HIKUDIY Magnetic Flex Build Plate for ELEGOO Mars 4/5 Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Prying resin prints off a solid plate with a scraper risks gouging the plate and cracking thin parts. HIKUDIY's kit for the ELEGOO Mars 4, Mars 4 Ultra, Mars 5 and Mars 5 Ultra solves that with two pieces: a magnetic base that sticks onto your existing build plate and a 160 × 96mm spring steel sheet that sits on it. After printing, you lift off the sheet and bend it so the model pops free. The steel surface is CNC-brushed to give resin something to grip, and the sheet has a handle for lifting it. The trade-off is height: the kit is 3-4mm thick, so the printer's maximum Z height drops by that much and you must level again after fitting it. Everything here follows HIKUDIY's listing.
What stands out
- Magnetic base plus 160 × 96mm steel sheet
- Bend to release prints
- For Mars 4, 4 Ultra, 5 and 5 Ultra
Who it fits
Good fit for
ELEGOO Mars 4 or Mars 5 owners who print many small parts and want fast, scraper-free removal.
Who should skip it
Owners who need every millimetre of Z height, and printers outside the Mars 4/5 family.
Verdict: A worthwhile removal upgrade for Mars 4 and 5 owners who can spare 3-4mm of height.
HIKUDIY Mars flex plate specs
160 × 96mm
Mars 4/5 plate size.
Spring steel sheet
Bends to release.
Magnetic base
Sticks to your plate.
CNC-brushed surface
Helps resin grip.
3-4mm thick
Z height drops by that.
Model HKD-0081
HIKUDIY part code.
Flex removal and its cost
Bending the sheet breaks the bond along the bottom of the print, so supports and thin bases come away without a blade. That is quicker and safer than scraping, especially on brittle resins. The cost is the 3-4mm the kit adds: tall prints near the Mars's limit will no longer fit, and every plate change needs the sheet seated flat on the magnet.
Fitting it
Clean the stock plate with alcohol, stick the magnetic base on and press it down, let it settle, place the steel sheet and level the printer again. Choose the HIKUDIY kit for faster part removal on a Mars 4 or 5; keep the stock plate if your prints regularly use the full build height.
Before you order
Checks for the HIKUDIY Mars flex plate.
Check before you buy
- Your printer is a Mars 4, 4 Ultra, 5 or 5 Ultra
- You can give up 3-4mm of Z height
- You will re-level after fitting
- The stock plate is clean and dry first
The product at a glance
HIKUDIY 160x96mm Spring Steel Build Plate
Best for: ELEGOO Mars 4 and 5
- Primary Material
- Spring Steel
- Dimensions
- 160x96mm
- Printing Technology
- DLP
View on Amazon: HIKUDIY 160x96mm Spring Steel Build Plate Affiliate link
HIKUDIY flex kit for ELEGOO Mars 4/5: magnetic base plus 160 × 96mm brushed spring steel sheet; adds 3-4mm, so Z height drops.
Pros
- Scraper-free removal
- Brushed steel grips resin
- Handle for lifting
Cons
- Loses 3-4mm of Z height
- Needs re-leveling
Good fit if
- You own a Mars 4 or Mars 5
- You print many small parts
Skip if
- You use the full build height
Verdict: A smart removal upgrade for Mars owners.
Specifications side by side
| Spec | HIKUDIY 160x96mm Spring Steel Build Plate |
|---|---|
| Primary Material | Spring Steel |
| Dimensions | 160x96mm |
| Printing Technology | DLP |
| Build Plate Material | Spring Steel |
| Size | Mars 4/5 (160x96mm) |
| Model | HKD-0081 |
Frequently asked questions
Which printers fit the HIKUDIY 160 × 96mm flex plate?
The ELEGOO Mars 4, Mars 4 Ultra, Mars 5 and Mars 5 Ultra.
What are the two pieces in the HIKUDIY kit?
A magnetic base and a spring steel sheet.
Does the HIKUDIY flex plate reduce build height?
Yes, by 3-4mm.
Do I need to level after fitting the HIKUDIY plate?
Yes, HIKUDIY says to re-level.
How do prints come off the HIKUDIY steel sheet?
Lift the sheet off and bend it.
Featured in
See also
- chitu systems photon mono m5s screen film 3 pack review
- tmypn elegoo saturn screen protector 8 pack review
- tophomer dual drive bmg extruder review
- hikudiy 260x200mm fep film 6 pack review
- hikudiy 290x210mm fep release film 6 pack review
- HIKUDIY Saturn Magnetic Flex Build Plate (224x129mm) Review
- elegoo jupiter 2 16k resin 3d printer review
- onejunbb 2 PCs zinc alloy review
