RESIONE F80 Flexible Resin 1kg Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
F80 is RESIONE's rubber-like resin, curing to a Shore hardness of 50-60A, which is roughly the feel of a soft eraser or pencil grip. This black 1kg bottle sells for under $75 and is aimed at elastic parts: toy tires, shoe samples, seals, bumpers and flexible prototypes, while a pink version targets dental gum models. RESIONE says prints spring back quickly after squeezing and stay soft even below 10°C, though they lose some elasticity in the cold. It runs on mainstream LCD, MSLA and DLP printers with mono or RGB screens. The title promises high elongation at break but gives no figure. Our notes come from RESIONE's listing.
What stands out
- Shore 50-60A soft feel
- Quick shape recovery
- Stays soft below 10°C
- Mono, RGB LCD and DLP compatible
Who it fits
Good fit for
Resin users who need squeezable parts such as gaskets, grips, RC tires or shoe prototypes without switching to TPU on an FDM machine.
Who should skip it
Anyone needing a rigid or tough resin for figures and brackets; F80 bends by design. Users who need exact tensile or tear numbers will not find them here.
Verdict: A soft elastic resin for flexible parts, light on test data.
F80 properties in practice
Shore 50-60A
Soft and rubbery; it compresses under finger pressure.
Good resilience
Returns to shape after bending or squeezing.
Cold flexibility
Remains soft under 10°C, with lower elasticity.
405nm, LCD/MSLA/DLP
Works on most hobby resin printers.
Missing numbers
RESIONE quotes no elongation percentage, tensile strength or exposure times, even though the title highlights high elongation. The model code is F80-CA-P. Soft resins usually need careful supports and longer exposures; ask RESIONE for a starting profile for your printer.
Printing soft parts
Flexible prints can sag on thin supports, so use thicker ones and orient parts to limit suction. Wash gently, since uncured soft resin tears easily, then post-cure fully to reach the listed hardness.
F80 buying checks
Before you order.
Check before you buy
- You want rubbery, not rigid parts
- Black suits the project
- Your printer is 405nm
- You can tune exposure yourself
The product at a glance
RI Resione F80 Flexible Resin 1kg
Best for: Flexible resin parts
- Material Type
- Resin
- Net Weight
- 1kg
- Shore Hardness
- 50-60A
- Color
- Black
- Curing Wavelength
- 405nm
- Weight
- 2.2 pounds
View on Amazon: RI Resione F80 Flexible Resin 1kg Affiliate link
RESIONE F80: a black 1kg flexible 405nm resin curing to Shore 50-60A, with quick shape recovery and cold flexibility, for seals, tires and soft prototypes.
Pros
- Genuinely soft Shore A hardness
- Springs back after deformation
- Wide printer compatibility
Cons
- No elongation figure despite the title
- No exposure settings
Good fit if
- You print gaskets or RC tires
- You prototype shoe parts
Skip if
- You need rigid miniatures
- You need datasheet values
Verdict: A soft rubber-like resin for flexible parts.
Specifications side by side
| Spec | RI Resione F80 Flexible Resin 1kg |
|---|---|
| Material Type | Resin |
| Net Weight | 1kg |
| Shore Hardness | 50-60A |
| Printing Technology | Resin |
| Color | Black |
| Size | 1KG |
| Curing Wavelength | 405nm |
| Weight | 2.2 pounds |
| Model | F80-CA-P |
Frequently asked questions
How soft is RESIONE F80?
Shore 50-60A after printing.
What is RESIONE F80 black used for?
Toy tires, shoe samples, seals, buffers and elastic prototypes.
Does RESIONE F80 stay flexible in the cold?
Yes, below 10°C it stays soft, though less elastic.
Will RESIONE F80 work on an RGB-screen printer?
Yes, RESIONE lists mono and RGB LCD printers plus DLP.
Featured in
See also
- resione tough74 resin review
- resione d01s dental model resin review
- esun pla filament 1 75mm review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- tkid 3d printer kids review
- hyako s1 3d flexible back review
