QIDI PA12-CF Carbon Fiber Nylon Filament Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
QIDI's PA12-CF is an engineering filament: 85% PA12 nylon with 15% carbon fiber, sold as a 1kg spool of 1.75mm in black. Its selling point over the more common PA6 nylons is moisture, since QIDI says its saturated water uptake is one tenth of ordinary PA6, and the foil pack is tight enough that QIDI says you can print straight from the bag. The settings given are 280°C nozzle, 80°C bed and 60mm/s, and QIDI points to its X-CF printer, built for carbon fiber. The figures here are QIDI's; this is a listing review, not a lab test.
What stands out
- 15% carbon fiber in PA12
- Moisture uptake a tenth of PA6, per QIDI
- Usable without drying out of the foil pack
- Low warp and shrinkage claimed
Who it fits
Good fit for
Makers printing stiff, wear-resistant parts such as gears, drone arms or fixtures on a hotend that holds 280°C and a nozzle that can take abrasive fiber.
Who should skip it
Skip it for decorative work or on a stock brass nozzle: carbon fiber wears soft nozzles, and the page names no tensile or heat deflection figures to justify the price over PA6-CF.
Verdict: An easier-to-store carbon nylon for serious functional parts.
PA12-CF numbers decoded
85% PA12 + 15% carbon fiber
Fiber adds stiffness and dimensional stability; PA12 is the less thirsty nylon.
1/10 the moisture uptake of PA6
Less drying and steadier properties in humid rooms, by QIDI's comparison.
280°C nozzle, 80°C bed, 60mm/s
A hot nozzle and a slow speed, typical of fiber nylon.
Vapor transmission 0.014%
QIDI's figure for the foil bag, the reason it says no drying is needed on opening.
Material and packaging
QIDI lists strength, rigidity, toughness and resistance to impact, wear, chemicals and temperature, plus good layer adhesion and a fine surface finish. No tensile or heat numbers are given. The spool is carefully wound and shipped in a vacuum aluminum foil bag.
Printing it
QIDI's own answer for carbon fiber is the X-CF printer with its slicer profile. On another machine, use a hardened nozzle, 280°C, an 80°C bed and about 60mm/s, and keep the spool sealed between jobs even though PA12 absorbs less water than PA6.
Before buying QIDI PA12-CF
Make sure your setup fits.
Check before you buy
- Your hotend holds 280°C
- You have a hardened steel nozzle for the fiber
- Your parts need stiffness and wear resistance
- Paying near the top of the site's 1kg prices is acceptable
The product at a glance
QIDI Technology 1.75mm PA12-CF Nylon Filament
Best for: Engineering parts
- Material Type
- PA12-CF
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Compatible Material
- Nylon
- Features
- Carbon Fiber
- Color
- Black
View on Amazon: QIDI Technology 1.75mm PA12-CF Nylon Filament Affiliate link
QIDI PA12-CF black 1kg: 85% PA12 with 15% carbon fiber, a tenth of PA6's moisture uptake, foil packed for use without drying, 280°C nozzle, 80°C bed, 60mm/s.
Pros
- Low moisture sensitivity
- Stated fiber content
- Simple settings
Cons
- Costly per kg
- Needs 280°C and a hardened nozzle
- No tensile or heat figures
Good fit if
- You print stiff black gears or fixtures in a humid workshop
Skip if
- You only print display models
Verdict: A carbon nylon that is easier to keep dry.
Specifications side by side
| Spec | QIDI Technology 1.75mm PA12-CF Nylon Filament |
|---|---|
| Material Type | PA12-CF |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Compatible Material | Nylon |
| Features | Carbon Fiber |
| Color | Black |
| Dimensions | 8.27 × 8.66 × 1.97 inches |
| Size | EasePA12-CF |
| Model | CFUSQD21 |
Frequently asked questions
How much carbon fiber is in QIDI PA12-CF?
15%, blended with 85% PA12 nylon.
Does QIDI PA12-CF need drying?
QIDI says you can print it straight out of the vacuum foil bag without drying.
What settings does QIDI give for its PA12-CF?
280°C nozzle, 80°C bed and 60mm/s.
Why choose PA12-CF over PA6-CF?
QIDI says PA12-CF absorbs only a tenth of the moisture of ordinary PA6, so it is less sensitive to humidity.
Which QIDI printer suits this carbon nylon?
QIDI points to its X-CF, a printer designed for carbon fiber filament.
Featured in
See also
- bambu lab petg hf green filament review
- bambu lab abs white filament refill review
- creality cr 10 se ceramic hotend kit review
- r qidi technology pla rapido filament 1 75mm review
- r qidi technology abs rapido filament review
- QIDI ASA Filament Review: Who It Fits and Who Should Skip It
- QIDI PETG-Tough Green Filament Review (2026): A Spec-Based Look
- QIDI PETG-Tough Filament (Red, 1.75mm, 1kg) Review
- r qidi technology qidi q2 combo 3d printer review
- wonitago carbon fiber kayak review
