QIDI ASA Filament Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This is a spool of filament, not a printer, whatever the old title said: QIDI's ASA in blue, 1kg of 1.75mm at ±0.02mm. ASA is the outdoor cousin of ABS, and QIDI backs the claim with numbers few filament pages give: 47.1 MPa tensile strength, 180 J/m notched impact and a 90°C heat deformation temperature at 1.8 MPa. Settings are 230-250°C at the nozzle and a hot 90-110°C bed, with an enclosed chamber advised. It sands, paints and smooths with acetone vapor. Stock was low when we checked. These notes summarize QIDI's listing; no prints were made for this review.
What stands out
- UV and weather resistance aimed at outdoor parts
- Tensile, impact and heat figures published
- ±0.02mm diameter tolerance
- Acetone vapor smoothing, sanding and painting
Who it fits
Good fit for
Owners of enclosed printers, QIDI or otherwise, who print brackets, garden fittings, car trim or housings that will sit in sun and rain.
Who should skip it
Look elsewhere if your printer is open-frame or its bed cannot reach 90°C: QIDI's settings assume a hot bed and a closed chamber. PLA or PETG will be easier for indoor models.
Verdict: A well-documented outdoor ASA for enclosed printers.
QIDI ASA numbers explained
47.1 MPa tensile, 180 J/m notched impact
Strength and toughness figures in the ABS class, published on the page rather than implied.
90°C heat deformation (1.8 MPa)
Parts should hold shape in a hot car or in direct summer sun better than PLA.
230-250°C nozzle, 90-110°C bed
A hotter bed than most printers' PLA defaults; QIDI also recommends an enclosed chamber.
1.75mm ±0.02mm, 1kg
A tight tolerance on a standard spool size.
What the material offers
QIDI says its ASA will not yellow, fade or crack in strong sunlight the way ABS or PETG can, and that it warps less and smells less than ABS while keeping similar toughness. Finished parts can be sanded, painted or smoothed with acetone vapor for a glossy surface. The spool is machine wound and vacuum sealed with desiccant.
Printing it
QIDI tunes it for its own enclosed machines (X-SMART3, MAX 3 and other models) but sells it as compatible with all FDM printers. In practice the chamber is what matters: keep the doors shut, run the bed at 90-110°C and the nozzle at 230-250°C. For acetone smoothing, work in a ventilated space.
Before ordering the blue QIDI ASA
Points to settle first.
Check before you buy
- Your printer has an enclosure
- The bed reaches at least 90°C
- The parts will face sun or weather
- Low stock at our check may slow delivery
The product at a glance
R QIDI Technology 1.75mm ASA Filament
Best for: Outdoor parts
- Material Type
- ASA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- ±0.02mm
- Color
- Blue
- Weight
- 2.2 pounds
View on Amazon: R QIDI Technology 1.75mm ASA Filament Affiliate link
QIDI ASA blue 1kg, 1.75mm ±0.02mm: UV and weather resistant, 47.1 MPa tensile, 90°C HDT, 230-250°C nozzle, 90-110°C bed, enclosure advised; low stock at our check.
Pros
- Full mechanical and thermal data
- UV and weather resistant
- Acetone smoothable
Cons
- Needs a 90-110°C bed
- Enclosure advised
- Low stock
Good fit if
- You print blue outdoor fittings on an enclosed printer
Skip if
- Your printer is open and its bed stops near 60°C
Verdict: A solid outdoor ASA with real numbers behind it.
Specifications side by side
| Spec | R QIDI Technology 1.75mm ASA Filament |
|---|---|
| Material Type | ASA |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | ±0.02mm |
| Compatible Material | ASA |
| Color | Blue |
| Size | 1.75Mm |
| Weight | 2.2 pounds |
Frequently asked questions
Is this QIDI product a 3D printer?
No. It is a 1kg spool of 1.75mm ASA filament in blue; the earlier title called it a printer by mistake.
What temperatures does QIDI ASA blue print at?
QIDI lists 230-250°C nozzle and 90-110°C bed, with an enclosed chamber for best results.
How heat resistant is QIDI ASA?
QIDI gives a heat deformation temperature of up to 90°C at 1.8 MPa.
Does acetone vapor work on the blue QIDI ASA spool?
Yes, the listing names acetone vapor smoothing along with sanding and painting.
Will QIDI ASA yellow in the sun?
QIDI says it resists yellowing, fading and cracking under strong sunlight, unlike ABS or PETG.
Featured in
See also
- qidi petg tough green filament review
- qidi pa12 cf carbon fiber nylon filament review
- bambu lab petg hf green filament review
- r qidi technology pla rapido filament 1 75mm review
- r qidi technology abs rapido filament review
- QIDI PETG-Tough Filament (Red, 1.75mm, 1kg) Review
- best R QIDI Technology 3d printers
- unxuey 50pcs 3d printer heatsink review
