HIKUDIY 290x210mm FEP Release Film 6-Pack Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
HIKUDIY's six-pack holds 290×210mm sheets of FEP release film, 0.15mm thick, for resin printers in the 9-10 inch class. That size covers most larger vats and can be trimmed for smaller ones; HIKUDIY says it fits printers whose film is smaller than 290×210mm. The fit lists are the thing to read carefully: the title names Anycubic Photon Mono M7, M7 Pro, M5, M5s and M5s Pro, ELEGOO Saturn 2 through Saturn 4 Ultra and Phrozen Sonic Mighty 4K, while the bullets drop the M7 and Saturn 4 models and add Mars 3, Photon Mono 4K, Mono X and M3. Measure the film window of your own vat rather than relying on either list. HIKUDIY gives over 95% transmittance, a working range of -240°C to 205°C, a 260°C melting point and up to 300% ductility. Six sheets cover a lot of film changes, which is the appeal for anyone who prints often. This review is based on HIKUDIY's listing and spec fields; we have not fitted the film.
What stands out
- 6 x FEP sheets, 290×210mm
- 0.15mm thick
- Over 95% transmittance
- Fits films under 290×210mm
- Title and bullet fit lists differ
Who it fits
Good fit for
Owners of 9-10 inch resin printers who change FEP often and want six sheets that can be trimmed to their vat.
Who should skip it
Owners of tilt-release or ACF/PFA-only vats, and anyone who wants a pre-framed vat film with no fitting work.
Verdict: A good-value stack of A4-size FEP; check your vat size since the listing's printer lists disagree.
HIKUDIY 290x210mm FEP specs
290×210mm
A4-class sheet; trim for smaller vats.
0.15mm
Standard FEP thickness.
Over 95% transmittance
Light passes for normal exposure times.
-240°C to 205°C
Stated working temperature range.
Up to 300% ductility
HIKUDIY's stretch figure for the film.
Which vats the HIKUDIY 290x210mm film suits
Plain FEP film is the traditional release layer for LCD resin vats; it wears and clouds with use and gets punctured by failed prints, so heavy users change it regularly. A 290×210mm sheet covers the frame of most 9-10 inch vats. Some newer printers ship with ACF, PFA or nFEP films and different release systems; FEP still fits the frame, but release behavior and exposure settings can change, so recheck them after a switch.
Changing film with the HIKUDIY sheets
Remove the vat's frame screws, clean the frame, lay the new sheet over the inner ring, then tighten the screws in a cross pattern. Trim the excess with a blade once the frame is closed. Tension should be even: a light tap on the film should sound like a soft drum. Run a short exposure test print after each change, since new FEP can release slightly differently.
Before buying the HIKUDIY 290x210mm FEP
Checks.
Check before you buy
- Your vat film window is under 290×210mm
- Your vat takes plain FEP film
- You can tension HIKUDIY FEP in a screw frame
- You change FEP often enough to use six sheets
The product at a glance
HIKUDIY 290x210mm FEP Film 6-Pack
Best for: Frequent FEP changes
- Primary Material
- FEP
- Dimensions
- 290x210mm
- Maximum Temperature
- 205 °C
- Release Film Type
- FEP
- Film Thickness
- 0.15mm
- Printing Technology
- LCD
View on Amazon: HIKUDIY 290x210mm FEP Film 6-Pack Affiliate link
HIKUDIY 290×210mm FEP 6-pack: 0.15mm, over 95% transmittance, -240°C to 205°C; title and bullet printer lists differ.
Pros
- Six A4-size sheets
- Trims to fit many vats
- Transmittance and thickness stated
Cons
- Printer fit lists conflict
- Needs manual tensioning
- Not pre-framed
Good fit if
- You re-film a 9-10 inch vat often
Skip if
- You want a framed, ready vat film
Verdict: Six A4-size FEP sheets for larger resin vats.
Specifications side by side
| Spec | HIKUDIY 290x210mm FEP Film 6-Pack |
|---|---|
| Primary Material | FEP |
| Dimensions | 290x210mm |
| Maximum Temperature | 205 °C |
| Release Film Type | FEP |
| Film Thickness | 0.15mm |
| Printing Technology | LCD |
| Resolution | 8K, 4K |
| Size | 290x210mm |
| Model | HKD-0152 |
Frequently asked questions
What size is the HIKUDIY FEP film?
290×210mm per sheet, 0.15mm thick.
How many sheets come in the HIKUDIY 290x210mm pack?
Six.
Does the HIKUDIY 290x210mm film fit the Photon Mono M7?
The title names the M7 and M7 Pro, but the bullets do not; measure your vat's film window.
What transmittance does the HIKUDIY 290x210mm FEP have?
Over 95%, per HIKUDIY.
Can the HIKUDIY 290x210mm film be trimmed?
Yes, it suits any vat whose film is smaller than 290×210mm once trimmed.
Featured in
See also
- chitu systems photon mono m5 m5s 12k LCD screen review
- yoopai pro resin printer enclosure review
- intarsio 52 piece 3d printer tool kit review
- hikudiy 260x200mm fep film 6 pack review
- hikudiy mars 4 5 magnetic flex build plate review
- HIKUDIY Saturn Magnetic Flex Build Plate (224x129mm) Review
- furwey 6 pack rechargeable desiccant review
- dweii 6 pack inline cord review
