Bambu Lab PETG HF Green Filament Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Bambu Lab's PETG HF is the high flow PETG made to run at its printers' fast default profiles, here in Green (33500) on a 1kg spool for the AMS. The odd thing is the listing itself: apart from the title, the bullets describe ordinary PETG (stronger and more flexible than PLA, glossy, low warp, moisture and chemical resistant) and never explain what high flow changes or give a nozzle temperature, bed temperature or speed. What it does state is a 1.75mm diameter at ±0.03mm and vacuum sealing with desiccant. The green spool showed low stock when we looked. This is a reading of Bambu Lab's page; we did not print the spool.
What stands out
- High flow PETG matched to Bambu printers
- Spooled 1kg that drops into an AMS
- Glossy finish, impact resistance over PLA
- Vacuum sealed with desiccant
Who it fits
Good fit for
Bambu Lab owners who want a PETG that loads with the built-in PETG HF profile and handles brackets, enclosures and outdoor parts.
Who should skip it
Pass on it if you run another brand of printer and want settings from the seller: none are on this page. The ±0.03mm tolerance is also looser than many third-party PETGs.
Verdict: The easy PETG choice inside a Bambu setup, with a thin listing.
Green PETG HF details in plain words
High flow (HF)
Bambu Lab's name for PETG that melts fast enough for its high speed profiles; the page does not quantify it.
1.75mm ±0.03mm
Standard diameter; the tolerance is looser than the ±0.02mm many rivals claim.
1kg on a spool
Ready for the AMS, unlike Bambu's refill packs that need a reusable spool.
Color code 33500
Bambu Lab's code for this Green, useful when matching reorders.
What the listing promises
Strength, flexibility and impact resistance above PLA, a clean glossy surface with saturated color, and better resistance to heat, moisture, chemicals and deformation, which suits outdoor parts. Spec weight is 3 lb, more than the 1kg of filament because it includes the spool and packing.
Using it
On a Bambu printer, select the Bambu PETG HF profile and print. On other FDM printers, the page only says it works with most of them, so start from a generic PETG profile. Keep it sealed when idle: PETG absorbs moisture slowly, but damp PETG strings.
Before ordering the green PETG HF
Points the page does not cover.
Check before you buy
- You will use Bambu's own PETG HF profile
- No temperature or speed is listed for other printers
- ±0.03mm tolerance is fine for you
- Low stock may slow delivery
The product at a glance
Bambu Lab PETG HF 1.75mm Filament (1kg)
Best for: Bambu AMS users
- Material Type
- PETG
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- 0.03mm
- Surface Finish
- Glossy
- Printing Technology
- FDM
View on Amazon: Bambu Lab PETG HF 1.75mm Filament (1kg) Affiliate link
Bambu Lab PETG HF Green (33500) 1kg spool: high flow PETG for AMS and fast profiles, 1.75mm ±0.03mm, vacuum sealed; no print temperatures listed, low stock.
Pros
- Works with Bambu's PETG HF profile
- AMS-ready spool
- Glossy and tough
Cons
- No settings on the page
- ±0.03mm tolerance
- Low stock
Good fit if
- You print green functional parts on a Bambu Lab printer with AMS
Skip if
- You want seller-listed settings for a non-Bambu printer
Verdict: A plug-and-print PETG for Bambu owners.
Specifications side by side
| Spec | Bambu Lab PETG HF 1.75mm Filament (1kg) |
|---|---|
| Material Type | PETG |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | 0.03mm |
| Surface Finish | Glossy |
| Printing Technology | FDM |
| Compatible Material | PETG |
| Size | 1.75Mm |
| Dimensions | 8.58 × 8.15 × 2.83 inches |
| Weight | 3 pounds |
| Color | Green (33500) |
| Model | 3917-G02-G0-175-1000-SPL |
If you are also outfitting a home office or garage with something unrelated to printing, our hipoem golf putting green review covers that product's published specs in the same format.
Frequently asked questions
What makes Bambu Lab PETG HF different from regular PETG?
HF stands for high flow, meant for fast printing; this listing does not explain the difference further.
What temperature does Bambu Lab PETG HF green print at?
The page lists none; Bambu printers carry a PETG HF profile with the settings.
Does green PETG HF come on a spool?
Yes, this listing is a 1kg spool ready for the AMS.
What tolerance does Bambu Lab give for PETG HF?
1.75mm with a 0.03mm tolerance.
Is Bambu Lab PETG HF good for outdoor parts?
Bambu Lab says it resists moisture, chemicals and deformation better than PLA, which suits outdoor use.
