As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Chitu Systems Photon Mono M5/M5s 10.1" 12K LCD Screen Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This Chitu Systems kit is a replacement 10.1-inch 12K monochrome LCD for the Anycubic Photon Mono M5 and M5s, with three protective films in the box. The resolution is 11520×5120, matching what those printers ship with, and Chitu describes it as an original-type screen. You buy this when the old LCD has failed: dead lines or patches in the exposure test, cracked glass, or cured resin that cannot be removed after an FEP leak. Mono LCDs wear with exposure time, so a heavily used M5 or M5s can also need one eventually. The listing is brief: it gives no stated lifespan in hours, no connector or ribbon details and no install guide, and the spec field only reads "screen + 3pcs films for M5S". Chitu itself warns that screens can arrive damaged in shipping and asks buyers to check it straight away. The three films are the right extra, since a fresh screen should go back under a protector. This look is based on the Chitu Systems listing and spec fields; we have not installed the screen.

What stands out

  • 10.1-inch 12K mono LCD
  • 11520×5120
  • Fits Photon Mono M5 / M5s
  • 3 protective films included
  • No lifespan or connector details listed

Who it fits

Good fit for

Photon Mono M5 or M5s owners whose LCD has dead areas, cracks or resin damage and who are comfortable opening the printer.

Who should skip it

Owners of other Anycubic models, and anyone whose print problems come from the FEP, exposure or leveling rather than the screen.

Verdict: The direct replacement screen for an M5/M5s with a failed LCD; test it before and after fitting.

Chitu M5/M5s screen specs

10.1-inch mono LCD

Same size class as the M5 and M5s.

12K, 11520×5120

Matches those printers' resolution.

3 protective films

Cover the new screen against resin.

Fragile in transit

Chitu asks for a check on arrival.

No lifespan figure

Listing gives no hours rating.

When an M5 or M5s needs a new LCD

Before replacing a screen, run the printer's exposure or screen test with a sheet of paper over the LCD. Missing lines, dark blocks or flicker point to the screen; clean, even patterns with failed prints point elsewhere, usually FEP, leveling or exposure times. Physical cracks and resin bonded to the glass also call for a new screen. If the test is clean, this part is not the fix.

Swapping the Chitu M5/M5s screen

Power off, remove the vat and the protector, then open the printer to reach the screen's ribbon cable as Anycubic's own service steps describe. Handle the ribbon gently, seat it fully, and run the screen test before reassembling the printer completely. Fit one of the included films once the new screen tests clean, then re-level the build plate.

Before buying the Chitu M5/M5s screen

Checks.

Check before you buy

  • Your printer is an Anycubic Photon Mono M5 or M5s
  • Your M5 screen test shows LCD faults
  • You can open the M5 and reseat a ribbon cable
  • You will test the Chitu screen on arrival

The product at a glance

Chitu Systems 10.1" LCD Screen for M5/M5S

Best for: Failed M5/M5s LCDs

Dimensions
10.1 inches
Screen Resolution
11520 x 5120
Printing Technology
LCD

View on Amazon: Chitu Systems 10.1" LCD Screen for M5/M5S Affiliate link

Chitu 10.1-inch 12K mono LCD for Photon Mono M5/M5s: 11520×5120, three protective films; no lifespan or connector details.

Pros

  • Direct M5/M5s screen replacement
  • Three screen films included
  • Matches the 12K resolution

Cons

  • Thin listing, no install guide
  • No lifespan rating
  • Fragile in shipping

Good fit if

  • Your M5 or M5s screen has failed

Skip if

  • Your screen test is clean

Verdict: A direct 12K screen replacement for the M5 and M5s.

Specifications side by side

Spec Chitu Systems 10.1" LCD Screen for M5/M5S
Dimensions 10.1 inches
Screen Resolution 11520 x 5120
Printing Technology LCD
Resolution 12K
Size screen+ 3pcs films for M5S

Frequently asked questions

Which printers does the Chitu 10.1-inch 12K screen fit?

Only the M5 and M5s from Anycubic's Photon Mono line.

What resolution is the Chitu M5s replacement screen?

12K, 11520×5120, 10.1-inch monochrome.

Does the Chitu M5/M5s screen come with protectors?

Yes, three protective films are included.

How long does the Chitu M5/M5s screen last?

The listing gives no lifespan rating, only that mono LCDs are more durable.

What should I check when the Chitu M5/M5s screen arrives?

Chitu warns of shipping damage; inspect it and test it as soon as it arrives.

See also