Best Bulk SLA 3D Printer Resins, 2kg and Up: 7 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
SLA here means resin, not filament: these liquids cure under 405nm light in SLA, MSLA (the LCD-masked kind most hobby printers use), DLP and LCD machines. This list covers only bulk buys of 2kg or more. Our top pick is ELEGOO ABS-Like 3.0 Pro in a 3kg bottle, tough and scratch resistant for handled prints. ELEGOO Standard 2.0 2kg is the cheapest, the ELEGOO 3kg set mixes three colors, ANYCUBIC sells 4kg of black and a 2kg tough resin, SUNLU's 2kg ABS-like is a value pick, and ELEGOO's 8K water-washable skips alcohol. All 7 come from listing details, not our own prints.
Our top pick: ELEGOO ABS-Like 3.0 Pro Grey Resin 3000g.
Quick picks
The best fit for you
- You print handled parts in volume ELEGOO ABS-Like 3.0 Pro Grey Resin 3000g ELEGOO ABS-Like 3.0 Pro 3kg.
- You want the cheapest bulk resin ELEGOO Standard 2.0 Grey Resin 2000g ELEGOO Standard 2.0 2kg.
- You want several colors ELEGOO Standard Resin 3000g Multi-Color Pack ELEGOO 3kg grey, black and translucent.
- Prints must survive drops ANYCUBIC Tough Resin 2.0, 3D Printer Resin with Upgraded High Toughness and High Precision, 365-405nm Fast Curing 3D Resin for 4K 8K LCD/DLP/SLA 3D Printing (Grey+Grey, 2kg) ANYCUBIC Tough Resin 2.0.
- You want to skip IPA ELEGOO 8K Water-Washable 2.0 Resin 2000g ELEGOO 8K Water-Washable 2.0.
Our 7 picks
ELEGOO ABS-Like 3.0 Pro Grey Resin 3000g
Best for: Best overall
- Printing Technology
- Resin
- Compatible Material
- ABS
- Features
- High Precision, Non-Brittle
- Color
- Grey
- Resin Type
- ABS-Like
View on Amazon: ELEGOO ABS-Like 3.0 Pro Grey Resin 3000g Affiliate link
ELEGOO ABS-Like 3.0 Pro in grey, 3kg: one large bottle of ELEGOO's scratch-resistant ABS-like resin, with heat deformation about 10% higher than ABS-Like 3.0, tough enough to bend rather than snap, for MSLA, DLP and LCD printers.
Pros
- Biggest single bottle here
- Scratch and heat upgrades
- Tough for handled parts
Cons
- 3kg of grey is a commitment
- Heat gain given only as a percent
Good fit if
- You print a lot of gaming minis or parts
- You run a large Saturn or Jupiter vat
Skip if
- A 3kg bottle would sit half-used for months
Verdict: Three kilos of the toughest ELEGOO formula.
ELEGOO Standard 2.0 Grey Resin 2000g
Best for: Best budget
- Printing Technology
- Resin
- Features
- High Precision, Low Odor
- Resin Type
- Standard
- Curing Wavelength
- 405nm
View on Amazon: ELEGOO Standard 2.0 Grey Resin 2000g Affiliate link
ELEGOO Upgraded Standard 2.0 in grey, 2kg: low shrinkage, fast curing with good fluidity, proper hardness, bright pigments, and a leak-proof bottle wrapped for shipping; best on LCD printers.
Pros
- Lowest price for 2kg here
- Easy, forgiving standard resin
- Leak-proof bottle
Cons
- Standard resin is brittle
- No numbers given
Good fit if
- You print display minis in quantity
- You want the cheapest big bottle
Skip if
- Prints must survive drops
Verdict: Cheap bulk grey for display prints.
ELEGOO Standard Resin 3000g Multi-Color Pack
Best for: Best color mix
- Printing Technology
- Resin
- Resin Type
- Standard
- Curing Wavelength
- 405nm
- Dimensions
- 3.82 × 3.82 × 8.66 inches
View on Amazon: ELEGOO Standard Resin 3000g Multi-Color Pack Affiliate link
ELEGOO Standard resin 3kg set: three 1kg bottles in grey, black and translucent, low shrinkage so cured prints do not deform or crack over time, low viscosity and low odor, for Mars, Saturn and Jupiter printers.
Pros
- Three useful colors
- Bottles open one at a time
- Low odor
Cons
- Standard, not tough
- No figures
Good fit if
- You want grey for minis, black for parts and clear for effects
- You prefer smaller bottles that stay fresh
Skip if
- Every print you make is the same grey
Verdict: Three everyday colors in one order.
ANYCUBIC 4kg Standard 405nm UV Resin
Best for: Best 4kg bundle
- Printing Technology
- Resin
- Features
- High Precision, Fast Curing
- Color
- Black
- Size
- 4KG
- Curing Wavelength
- 405nm
View on Amazon: ANYCUBIC 4kg Standard 405nm UV Resin Affiliate link
ANYCUBIC standard resin bundle, four 1kg bottles of black (4kg): low shrink, quick curing with strong fluidity, stable in damp and corrosive conditions after curing, and a hardness-toughness balance that eases model removal. Shake each bottle well.
Pros
- Most resin in one order
- Four sealed 1kg bottles
- Known on Photon printers
Cons
- All black
- Needs a full shake
Good fit if
- You run a Photon print farm
- You print dark parts and terrain
Skip if
- You want colors
Verdict: Four kilos of ANYCUBIC black.
ANYCUBIC Tough Resin 2.0, 3D Printer Resin with Upgraded High Toughness and High Precision, 365-405nm Fast Curing 3D Resin for 4K 8K LCD/DLP/SLA 3D Printing (Grey+Grey, 2kg)
Best for: Best tough
- Printing Technology
- ✓ SLA
- Features
- High Precision, Fast Curing
- Color
- Grey
- Size
- 2KG
- Resin Type
- Tough
- Curing Wavelength
- 365-405nm
ANYCUBIC Tough Resin 2.0 in grey, 2kg (two bottles): higher flexural strength and elongation so thin parts and minis resist breaking, resists cracking from vibration, low odor with reduced VOCs, 365-405nm for 4K and 8K LCD, DLP and SLA printers.
Pros
- Survives drops per ANYCUBIC
- Thin parts hold up
- Wide wavelength range
Cons
- Costs more per kilo than standard
- No numeric strength figures
Good fit if
- You print clips, brackets or thin swords on minis
- You want fewer broken prints
Skip if
- You only print display busts
Verdict: Bulk tough resin for parts that flex.
SUNLU ABS-Like 3D Printer Resin 2000g
Best for: Best ABS-like value
- Printing Technology
- ✓ SLA
- Compatible Material
- ABS
- Features
- High Speed, High Precision, Low Shrinkage, Non-Brittle
- Resin Type
- ABS-Like
- Curing Wavelength
- 405nm
- Resolution
- 8K, 4K
View on Amazon: SUNLU ABS-Like 3D Printer Resin 2000g Affiliate link
SUNLU ABS-Like resin in dark grey, 2kg: less brittle with good abrasion resistance, fast-curing 405nm formula, light odor, stable in humid conditions after curing, leak-proof bottle with an air bag, for 2K-8K LCD, DLP and SLA printers.
Pros
- Lower cost per kilo than ELEGOO's 3kg
- Dark grey shows detail
- Leak-proof packing
Cons
- No numeric toughness data
- Single color
Good fit if
- You want tough resin without ELEGOO prices
- You print miniatures with fine detail
Skip if
- You need scratch resistance figures
Verdict: Value ABS-like resin in a 2kg bottle.
ELEGOO 8K Water-Washable 2.0 Resin 2000g
Best for: Best water-washable
- Printing Technology
- Resin
- Features
- Low Odor, Fast Curing
- Application
- Miniatures
- Resin Type
- Tough, Water Washable
- Resolution
- 8K
- Dimensions
- 8.27 × 3.9 × 5.51 inches
View on Amazon: ELEGOO 8K Water-Washable 2.0 Resin 2000g Affiliate link
ELEGOO 8K Water-Washable 2.0 in space grey, 2kg: rinses in water, tougher and less prone to warping than version 1.0, sharp detail for miniatures and architecture on 8K-class MSLA, DLP and LCD screens.
Pros
- No alcohol baths
- Tougher than WW 1.0
- 8K detail
Cons
- Rinse water still needs curing before disposal
- 2kg of WW must be used before it ages
Good fit if
- You hate buying IPA
- You print detailed minis on an 8K screen
Skip if
- You need ABS-like toughness
Verdict: Bulk water-wash resin for detail work.
Specifications side by side
| Spec | ELEGOO ABS-Like 3.0 Pro Grey Resin 3000g | ELEGOO Standard 2.0 Grey Resin 2000g | ELEGOO Standard Resin 3000g Multi-Color Pack | ANYCUBIC 4kg Standard 405nm UV Resin | ANYCUBIC Tough Resin 2.0, 3D Printer Resin with Upgraded High Toughness and High Precision, 365-405nm Fast Curing 3D Resin for 4K 8K LCD/DLP/SLA 3D Printing (Grey+Grey, 2kg) | SUNLU ABS-Like 3D Printer Resin 2000g | ELEGOO 8K Water-Washable 2.0 Resin 2000g |
|---|---|---|---|---|---|---|---|
| Printing Technology | Resin | Resin | Resin | Resin | SLA | SLA | Resin |
| Compatible Material | ABS | not stated | not stated | not stated | not stated | ABS | not stated |
| Features | High Precision, Non-Brittle | High Precision, Low Odor | not stated | High Precision, Fast Curing | High Precision, Fast Curing | High Speed, High Precision, Low Shrinkage, Non-Brittle | Low Odor, Fast Curing |
| Color | Grey | Grey 2.0 | Multicolored | Black | Grey | 2000g-dark Grey | Space Grey |
| Size | XL-3000g | L-2000g | XL-3000g | 4KG | 2KG | L-2000g | L-2000g |
| Application | not stated | not stated | not stated | not stated | not stated | not stated | Miniatures |
| Resin Type | ABS-Like | Standard | Standard | not stated | Tough | ABS-Like | Tough, Water Washable |
| Curing Wavelength | not stated | 405nm | 405nm | 405nm | 365-405nm | 405nm | not stated |
| Resolution | not stated | not stated | not stated | not stated | 8K, 4K | 8K, 4K | 8K |
| Dimensions | not stated | not stated | 3.82 × 3.82 × 8.66 inches | not stated | not stated | 3.94 × 3.94 × 3.94 inches | 8.27 × 3.9 × 5.51 inches |
| Weight | not stated | not stated | not stated | not stated | not stated | 4.41 pounds | 4.41 pounds |
| Model | liquid-3d-printing-materials | liquid-3d-printing-materials | liquid-3d-printing-materials | not stated | not stated | SUNLU ABS Like Resin | EL-3DL-RW2-0470 |
How to buy resin in bulk
-
One bottle or several
Choose ELEGOO's single 3kg bottle if you go through grey fast; choose the 3kg set or ANYCUBIC's four bottles if you print slowly and want sealed spares.
-
Tough versus standard
Standard resin suits display pieces; ABS-like and Tough 2.0 cost more but break less.
-
Store it right
Keep bulk resin cool, dark and capped, and shake or stir before each print.
-
Plan the cleanup
Water-washable resin saves IPA, but its rinse water must be cured in sunlight before it goes out.
Frequently asked questions
Can I use these resins in an MSLA printer?
Yes. Every listing names MSLA, LCD or DLP printers that cure at 405nm.
Which bulk resin here costs least per kilo?
ELEGOO Upgraded Standard 2.0 in the 2kg bottle at our check.
What comes in the ELEGOO 3kg standard set?
One kilo each of grey, black and translucent.
Does ANYCUBIC Tough Resin 2.0 work below 405nm?
ANYCUBIC lists 365-405nm curing.
See also
- best black 3d printer accessories
- best PEI build plates for 3d printers
- best spring steel build plates
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- best 3d printers with resume printing
- best 3D massage chairs






