Bambu Lab ABS White Filament Refill Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This Bambu Lab ABS comes as a 1kg refill in White (40100): the filament ships without a spool, so you need a Bambu reusable spool before it can go into an AMS. Bambu pitches it as engineering ABS with strength, rigidity and heat resistance for mechanical parts, tools and enclosures, and says it sands, drills, paints and smooths with acetone. Diameter is 1.75mm at ±0.03mm. Like other Bambu pages it gives no nozzle or bed temperature, and it notes that the low-warp claim applies when printed in an enclosed or heated chamber. Only a few refills were left when we checked. Our summary uses Bambu Lab's listing only.
What stands out
- Heat resistant engineering ABS
- Acetone smoothing, sanding, drilling and painting
- Refill format, cheaper than a spooled roll
- Low warp in an enclosed chamber
Who it fits
Good fit for
Owners of enclosed Bambu printers (P1S, X1 series) who already have reusable spools and need white parts that survive heat, such as printer parts, fixtures or electronics cases.
Who should skip it
Skip it on an open printer such as the A1: ABS needs a closed, warm chamber. If you have no reusable spool, buy the spooled version instead.
Verdict: A sensible white ABS refill for enclosed Bambu machines.
White ABS refill specs explained
Refill, 1kg
Filament without a spool; it must be wound onto or clipped into a reusable spool for the AMS.
1.75mm ±0.03mm
Standard size with a moderate tolerance.
Engineering-grade ABS
Rigid and heat resistant, for parts that sit near motors or in warm places.
Color code 40100
Bambu Lab's White ABS code for matching reorders.
Material and finish
Bambu describes a clean finish that takes post-processing well: it can be sanded, drilled, painted or acetone smoothed. The formula aims at better layer adhesion and lower shrinkage than generic ABS, provided the chamber is enclosed or heated. The refill is vacuum sealed with desiccant.
Printing it
Use Bambu's ABS profile on an enclosed printer and keep the door shut until the part cools, which limits warping and cracking. ABS gives off fumes, so ventilate the room or use a filtered enclosure. The page lists no temperatures for non-Bambu printers, only that it suits most high-temp FDM machines.
Before buying the white ABS refill
A short check.
Check before you buy
- You own a Bambu reusable spool
- Your printer is enclosed
- The room is ventilated for ABS fumes
- Low stock at our check may delay delivery
The product at a glance
Bambu Lab 1.75mm ABS Filament Refill
Best for: Heat-resistant parts
- Material Type
- ABS
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- ±0.03mm
- Printing Technology
- FDM
- Dimensions
- 8.27 × 8.66 × 2.95 inches
View on Amazon: Bambu Lab 1.75mm ABS Filament Refill Affiliate link
Bambu Lab ABS White (40100) 1kg refill: rigid, heat resistant engineering ABS, acetone smoothable, 1.75mm ±0.03mm; needs a reusable spool and an enclosure, low stock.
Pros
- Heat resistant
- Post-processes well
- Refill saves packaging
Cons
- No spool included
- Needs an enclosed printer
- No temperatures listed
Good fit if
- You print white heat-resistant parts on a P1S or X1 with a reusable spool
Skip if
- You print on an open-frame printer
Verdict: Good white ABS for enclosed Bambu printers.
Specifications side by side
| Spec | Bambu Lab 1.75mm ABS Filament Refill |
|---|---|
| Material Type | ABS |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | ±0.03mm |
| Printing Technology | FDM |
| Compatible Material | ABS |
| Size | 1.75Mm |
| Dimensions | 8.27 × 8.66 × 2.95 inches |
| Weight | 2.2 pounds |
| Color | Abs White (40100) |
| Model | 47949-R |
If you are also planning storage for your workshop or spools, our gyfimoie white wardrobe review covers that unit's published dimensions and specs in the same way.
Frequently asked questions
Does the Bambu Lab ABS white refill come with a spool?
No, it is a refill; you need a reusable spool to mount it.
Will acetone vapor smooth the white Bambu refill?
Yes, Bambu lists acetone smoothing along with sanding, drilling and painting.
Can I print Bambu ABS on an A1?
Bambu says low warp needs an enclosed or heated chamber; an open printer like the A1 is a poor fit.
What diameter tolerance does Bambu give for this ABS?
1.75mm with ±0.03mm.
What settings should Bambu Lab white ABS use?
The page gives none; use the Bambu ABS profile on Bambu printers.
