Intarsio 52-Piece 3D Printer Tool Kit Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Intarsio's 52-piece kit sits between its 34- and 68-piece sets, and the listing says 18 of the tools are new to this version. What you get, by the bullets: a deburring tool with five BS1010 blades, a black A5 self-healing cutting mat, a precision knife with five SK5 blades, a filament and PTFE tube cutter for square cuts, a metal heat block wrench and a 5-in-1 wrench, ten nozzle cleaning needles from 0.2 to 0.4mm, two MK8 brass nozzles (0.2mm and 0.4mm), a steel scraper for stubborn PETG and ABS prints, a plastic razor scraper with ten spare blades, a file set, and a storage bag with fitted compartments. The bullets do not itemize all 52 pieces, so the count includes blades and needles. The cutting mat and knife make this a post-processing kit as much as a maintenance one: support scars, brims and seams are where most of these tools get used. The "all FDM/SLA printers" claim needs a caveat: the brass nozzles fit MK8-style hotends only, and the needles and PTFE cutter are FDM tools. There is a 1-year warranty. This review is drawn from Intarsio's listing; we have not used the kit.
What stands out
- 52 pieces incl. blades and needles
- Deburring tool + A5 cutting mat + SK5 knife
- PTFE / filament cutter, heat block wrench
- 10 needles (0.2-0.4mm), 2 MK8 nozzles
- Steel + plastic razor scrapers, bag, 1-year warranty
Who it fits
Good fit for
FDM printer owners who want one bag covering print removal, support cleanup, PTFE cuts and nozzle care, with a mat to work on.
Who should skip it
Owners who already have a deburring tool and scrapers, resin-only users who need little beyond a scraper, and non-MK8 hotend owners hoping to use the nozzles.
Verdict: A well-chosen middle kit with useful post-processing extras; the nozzles only help MK8-style hotends.
Intarsio 52-piece kit contents
Deburring tool, 5 BS1010 blades
Removes support marks and edge burrs.
A5 self-healing mat + SK5 knife
A safe surface for trimming prints.
PTFE/filament cutter
Square cuts for a tight hotend seal.
10 needles, 2 MK8 nozzles
Clears clogs; nozzles fit MK8 hotends only.
Steel + plastic scrapers
Steel for stubborn parts, plastic for delicate beds.
What the Intarsio 52-piece kit covers
Most of these tools are used after a print comes off the bed: the scrapers to release it, the deburring tool and knife to clean support scars and brims, the files for edges, and the mat to work on without marking the desk. The PTFE cutter matters on Bowden printers and when replacing the tube inside a hotend, where an angled cut leaves a gap that causes clogs. The heat block wrench holds the block while you change a nozzle so the heater wires are not stressed.
Using the Intarsio kit day to day
Use the plastic razor scraper on PEI and coated plates and keep the steel scraper for bare glass or very stuck prints. Choose needles slightly smaller than the nozzle bore and push them through a hot nozzle only. Swap knife and deburring blades as soon as they drag; dull blades slip, which is how most hand cuts happen. Check that your hotend uses MK8-type nozzles before fitting the brass spares.
Before buying the Intarsio 52-piece kit
Checks.
Check before you buy
- You want Intarsio post-processing tools, not just scrapers
- Your hotend takes MK8 nozzles if you plan to use Intarsio's spares
- You cut PTFE tube or service a Bowden printer
- You want a cutting mat with the Intarsio tools
The product at a glance
Intarsio 52-in-One 3D Printer Tools Kit
Best for: FDM upkeep and cleanup
- Printing Technology
- FDM
- Color
- Black
- Dimensions
- 6.69 × 1.57 × 9.84 inches
View on Amazon: Intarsio 52-in-One 3D Printer Tools Kit Affiliate link
Intarsio 52-piece kit: deburring tool, A5 mat, SK5 knife, PTFE cutter, wrenches, 10 needles, 2 MK8 nozzles, scrapers, files, bag.
Pros
- Post-processing tools plus cutting mat
- PTFE cutter and heat block wrench
- Fitted storage bag
Cons
- Nozzles fit MK8 hotends only
- Piece count includes blades and needles
- Some tools are FDM-only
Good fit if
- You want one kit for cleanup and upkeep
Skip if
- You already own most of these tools
Verdict: A mid-size tool kit with useful cleanup extras.
Specifications side by side
| Spec | Intarsio 52-in-One 3D Printer Tools Kit |
|---|---|
| Printing Technology | FDM |
| Color | Black |
| Dimensions | 6.69 × 1.57 × 9.84 inches |
Frequently asked questions
What comes in the Intarsio 52-piece kit?
Deburring tool and blades, A5 cutting mat, knife, PTFE cutter, wrenches, needles, two MK8 nozzles, scrapers, files and a storage bag.
Do the Intarsio 52-piece kit nozzles fit my printer?
They are MK8 brass nozzles (0.2mm and 0.4mm), which fit MK8-style hotends only.
Is the Intarsio 52-piece kit useful for resin printers?
Partly: scrapers, knife, files and the mat help; the needles and PTFE cutter are FDM tools.
How does the Intarsio 52-piece kit compare with the 34 and 68-piece kits?
It sits between them; the listing says 18 tools are new in this version.
Does the Intarsio 52-piece kit have a warranty?
Yes, Intarsio gives a 1-year warranty.
