm, the wavelength used by most LCD resin printers. A blue tint shows layer lines and surface detail more clearly than clear or white resin, which helps when you check miniatures or test prints. ELEGOO's bullets stay general on the rest: no exposure times, hardness or tensile figures appear, so start from your printer's water washable profile and run an exposure test.
What stands out
- Rinses clean in water, no IPA needed
- 109.40 mPa.s viscosity at 25°C
- 405nm cure for common LCD printers
Who it fits
Good fit for
Home resin printers who print tabletop models or test parts and want a blue color that shows surface detail, with a water rinse instead of alcohol.
Who should skip it
Anyone who needs published exposure settings, strength data or a tough engineering resin for parts that take load.
Verdict: A practical low-viscosity water washable resin; the blue color is about seeing detail, and the listing leaves exposure tuning to you.
Blue WW 2.0 at a glance
Water washable formula
Uncured resin rinses off in water rather than IPA.
109.40 mPa.s at 25°C
Thin flow for faster recoating between layers.
76% lower viscosity than 1.0
ELEGOO's own comparison with its first formula.
405nm UV curing
Matches most LCD/MSLA resin printers.
Blue, 1000g bottle
One kilogram; other colors and 2kg bottles exist.
No exposure times listed
Calibrate with a test print first.
What the formula promises
ELEGOO claims lower shrinkage than its 1.0 resin for sharper edges and smoother faces, plus faster curing that shortens print time. These are maker claims without numbers apart from the viscosity figure. The listing says it suits models and parts that need some strength or toughness, but it gives no Shore hardness or elongation, so treat it as a model resin rather than a functional one.
Washing and curing at home
Water cleanup is the reason to pick this bottle: rinse prints in a container of water, then post-cure under 405nm light. Water that carries uncured resin still needs care: cure it in sunlight or a UV lamp before disposal instead of pouring it down the drain. Wear gloves as with any resin, and keep the room warm, since viscosity figures are given at 25°C.
Before you buy
Checks for ELEGOO WW 2.0 blue.
Check before you buy
- Your resin printer cures at 405nm
- You prefer water over IPA for washing
- You will calibrate exposure on a test model
- You need model detail more than part strength
The product at a glance
ELEGOO Water Washable Resin 2.0 1KG
Best for: Water-cleanup model printing
- Printing Technology
- Resin
- Features
- Low Shrinkage
- Size
- 1KG
- Resin Type
- Water Washable
- Curing Wavelength
- 405nm
View on Amazon: ELEGOO Water Washable Resin 2.0 1KG Affiliate link
ELEGOO Water Washable Resin 2.0, blue 1kg: rinses in water, 109.40 mPa.s viscosity at 25°C, 405nm curing; no exposure, hardness or strength data listed.
Pros
- No IPA needed for washing
- Low listed viscosity
- Blue shows surface detail
Cons
- No exposure settings given
- No strength figures
Good fit if
- You want water cleanup
- You print models and minis
Skip if
- You need tough functional parts
Verdict: A low-viscosity water washable resin in an easy-to-inspect blue.
Specifications side by side
| Spec | ELEGOO Water Washable Resin 2.0 1KG |
|---|---|
| Printing Technology | Resin |
| Features | Low Shrinkage |
| Size | 1KG |
| Resin Type | Water Washable |
| Curing Wavelength | 405nm |
| Color | Blue 1kg |
Frequently asked questions
Does ELEGOO Water Washable Resin 2.0 need IPA?
No. ELEGOO says it cleans with water alone, without alcohol or IPA.
What viscosity does the blue 2.0 resin have?
ELEGOO lists 109.40 mPa.s at 25°C.
Which printers can use it?
Most LCD resin printers with a 405nm UV light source.
Are exposure times listed for this ELEGOO resin?
No. Start from your printer's water washable profile and adjust with a test print.
Blue or a clear color of the same resin?
Pick blue if you want surface detail easy to inspect on miniatures; pick a clear color if you want translucent parts.
Featured in
See also
- gratkit silk dual color pla review
- kingroon silk pla red filament review
- kingroon pa6 cf filament 1 75mm review
- elegoo pla filament review
- elegoo pla plus filament review
- ELEGOO Matte PLA Filament 1.75mm Review: Who It Fits and Who Should Skip It
- ELEGOO Rapid PETG Filament 1.75mm Review (2026): A Spec-Based Look
- ELEGOO 1.75mm Black PETG Filament Review: Who It Fits and Who Should Skip It
- best ELEGOO 3d printers
- unxuey 50pcs 3d printer heatsink review
