QIDI PETG-Tough Filament (Red, 1.75mm, 1kg) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
QIDI's PETG-Tough in red is a 1kg, 1.75mm spool of impact-modified PETG, and the headline figure is notch impact strength more than three times that of ordinary PETG. That makes it a fit for parts that get knocked or dropped: tool handles, clips, guards, drone arms, and red covers or knobs that should be easy to see on a machine. QIDI also tuned it to flow easily, rating it for 40-400mm/s and recommending it for its own X-Max3 printer, though any 1.75mm printer can run it. The full settings are on the listing: 240-280°C at the nozzle, a 70-80°C bed and the part fan at 100%. Tolerance is ±0.02mm, and the spool comes vacuum sealed in an aluminum foil bag. QIDI asks users to tuck the loose end through the spool's fixing hole to avoid tangles. Everything here comes from QIDI's listing; we have not printed the spool.
What stands out
- Impact-modified PETG, 1kg red
- 3x+ notch impact vs ordinary PETG
- 240-280°C, 70-80°C bed, fan 100%
- 40-400mm/s
- ±0.02mm
Who it fits
Good fit for
Owners of fast printers making red handles, guards, knobs and clips that take knocks.
Who should skip it
Anyone with a hotend limited to about 240°C, or makers who need clear or translucent PETG.
Verdict: A tough, fast-flowing PETG in a high-visibility red, with a complete print profile.
QIDI PETG-Tough Red specs
3x+ notch impact
Versus ordinary PETG, per QIDI.
40-400mm/s
Low extrusion pressure suits fast printers.
240-280°C / 70-80°C bed
QIDI's printing window.
Fan 100%
QIDI's cooling advice for this PETG.
±0.02mm, foil vacuum pack
Steady feeding, dry on arrival.
Where red PETG-Tough earns its place
Plain PETG already flexes before breaking; QIDI's toughened grade adds impact strength for parts that are dropped, clamped or struck. Red is the color for things that should catch the eye: emergency stop covers, handles on jigs, guards and warning tabs. QIDI also calls it odorless and heat resistant, without a heat figure.
Printing QIDI PETG-Tough Red
Start in the lower part of QIDI's 240-280°C range and raise it if layers split, with a 70-80°C bed and full fan as QIDI suggests. Increase speed toward 400mm/s only if your hotend melts fast enough. Use glue stick or a textured plate on PEI, since PETG grips smooth surfaces hard.
Before buying QIDI PETG-Tough Red
Checks.
Check before you buy
- Your hotend reaches 280°C for QIDI PETG-Tough
- Your red PETG-Tough parts face knocks or drops
- You run a fast printer that can use 400mm/s
- You use a release layer for red PETG on PEI
The product at a glance
R QIDI Technology PETG-Tough Red 1.75mm
Best for: Impact-prone red parts
- Material Type
- PETG-Tough
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 400mm/s
- Dimensional Accuracy
- +/- 0.02mm
- Color
- Red
View on Amazon: R QIDI Technology PETG-Tough Red 1.75mm Affiliate link
QIDI PETG-Tough red 1kg: 3x+ notch impact vs ordinary PETG, 240-280°C, 70-80°C bed, fan 100%, 40-400mm/s, ±0.02mm.
Pros
- Toughened for impact
- Rated up to 400mm/s
- Full settings on the listing
Cons
- Needs up to 280°C
- No heat resistance figure
- Sticks hard to smooth PEI
Good fit if
- You print red PETG-Tough guards or handles
Skip if
- Your hotend stops short of 280°C
Verdict: A toughened, fast PETG in eye-catching red.
Specifications side by side
| Spec | R QIDI Technology PETG-Tough Red 1.75mm |
|---|---|
| Material Type | PETG-Tough |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Max Print Speed | 400mm/s |
| Dimensional Accuracy | +/- 0.02mm |
| Compatible Material | PETG |
| Color | Red |
| Size | 1.75Mm |
| Surface Finish | Smooth |
| Resin Type | Tough |
Frequently asked questions
How tough is QIDI PETG-Tough?
Over three times the notch impact of standard PETG, by QIDI's figure.
What settings does QIDI give for red PETG-Tough?
240-280°C nozzle, 70-80°C bed, fan 100%, 40-400mm/s for parts that take knocks.
Does QIDI PETG-Tough work in non-QIDI printers?
Yes, QIDI lists it for most 1.75mm FDM printers and recommends it with the X-Max3.
What tolerance does the red PETG-Tough spool have?
±0.02mm.
How is QIDI PETG-Tough Red packed?
Vacuum sealed in an aluminum foil bag against moisture.
See also
- bambu lab pla filament jade white review
- jayo chestnut brown wood pla filament review
- semdon red blue green tri color silk pla review
- r qidi technology pla rapido filament 1 75mm review
- r qidi technology abs rapido filament review
- QIDI ASA Filament Review: Who It Fits and Who Should Skip It
- QIDI PETG-Tough Green Filament Review (2026): A Spec-Based Look
- QIDI PA12-CF Carbon Fiber Nylon Filament Review: Specs, Pros and Cons
- r qidi technology qidi q2 combo 3d printer review
- atrix ahsc 1 atrix lil red review
