As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

YOOPAI Pro Resin 3D Printer Enclosure (L2) Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The YOOPAI Pro is a soft resin printer enclosure, a tent with a zippered front door, built to contain resin smell and route it outside. Its ventilation is the main feature: a 12V variable-speed fan, an enlarged carbon filter and a flexible exhaust duct, plus a second port with a hook-and-loop flap that can be opened for make-up air so the fan does not pull the tent inward. It also has an LED light, an amber-tinted window to cut ambient UV while you watch, a front display for temperature and humidity, an outside tool pocket, and insulation that YOOPAI says keeps the inside at a steadier temperature for resin flow. YOOPAI names the Saturn 4 Ultra, Mars 5 Ultra, Photon Mono 4 and HALOT X1 as fits. The size figures conflict: the listing says 18.9×18.9×28.3 inches, while the spec field says 15.7×15.7×27.6 inches, so measure your printer with its lid lifted and compare with the smaller set. YOOPAI says the tent is meant for ventilated workshops, studios and garages. This write-up comes from YOOPAI's listing and spec fields; we have not set the tent up.

What stands out

  • Soft resin printer tent, zip front door
  • 12V variable fan, carbon filter, exhaust duct
  • Make-up air flap on the second port
  • LED, amber window, temp-humidity display
  • 18.9×18.9×28.3in listed vs 15.7×15.7×27.6in spec

Who it fits

Good fit for

Resin printer owners in a garage, studio or workshop who want to vent fumes out of a window and watch temperature and humidity.

Who should skip it

Anyone without a window or vent for the duct, or with a tall printer whose lid may not clear the smaller size figure.

Verdict: A well-equipped vented tent for small and midsize resin printers; confirm the real size first.

YOOPAI Pro enclosure specs

12V variable fan

Set airflow to the room and the smell.

Carbon filter + duct

Filters and routes air outside.

Make-up air flap

Lets fresh air in so the tent does not collapse.

Temp-humidity display

Resin prints more consistently when warm and dry.

Size conflict

18.9×18.9×28.3in vs 15.7×15.7×27.6in.

What the YOOPAI Pro does for a resin setup

Resin smell comes from the open vat and from parts drying after washing. A tent with an exhaust duct keeps those vapors inside a small space and pushes them through a filter and out of a window, which is the main reason to buy one. The insulation helps in a cold garage, where resin thickens and prints can fail. The temperature and humidity display tells you when it is too cold to print, and the amber window lets you check progress without opening the door.

Setting up the YOOPAI Pro tent

Place the tent near a window and run the duct outside with as few bends as possible. Start the fan low and raise it until no smell escapes at the door seams, and open the make-up air flap a little if the walls pull in. Leave room for the printer's lid to lift fully; check this against the smaller listed height. Replace the carbon filter when the smell returns at the usual fan speed.

Before buying the YOOPAI Pro enclosure

Checks.

Check before you buy

  • Your resin printer with lid open fits 15.7×15.7×27.6in
  • You can run the YOOPAI duct to a window or vent
  • You print resin in a garage, studio or workshop
  • You want a temp-humidity readout on the YOOPAI tent

The product at a glance

YOOPAI Pro Resin 3D Printer Enclosure

Best for: Garage and studio resin printing

Printing Technology
Resin
Color
Black
Dimensions
15.7 × 15.7 × 27.6 inches

View on Amazon: YOOPAI Pro Resin 3D Printer Enclosure Affiliate link

YOOPAI Pro resin tent: 12V variable fan, carbon filter, duct, make-up air flap, LED, amber window, temp-humidity display; size figures conflict.

Pros

  • Variable fan with filter and duct
  • Temp-humidity display
  • Amber UV-cut window

Cons

  • Listed and spec sizes differ
  • Needs a window or vent for the duct
  • Soft tent, not a rigid cabinet

Good fit if

  • You vent a resin printer to a window

Skip if

  • You have nowhere to run the duct

Verdict: A vented resin tent with climate readout.

Specifications side by side

Spec YOOPAI Pro Resin 3D Printer Enclosure
Printing Technology Resin
Color Black
Dimensions 15.7 × 15.7 × 27.6 inches
Size Adjustable Fan
Model Resin Enclosure L2

Frequently asked questions

Which printers fit the YOOPAI Pro resin enclosure?

YOOPAI names the Saturn 4 Ultra, Mars 5 Ultra, Photon Mono 4 and HALOT X1; measure your own with the lid open.

What size is the YOOPAI Pro resin enclosure?

The listing says 18.9×18.9×28.3 inches; the spec field says 15.7×15.7×27.6 inches.

Does the YOOPAI Pro tent have a filter?

Yes, an enlarged carbon filter with a 12V variable fan and exhaust duct.

What does the YOOPAI Pro display show?

Temperature and humidity inside the tent.

Why does the YOOPAI Pro tent have a second port flap?

It lets in make-up air so the fan does not pull the tent inward.

See also