SUNLU Fast Curing Standard Resin Grey 1kg Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
SUNLU's Fast Curing Standard resin is the plain, low-cost bottle in its range, and the grey 1kg version is the one most beginners reach for. The listing is honest about what it is: an easy-flowing resin that works across printers and speeds, shrinks little so parts keep their size, and gives a hard, smooth surface that takes paint easily, which is why it suits hand-finished models and display pieces. Cured parts tolerate weak acids and grease without deforming. Cleanup uses isopropyl alcohol or ethanol, and the odor is described as light. SUNLU sells it in solid, clear and macaron colors, and the bottle has a patented leak-proof design. One detail to note: the title says 395-405nm, while a bullet says 365-405nm and claims compatibility with 99% of LCD, DLP and SLA printers; either way, common 405nm machines are covered. There is no hardness or exposure data, so expect a test print first. This review draws on SUNLU's listing alone.
What stands out
- Budget standard resin, grey 1kg
- Hard, smooth, easy-to-paint surface
- Clean with IPA or ethanol
- Leak-proof bottle
Who it fits
Good fit for
Beginners and painters who want an affordable grey resin for display models, terrain and practice prints.
Who should skip it
Anyone printing parts that will bend or take impacts; a tougher ABS-like or nylon-like resin fits better.
Verdict: An easy, cheap grey resin for painted models; not for parts under stress.
SUNLU standard grey resin, in short
Standard, fast curing
Forms easily for novices.
Low shrinkage
Parts keep their modeled size.
Hard, smooth surface
Primes and paints without much sanding.
IPA or ethanol wash
No special cleaner needed.
395-405nm (title) / 365-405nm (bullet)
Covers common 405nm printers.
A beginner's resin
SUNLU positions this as the cost-effective option: no special handling, good flow and forgiving across printers. Grey is a practical choice because it shows layer lines and flaws before painting. Like most standard resins it is hard rather than tough, so thin parts can snap.
Using SUNLU standard grey
Start with your printer's standard resin profile and print an exposure test. Wash prints in IPA or ethanol, let them dry, then post-cure. Prime and paint once fully cured; the hard surface takes paint well.
Before buying SUNLU standard grey resin
Short checks.
Check before you buy
- Your SUNLU grey prints are display models, not load-bearing parts
- You have IPA or ethanol on hand for SUNLU resin cleanup
- Your printer cures at 405nm
The product at a glance
SUNLU Standard Fast Curing 1kg Resin
Best for: Beginners and painted models
- Printing Technology
- Resin
- Features
- High Precision, Low Shrinkage, Fast Curing
- Resin Type
- Standard
- Curing Wavelength
- 405nm
- Dimensions
- 4.96 × 2.09 × 9.15 inches
- Weight
- 2.2 pounds
View on Amazon: SUNLU Standard Fast Curing 1kg Resin Affiliate link
SUNLU Fast Curing Standard resin, grey 1kg: a low-cost, low-shrinkage resin with a hard surface that paints easily and cleans with IPA or ethanol.
Pros
- Low cost per bottle
- Paint-friendly hard surface
- Simple IPA or ethanol cleanup
Cons
- Hard but not tough
- Wavelength range differs on the page
- No exposure data
Good fit if
- You print painted display models
Skip if
- Your parts must flex or take impacts
Verdict: A sensible first resin for painted models.
Specifications side by side
| Spec | SUNLU Standard Fast Curing 1kg Resin |
|---|---|
| Printing Technology | Resin |
| Features | High Precision, Low Shrinkage, Fast Curing |
| Resin Type | Standard |
| Curing Wavelength | 405nm |
| Dimensions | 4.96 × 2.09 × 9.15 inches |
| Weight | 2.2 pounds |
| Size | M-1000g |
| Color | 1000g Grey |
| Model | Fast Curing Standard 3D Printer Resin |
Frequently asked questions
Is SUNLU standard grey resin good for beginners?
SUNLU calls it easy to use with strong flow and suitable for novices.
How do I clean SUNLU standard resin prints?
With isopropyl alcohol or ethanol.
What wavelength does SUNLU standard resin need?
The title says 395-405nm; a bullet says 365-405nm.
Can SUNLU standard grey resin be painted?
Yes, SUNLU says its hard, smooth surface is easy to color.
Featured in
- Best 3D Printer Resins Under $30 in 2026: 7 Picks Ranked by Specs
- Best 3D Printer Resins by Type in 2026: 9 Picks Compared
- Best 405nm UV Resins for Resin 3D Printers in 2026: 9 Picks
- Best 405nm 3D Printer Resins by Type in 2026: 7 Picks
- Best Standard 3D Printer Resins: 6 Spec-Based Picks
- Best Resins for Resin 3D Printers in 2026: 8 Picks Ranked by Specs
See also
- sunlu kidoodle mini 3d printer review
- amolen silk dual color pla review
- anycubic standard 405nm clear resin 1kg review
- sunlu pla filament review
- sunlu pla plus 2 0 filament review
- SUNLU PLA Plus Filament 1.75mm Review: Who It Fits and Who Should Skip It
- SUNLU 1kg Transparent PETG Filament Review (2026): A Spec-Based Look
- SUNLU 1KG Wood Fiber PLA Review: Specs, Pros and Cons
- epiphone sg standard review
- mophie powerstation fast 20 review
