ELEGOO ABS-Like 3.0 Pro Grey Resin Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO ABS-Like 3.0 Pro in grey is a 1000g bottle of 405nm resin for LCD, MSLA and DLP printers, aimed at miniatures and figures that get handled, plus test models and functional replacement parts. The Pro version adds two things over standard ABS-Like 3.0, according to ELEGOO: higher scratch resistance, so painted or bare surfaces resist scuffs from daily handling, and a heat deflection temperature about 10% higher, so parts soften less in warm spots. It keeps the line's toughness: parts bend before they break and take some tension and stress. Grey is the easiest color to inspect for detail and to prime. ELEGOO gives no absolute HDT, hardness or exposure times. The listing is the only source used here.
What stands out
- Higher scratch resistance than 3.0
- About 10% higher heat deflection
- Bends before breaking
Who it fits
Good fit for
Resin printer owners making gaming miniatures, figures and functional test parts that get handled, in a neutral grey that primes well.
Who should skip it
Anyone needing a stated heat or hardness figure, a flexible or castable resin, or exposure settings on the page.
Verdict: A tougher, scuff-resistant grey resin for handled models, with relative rather than absolute specs.
ABS-Like 3.0 Pro grey specs
Scratch resistant
Less scuffing from daily handling.
HDT about 10% above ABS-Like 3.0
Relative figure; no absolute value.
Tough, bends before breaking
Takes some tension and stress.
Low warp and shrinkage
Accurate dimensions after cure.
405nm, 1000g, grey
For LCD, MSLA and DLP printers.
No exposure times
Calibrate on your printer.
Formula and color
ELEGOO calls this a high-hardness, high-toughness blend with good flow and a smooth surface. The model code is EL-3D-AR002. Grey shows surface detail clearly and hides minor curing variance. Suggested uses run from miniatures and jewelry design to education, engineering test models and replacement parts.
Printing grey ABS-Like 3.0 Pro
Shake the bottle, then print an exposure test on your own screen, since ELEGOO gives no settings. Tough resins can need slightly longer exposure than standard resin. Wash in IPA, dry fully, then post-cure; scratch resistance depends on a full cure. Wear gloves and ventilate while handling liquid resin.
Before you buy
Checks for ELEGOO ABS-Like 3.0 Pro grey.
Check before you buy
- Your printer uses 405nm light
- Models will be handled or played with
- Grey suits priming and painting
- You will run an exposure test
The product at a glance
ELEGOO ABS-Like 3.0 Pro Resin 1000g
Best for: Durable miniatures and test parts
- Printing Technology
- Resin
- Compatible Material
- ABS
- Features
- High Precision, Fast Curing, Non-Brittle
- Color
- Grey
- Resin Type
- ABS-Like
- Curing Wavelength
- 405nm
View on Amazon: ELEGOO ABS-Like 3.0 Pro Resin 1000g Affiliate link
ELEGOO ABS-Like 3.0 Pro grey 1000g: 405nm, higher scratch resistance, about 10% higher HDT than ABS-Like 3.0, tough and bendable, low shrinkage; no absolute figures or exposure times.
Pros
- Scuff-resistant surface
- Better heat tolerance than 3.0
- Tough, non-brittle
Cons
- Only relative heat figure
- No exposure settings
Good fit if
- You print handled minis
- You want tough resin
Skip if
- You need flexible resin
Verdict: A tougher grey resin for handled models.
Specifications side by side
| Spec | ELEGOO ABS-Like 3.0 Pro Resin 1000g |
|---|---|
| Printing Technology | Resin |
| Compatible Material | ABS |
| Features | High Precision, Fast Curing, Non-Brittle |
| Color | Grey |
| Resin Type | ABS-Like |
| Curing Wavelength | 405nm |
| Dimensions | 3.82 × 3.82 × 8.66 inches |
| Size | M-1000g |
| Model | EL-3D-AR002 |
Frequently asked questions
What does the Pro version add over ABS-Like 3.0?
Higher scratch resistance and roughly 10% higher heat deflection temperature, per ELEGOO.
Is ABS-Like 3.0 Pro brittle?
ELEGOO calls it non-brittle: it bends rather than breaks under some stress.
What is the exact heat deflection temperature?
The listing gives only the 10% relative figure.
Which printers does it fit?
405nm LCD, MSLA and DLP resin printers.
3.0 Pro or 8K Standard resin?
Choose 3.0 Pro for tough, handled models; choose 8K Standard for display pieces on high-resolution screens.
Featured in
See also
- elegoo abs like 3 0 clear red resin 2kg review
- elegoo neptune 3 pro plus max extruder review
- elegoo water washable resin 2 0 blue 1kg review
- elegoo pla filament review
- elegoo pla plus filament review
- ELEGOO Matte PLA Filament 1.75mm Review: Who It Fits and Who Should Skip It
- ELEGOO Rapid PETG Filament 1.75mm Review (2026): A Spec-Based Look
- ELEGOO 1.75mm Black PETG Filament Review: Who It Fits and Who Should Skip It
- elegoo saturn 3 12k resin 3d printer review
- eero like new amazon eero pro review
