As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

ELEGOO ABS-Like 3.0 Clear Red Resin 2kg Review: Who It Fits and Who Should Skip It

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

ELEGOO ABS-Like 3.0 in Clear Red is a 2000g bottle of tough 405nm resin with a translucent red tint, for LCD and DLP printers. The color is the point: light passes through, so it suits lamp covers, gem-like props, tail-light mockups and see-through display pieces where an opaque grey would hide the effect. The 3.0 formula keeps the line's toughness, with ELEGOO saying parts survive impacts and even drilling without cracking. It also flows better, with 25-47% lower viscosity than ABS-Like 1.0, and ELEGOO says it does not separate in the bottle, cutting down on stirring. Two kilos suits frequent printers. No exposure settings or clarity figures are given. The clear red bottle's page is our only source.

What stands out

  • Translucent red, light-passing
  • Tough enough to drill, per ELEGOO
  • 25-47% lower viscosity than 1.0

Who it fits

Good fit for

Resin printer owners making props, light covers and display pieces in a tinted see-through red, who print often enough to use 2kg.

Who should skip it

Anyone printing miniatures where detail must be read at a glance, or who wants a fully water-clear result or listed exposure times.

Verdict: A tough translucent red resin in a bulk bottle; good for props and light effects, less so for detail inspection.

ABS-Like 3.0 Clear Red specs

Clear red tint

Translucent; thickness changes the depth of color.

High toughness

Survives impacts and drilling, per ELEGOO.

Viscosity 25-47% below ABS-Like 1.0

Faster reflow and easier peel.

No settling in the bottle

Color stays even with less stirring.

Low shrinkage, 405nm

Accurate on LCD/DLP printers.

2000g bottle

Bulk size; no exposure data.

Formula and tint

ABS-Like 3.0 builds on the 2.0 resin's toughness while lowering viscosity, so it peels from the release film more easily. ELEGOO says the liquid stays mixed whether printing or standing, which keeps the red even from part to part. Translucent resins show internal supports and voids, so hollow models and supports placement matter more than with opaque colors. The model code is US-EHJ-3DL-A109-1.

Printing clear red resin

Run an exposure test first; tinted clear resins can over-cure and lose detail if exposure is too long. Wash thoroughly, since leftover resin clouds the surface. Cure briefly, as long UV cures can darken the red. A thin coat of gloss clear varnish brings back transparency on sanded surfaces.

Before you buy

Checks for ELEGOO ABS-Like 3.0 Clear Red.

Check before you buy

  • You want a see-through red
  • You print props or light covers
  • You use 2kg before it ages
  • You will calibrate exposure

The product at a glance

ELEGOO ABS-Like 3.0 Resin 2000g Clear Red

Best for: Translucent red props

Printing Technology
Resin
Compatible Material
ABS
Resin Type
ABS-Like
Curing Wavelength
405nm
Dimensions
5.91 × 3.54 × 7.87 inches
Weight
4.85 pounds

View on Amazon: ELEGOO ABS-Like 3.0 Resin 2000g Clear Red Affiliate link

ELEGOO ABS-Like 3.0 Clear Red 2000g: tough 405nm resin, translucent red, 25-47% lower viscosity than ABS-Like 1.0, no settling, low shrinkage; no exposure data.

Pros

  • Translucent red effect
  • Tough and drillable
  • Bulk 2kg bottle

Cons

  • Detail harder to inspect
  • No exposure settings

Good fit if

  • You print props or covers
  • You print resin often

Skip if

  • You print fine minis

Verdict: Tough see-through red resin for props.

Specifications side by side

Spec ELEGOO ABS-Like 3.0 Resin 2000g Clear Red
Printing Technology Resin
Compatible Material ABS
Resin Type ABS-Like
Curing Wavelength 405nm
Dimensions 5.91 × 3.54 × 7.87 inches
Weight 4.85 pounds
Size 2000g
Color Clear Red
Model US-EHJ-3DL-A109-1

Frequently asked questions

Is ELEGOO ABS-Like 3.0 Clear Red transparent?

It is translucent red; thin parts pass more light than thick ones.

How tough is it?

ELEGOO says parts can take impacts and drilling without cracking.

How runny is it?

ELEGOO states 25-47% lower viscosity than ABS-Like 1.0.

Does ELEGOO list exposure times?

No settings appear on the page.

Clear red or grey ABS-Like 3.0?

Choose clear red for props and light effects; choose grey for miniatures where detail must be easy to see.

See also