As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

ANYCUBIC Standard 405nm Resin (Clear, 1kg) Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This is ANYCUBIC's basic standard resin in the clear color and the 1kg bottle (model POT067). Clear is the reason to pick it over the grey or white of the same line: it lets light through, so it suits lamp shades, light pipes, gem-style miniatures and parts where you want to see inside. ANYCUBIC promises low shrinkage, quick curing, good flow and a mix of hardness and toughness that releases cleanly from the plate. It is sold as working with all DLP and LCD printers, best with ANYCUBIC's own. The listing gives no exposure times, viscosity or hardness, so plan on a calibration print. Our verdict uses ANYCUBIC's listing and published specs, not a sample bottle.

What stands out

  • Clear color for see-through prints
  • Low shrinkage, quick curing
  • 405nm, fits LCD and DLP printers
  • 1kg bottle packed in bubble wrap

Who it fits

Good fit for

Resin users who want an inexpensive clear standard resin for light-catching models, lamp parts and display pieces.

Who should skip it

Anyone needing optically crystal-clear parts straight off the printer or parts that must flex; this is a general-purpose standard resin.

Verdict: A simple clear resin for display work on any 405nm LCD printer; expect post-processing for real transparency.

ANYCUBIC clear 1kg resin, key facts

405nm UV curing

Matches nearly all hobby LCD resin printers.

Clear, 1kg

See-through color in a full-size bottle.

Low shrinkage

Parts hold their modeled size.

Hardness + toughness balance

Releases from the plate without cracking.

Model POT067

ANYCUBIC's code for the clear 1kg bottle.

What clear standard resin is good at

Clear resin shows internal supports and layer lines, so it rewards clean models and careful orientation. Most clear resins also pick up a slight yellow tint if they are post-cured too long under UV. ANYCUBIC says cured parts stay stable in damp and corrosive conditions, but treat it as a display resin, not an engineering one.

Working with ANYCUBIC clear resin

Shake the bottle well before pouring; ANYCUBIC warns that unmixed resin can print with uneven color. Start from your printer's ANYCUBIC standard resin profile and run an exposure test. For glass-like results, wash, dry and give a light coat of clear finish, keeping the UV post-cure short.

Before buying ANYCUBIC clear 1kg resin

Quick checks.

Check before you buy

  • Your printer cures at 405nm (LCD or DLP) for ANYCUBIC POT067
  • You will shake the ANYCUBIC clear bottle before every pour
  • Your clear ANYCUBIC prints can take a gloss coat for full clarity

The product at a glance

ANYCUBIC 1kg 405nm UV Resin

Best for: Clear display prints

Printing Technology
Resin
Features
High Precision, Fast Curing
Size
1KG
Curing Wavelength
405nm
Dimensions
4.33 × 4.33 × 10.3 inches
Weight
2.2 pounds

View on Amazon: ANYCUBIC 1kg 405nm UV Resin Affiliate link

ANYCUBIC standard 405nm resin, clear 1kg: low-shrinkage, quick-curing resin for LCD and DLP printers, aimed at see-through display parts.

Pros

  • Clear color for light effects
  • Works on any 405nm LCD/DLP printer
  • Low shrinkage

Cons

  • No exposure or hardness data
  • Needs a gloss coat for full clarity
  • Standard resin, not for flexing parts

Good fit if

  • You print lamp shades or gem-style minis

Skip if

  • Your ANYCUBIC prints must bend

Verdict: A low-cost clear resin for display pieces.

Specifications side by side

Spec ANYCUBIC 1kg 405nm UV Resin
Printing Technology Resin
Features High Precision, Fast Curing
Size 1KG
Curing Wavelength 405nm
Dimensions 4.33 × 4.33 × 10.3 inches
Weight 2.2 pounds
Color Clear
Model POT067

Frequently asked questions

Which printers can use ANYCUBIC clear standard resin?

ANYCUBIC says all DLP and LCD printers, with its own LCD printers working best.

Is ANYCUBIC clear 405nm resin fully transparent?

It is clear, but like most clear resins, prints usually need a gloss coat to look glass-like.

Why shake ANYCUBIC resin before use?

ANYCUBIC says unmixed components and color paste can leave uneven coloring.

Does the ANYCUBIC clear resin listing give exposure settings?

No, so run a calibration print first.

See also