Best QIDI 3D Printing Filaments: 10 Picks Ranked by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
QIDI builds enclosed, high-temperature printers like the Plus4, and its filament range leans the same way: half of these ten spools are fiber-filled engineering materials. Our top QIDI pick for most buyers is PLA Rapido in black, listed at 220°C, a 30-60°C bed and 200-400mm/s with ±0.02mm, an easy fast PLA that works on almost any printer. The blue PLA Rapido from the old list is out of stock, so the in-stock black version of the same filament replaces it. Then come Matte PLA Rapido, PETG-Tough, ABS Rapido and ASA, and the composites: ABS-GF25, PET-CF, PA12-CF, PAHT-CF and PPS-CF, which needs a 310-350°C nozzle. Many QIDI spools show low stock, so check availability before planning a long job.
Our top pick: QIDI PLA Rapido 1.75mm Black 1kg.
Quick picks
Our 10 picks
QIDI PLA Rapido 1.75mm Black 1kg
Best for: Fast everyday PLA
- Material Type
- PLA Rapido
- Filament Diameter
- 1.75mm
- Net Weight
- 1 KG
- Max Print Speed
- 400mm/s
- Dimensional Accuracy
- +/- 0.02mm
- Features
- High Speed
View on Amazon: QIDI PLA Rapido 1.75mm Black 1kg Affiliate link
QIDI PLA Rapido black 1kg: fast PLA at 200-400mm/s, 220°C nozzle, 30-60°C bed, ±0.02mm, dried and vacuum sealed; replaces the out-of-stock blue.
Pros
- Settings listed
- Fast
- Works on most printers
Cons
- Costs more than budget PLA
- No toughness data
Good fit if
- You print everyday models on a QIDI Q1 or Plus4
Skip if
- You want the cheapest PLA available
Verdict: QIDI's easiest spool.
R QIDI TECHNOLOGY Matte PLA Rapido Filament 1.75mm, 1kg Spool, Malt Clay | high-speed printing, beginner-friendly, matte finish, tangle-free, low warpage, plant-based, for FDM 3D printers
Best for: Matte finish
- Printing Technology
- FDM
- Compatible Material
- PLA
- Features
- High Speed
- Target Audience
- Beginners
- Finish
- Matte
- Resin Type
- Plant-Based
QIDI Matte PLA Rapido Malt Clay 1kg: non-glossy finish that hides layer lines, high-speed PLA base, ±0.02mm; stock is low.
Pros
- Hides layers
- High-speed capable
- Earthy color
Cons
- No settings on this page
- Low stock
Good fit if
- You print terrain or architectural models
Skip if
- You want shine
Verdict: QIDI's matte option.
QIDI Tech PETG-Tough 1.75mm Filament
Best for: Tough parts
- Material Type
- PETG
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 400mm/s
- Dimensional Accuracy
- +/- 0.02mm
- Color
- Green
View on Amazon: QIDI Tech PETG-Tough 1.75mm Filament Affiliate link
QIDI PETG-Tough green 1kg: over 3× the notched impact strength of ordinary PETG, 240-280°C, 70-80°C bed, 40-400mm/s, foil-sealed.
Pros
- Toughness figure
- Full settings
- Weather resistant
Cons
- Low stock
- 100% fan may weaken layers on big parts
Good fit if
- You print snap fits or outdoor clips
Skip if
- You want QIDI matte PLA's soft finish
Verdict: Tough PETG with real data.
QIDI ABS Rapido 1.75mm White Filament
Best for: Fast ABS
- Material Type
- ABS Rapido
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 400mm/s
- Dimensional Accuracy
- +/- 0.03mm
- Color
- White
View on Amazon: QIDI ABS Rapido 1.75mm White Filament Affiliate link
QIDI ABS Rapido white 1kg: low-VOC ABS up to 400mm/s, 270°C nozzle, 80-100°C bed, ±0.03mm, more impact resistant than PLA.
Pros
- Less odor
- Fast for ABS
- Settings listed
Cons
- ±0.03mm
- Enclosure needed
Good fit if
- You print fast ABS parts in an enclosed QIDI
Skip if
- Your printer is open-frame
Verdict: QIDI's speed ABS.
R QIDI Technology 1.75mm ASA Filament
Best for: Outdoor parts
- Material Type
- ASA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- ±0.02mm
- Color
- Blue
- Weight
- 2.2 pounds
View on Amazon: R QIDI Technology 1.75mm ASA Filament Affiliate link
QIDI ASA blue 1kg: UV and weather resistant, 47.1 MPa tensile, 180 J/m notched impact, 90°C heat deformation at 1.8 MPa, acetone smoothable.
Pros
- Mechanical data
- UV resistant
- Post-processing friendly
Cons
- No print temperatures
- Low stock
Good fit if
- You print outdoor fixtures that should keep their color
Skip if
- You print indoor toys
Verdict: QIDI's weatherproof spool.
R QIDI Technology ABS-GF25 1kg Black
Best for: Rigid ABS parts
- Material Type
- Glass Fiber ABS
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Max Print Speed
- 200mm/s
- Surface Finish
- Frosted
- Features
- Low Shrinkage
View on Amazon: R QIDI Technology ABS-GF25 1kg Black Affiliate link
QIDI ABS-GF25 black 1kg: 25% glass fiber core with a pure ABS outer layer for bonding, 250-270°C, 100-110°C bed, fan off, steel nozzle advised.
Pros
- Stiff and low shrink
- Better layer bonding design
- Frosted finish
Cons
- Very hot bed
- Abrasive
Good fit if
- You print rigid housings or jigs
Skip if
- Your heated bed cannot pass 100°C for GF25
Verdict: Glass-filled ABS for stiffness.
R QIDI TECHNOLOGY Carbon Fiber PET Filament 1.75 1KG Spool for 3D Printer | ultra-low warpage, chemical & impact resistant, high dimensional stability, compatible with multi, advanced material printing
Best for: Stiff parts
- Features
- Carbon Fiber
- Color
- Black
QIDI PET-CF black 1kg: 15% carbon fiber PET, ultra-low warp, no heated chamber needed, 280-320°C, 70-80°C bed, fan off, 40-200mm/s.
Pros
- Low warp
- Chemical resistant
- No chamber needed
Cons
- High nozzle temperature
- Low stock
Good fit if
- You print stiff parts on an open printer with a hot hotend
Skip if
- Your hotend stops at 260°C
Verdict: Carbon PET without a chamber.
QIDI Technology 1.75mm PA12-CF Nylon Filament
Best for: Nylon parts
- Material Type
- PA12-CF
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Compatible Material
- Nylon
- Features
- Carbon Fiber
- Color
- Black
View on Amazon: QIDI Technology 1.75mm PA12-CF Nylon Filament Affiliate link
QIDI PA12-CF black 1kg: 85% PA12 with 15% carbon fiber, moisture uptake one tenth of PA6, foil packaging, tuned for QIDI's X-CF printer.
Pros
- Low moisture sensitivity
- Strong and stiff
- Stable dimensions
Cons
- Near the top of QIDI pricing
- Temperatures cut off in the listing
Good fit if
- You print nylon parts and hate drying filament
Skip if
- You are new to engineering materials
Verdict: The easy-care nylon.
R QIDI TECHNOLOGY PAHT-CF Carbon Fiber Nylon Filament 1.75mm,1Kg Spool | lower moisture absorption, high rigidity & heat resistance, strong layer adhesion, unlock multi & advanced material printing
Best for: High-heat nylon
- Compatible Material
- Nylon
- Features
- Carbon Fiber
- Color
- Black
QIDI PAHT-CF black 1kg: high-temp nylon with 15% carbon fiber, 300-320°C, 70-80°C bed, 60-160mm/s, anneal at 80-100°C for 4-8 hours.
Pros
- Heat and wear resistant
- Full settings plus annealing
- Low moisture uptake
Cons
- Hardened nozzle required
- Demanding setup
Good fit if
- You print parts near engines or motors
Skip if
- You have a stock hotend
Verdict: QIDI's workhorse composite.
R QIDI PPS-CF 1.75mm Filament
Best for: Extreme heat
- Material Type
- PPS-CF
- Filament Diameter
- 1.75mm
- Net Weight
- 0.75kg
- Features
- Carbon Fiber
- Color
- Black
- Dimensions
- 8.27 × 8.66 × 1.97 inches
View on Amazon: R QIDI PPS-CF 1.75mm Filament Affiliate link
QIDI PPS-CF black 0.75kg: carbon fiber PPS, HDT up to 264°C, flame retardant, 7160 MPa bending modulus, 310-350°C nozzle, aimed at the Plus4.
Pros
- Highest heat rating here
- Flame retardant
- Chemical resistant
Cons
- 0.75kg spool
- Needs a 350°C-class hotend
Good fit if
- You print aerospace or electronics fixtures on a QIDI Plus4
Skip if
- Your printer cannot reach 310°C
Verdict: Industrial filament for QIDI's hot printers.
Specifications side by side
| Spec | QIDI PLA Rapido 1.75mm Black 1kg | R QIDI TECHNOLOGY Matte PLA Rapido Filament 1.75mm, 1kg Spool, Malt Clay | high-speed printing, beginner-friendly, matte finish, tangle-free, low warpage, plant-based, for FDM 3D printers | QIDI Tech PETG-Tough 1.75mm Filament | QIDI ABS Rapido 1.75mm White Filament | R QIDI Technology 1.75mm ASA Filament | R QIDI Technology ABS-GF25 1kg Black | R QIDI TECHNOLOGY Carbon Fiber PET Filament 1.75 1KG Spool for 3D Printer | ultra-low warpage, chemical & impact resistant, high dimensional stability, compatible with multi, advanced material printing | QIDI Technology 1.75mm PA12-CF Nylon Filament | R QIDI TECHNOLOGY PAHT-CF Carbon Fiber Nylon Filament 1.75mm,1Kg Spool | lower moisture absorption, high rigidity & heat resistance, strong layer adhesion, unlock multi & advanced material printing | R QIDI PPS-CF 1.75mm Filament |
|---|---|---|---|---|---|---|---|---|---|---|
| Material Type | PLA Rapido | not stated | PETG | ABS Rapido | ASA | Glass Fiber ABS | not stated | PA12-CF | not stated | PPS-CF |
| Filament Diameter | 1.75mm | not stated | 1.75mm | 1.75mm | 1.75mm | 1.75mm | not stated | 1.75mm | not stated | 1.75mm |
| Net Weight | 1 KG | not stated | 1kg | 1kg | 1kg | 1KG | not stated | 1kg | not stated | 0.75kg |
| Max Print Speed | 400mm/s | not stated | 400mm/s | 400mm/s | not stated | 200mm/s | not stated | not stated | not stated | not stated |
| Dimensional Accuracy | +/- 0.02mm | not stated | +/- 0.02mm | +/- 0.03mm | ±0.02mm | not stated | not stated | not stated | not stated | not stated |
| Surface Finish | not stated | not stated | not stated | not stated | not stated | Frosted | not stated | not stated | not stated | not stated |
| Printing Technology | not stated | FDM | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Compatible Material | PLA | PLA | PETG | ABS | ASA | ABS | not stated | Nylon | Nylon | not stated |
| Features | High Speed | High Speed | not stated | not stated | not stated | Low Shrinkage | Carbon Fiber | Carbon Fiber | Carbon Fiber | Carbon Fiber |
| Target Audience | Beginners | Beginners | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Color | Black | Malt Clay | Green | White | Blue | Black | Black | Black | Black | Black |
| Size | not stated | not stated | 1.75Mm | not stated | 1.75Mm | ABS-GF25 1KG | PET-CF 1KG | EasePA12-CF | PAHT-CF | 1.75Mm |
| Finish | not stated | Matte | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Resin Type | not stated | Plant-Based | Tough | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Weight | 2.2 pounds | not stated | not stated | 2.2 pounds | 2.2 pounds | not stated | not stated | not stated | not stated | not stated |
| Dimensions | not stated | not stated | not stated | not stated | not stated | not stated | not stated | 8.27 × 8.66 × 1.97 inches | not stated | 8.27 × 8.66 × 1.97 inches |
| Model | not stated | not stated | not stated | not stated | not stated | not stated | not stated | CFUSQD21 | not stated | US-FILA-PPS-CF |
QIDI's filament families
The Rapido line is built for speed: PLA Rapido and Matte PLA Rapido at 200-400mm/s, and ABS Rapido at 270°C with a low-VOC treatment for less odor. PETG-Tough claims more than three times the notched impact strength of ordinary PETG, and ASA adds UV resistance with a 90°C heat deformation figure.
The composites step up in heat and difficulty: ABS-GF25 with 25% glass fiber, PET-CF with 15% carbon fiber, PA12-CF and PAHT-CF nylons with low moisture uptake, and PPS-CF with a 264°C heat deflection temperature and flame retardancy.
QIDI against other filament brands
QIDI's engineering spools are closer to Polymaker's Fiberon line than to budget brands: they come in vacuum aluminum foil bags, list nozzle, bed, fan and speed settings, and give fiber percentages. Few consumer brands sell PPS-CF at all.
The everyday spools cost more than SUNLU, ELEGOO or OVERTURE, and the Rapido PLA and ABS pages lean on speed claims rather than strength data. ABS Rapido is the one QIDI spool here at ±0.03mm instead of ±0.02mm.
Choosing QIDI filament
-
Match the hotend to the material
PLA Rapido runs at 220°C and PETG-Tough at 240-280°C; PET-CF at 280-320°C, PAHT-CF at 300-320°C and PPS-CF at 310-350°C need a high-temperature hotend such as the QIDI Plus4's.
-
Fibers need steel
QIDI recommends hardened steel or better nozzles for PAHT-CF and a steel nozzle for ABS-GF25; PET-CF and PA12-CF are abrasive too.
-
Keep the fan off for engineering spools
ABS-GF25, PET-CF and PAHT-CF all list 0% fan; PETG-Tough is the exception at 100%.
-
Anneal nylon for heat
QIDI suggests annealing PAHT-CF at 80-100°C for 4 to 8 hours to reach its best heat performance.
Frequently asked questions
What settings does QIDI PLA Rapido use?
220°C nozzle, 30-60°C bed and 200-400mm/s, according to the listing.
Is QIDI PETG-Tough tougher than normal PETG?
QIDI says its notched impact strength is more than three times that of ordinary PETG.
Which QIDI filament handles the most heat?
PPS-CF, with a heat deflection temperature up to 264°C and continuous use above 200°C; it needs a 310-350°C nozzle.
Does QIDI PA12-CF absorb moisture like other nylons?
QIDI says its saturated moisture absorption is one tenth of ordinary PA6, though drying before printing is still wise.
Can QIDI ASA be smoothed with acetone?
Yes, the listing says it supports sanding, painting and acetone vapor smoothing.
See also
- best YOOPAI 3d printing filaments
- best AMOLEN 3d printing filaments
- best IEMAI 3d printing filaments
- r qidi technology pla rapido filament 1 75mm review
- r qidi technology abs rapido filament review
- QIDI ASA Filament Review: Who It Fits and Who Should Skip It
- QIDI PETG-Tough Green Filament Review (2026): A Spec-Based Look
- QIDI PA12-CF Carbon Fiber Nylon Filament Review: Specs, Pros and Cons
- best R QIDI Technology 3d printers
- we technology smart door lock 3d review









