HIKUDIY Saturn Magnetic Flex Build Plate (224x129mm) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
HIKUDIY's Saturn kit puts a spring steel flex plate on a magnetic base that you stick onto the stock build plate of an ELEGOO Saturn 2 8K, Saturn 8K, Saturn 3, Saturn 3 Ultra, Saturn 4 or Saturn 4 Ultra. The steel sheet measures 224×129mm, matching the 10-inch Saturn plate, and once a print finishes you lift it off by its handle and flex it so parts pop free instead of being scraped. The surface is CNC-brushed for grip. The trade-off is height: plate and magnet together are 3-4mm thick, so you give up that much Z travel and must re-level the printer after fitting. The title reads "2 PCS", which the listing does not break down; expect a plate and its base unless the seller confirms two plates. Our notes come from HIKUDIY's listing only; we have not fitted the kit.
What stands out
- 224×129mm spring steel sheet
- Saturn 2 8K, 8K, 3, 3 Ultra, 4, 4 Ultra
- Adhesive magnetic base
- 3-4mm thick, costs that much Z height
- Handle for lifting the sheet
Who it fits
Good fit for
Saturn owners who print large, flat or thin-walled resin parts that crack or gouge when scraped off the stock plate.
Who should skip it
Anyone printing to the Saturn's full height, owners who do not want to re-level, and Mars or Photon owners (other sizes).
Verdict: A Saturn-size flex kit that trades a few millimeters of Z for easier part removal.
HIKUDIY Saturn flex plate specs
224×129mm
The 10-inch Saturn plate size.
3-4mm total
Plate plus magnet; Z height drops by the same amount.
CNC-brushed steel
Textured face for resin grip.
Magnetic base
Sticks permanently to the stock plate.
"2 PCS" in title
Contents not itemized in the bullets.
How the HIKUDIY Saturn kit fits
The magnetic sheet is stuck to the face of the Saturn's existing aluminum build plate, so that plate stays on the printer and becomes the carrier. HIKUDIY asks for the plate to be cleaned with alcohol and fully dried first, then the magnet pressed down and left to settle before the steel sheet goes on. The steel has a handle for lifting, and after flexing it springs back flat for reuse. Because the stack is 3-4mm thicker than before, the printer's zero point moves and leveling must be redone.
Day to day with the HIKUDIY flex plate
After a print, lift the sheet off with its handle while wearing gloves, bend it gently over the wash container and let parts drop instead of levering them with a scraper. Wipe resin off the magnet side before refitting, because residue can stop it seating flat and spoil the next first layer. If parts start to release early, scuff and clean the face rather than raising bottom exposure blindly.
Before buying the HIKUDIY Saturn flex plate
Checks.
Check before you buy
- Your Saturn takes a 224×129mm HIKUDIY sheet
- You can spare 3-4mm of Saturn Z height for the HIKUDIY stack
- You will re-level the Saturn after fitting the HIKUDIY base
- You confirmed what HIKUDIY's "2 PCS" includes
The product at a glance
HIKUDIY 224x129mm Spring Steel Flex Build Plate
Best for: ELEGOO Saturn owners
- Primary Material
- Spring steel + Magnetic base
- Dimensions
- 224x129mm
- Build Surface Type
- CNC drawn steel
- Resolution
- 8K
View on Amazon: HIKUDIY 224x129mm Spring Steel Flex Build Plate Affiliate link
HIKUDIY Saturn flex kit: 224×129mm spring steel sheet on an adhesive magnetic base, 3-4mm total thickness, CNC-brushed face, handle; fits Saturn 2 8K, 8K, 3, 3 Ultra, 4, 4 Ultra.
Pros
- Bend-off part removal
- Fits six Saturn models
- Handle for lifting
Cons
- Loses 3-4mm of Z
- Pack contents unclear
Good fit if
- Your Saturn 3 Ultra parts crack when scraped off
Skip if
- You print full-height parts on a Saturn 4
Verdict: Easier removal on 10-inch Saturns, at a small height cost.
Specifications side by side
| Spec | HIKUDIY 224x129mm Spring Steel Flex Build Plate |
|---|---|
| Primary Material | Spring steel + Magnetic base |
| Dimensions | 224x129mm |
| Build Surface Type | CNC drawn steel |
| Build Plate Material | Spring Steel |
| Resolution | 8K |
| Size | Saturn 4/3/2 (224x129mm) |
| Model | HKD-0079 |
Frequently asked questions
Which printers does the HIKUDIY 224×129mm flex plate fit?
ELEGOO Saturn 2 8K, Saturn 8K, Saturn 3, Saturn 3 Ultra, Saturn 4 and Saturn 4 Ultra.
How much build height does the HIKUDIY Saturn plate cost?
3-4mm, the thickness of the plate and magnetic base.
Do I need to re-level after fitting the HIKUDIY Saturn kit?
Yes, HIKUDIY says leveling must be reset after installing it.
What does "2 PCS" mean on the HIKUDIY Saturn flex plate?
The listing does not say; it most likely means a plate and its magnetic base, so ask the seller if you expect two plates.
How do I fit the HIKUDIY magnetic base?
Clean the stock plate with alcohol, dry it, stick the magnet down and let it settle before adding the steel sheet.
Featured in
See also
- hanglife gt2 9mm 10m timing belt copper buckles review
- elegoo standard resin grey 1kg review
- sunlu nylon like resin grey 2kg review
- hikudiy 260x200mm fep film 6 pack review
- hikudiy mars 4 5 magnetic flex build plate review
- HIKUDIY 290x210mm FEP Release Film 6-Pack Review
- jbl tune flex 2 review
- yeekidaij 2 PCs thermostatic radiator review
