As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

HIKUDIY 260x200mm FEP Release Film 6-Pack Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Release film is the part of a resin printer that wears fastest: each layer peels away from it, and scratches or cloudy patches soon show up as failed prints. HIKUDIY's 6-pack of FEP sheets measures 260 × 200 × 0.15mm and is sold for vats of that size or smaller. The named printers include the ELEGOO Mars 4, Mars 4 Ultra, Saturn, Saturn S and Mars 3 Pro, the Anycubic Photon Mono X, Mono X2, Mono X 6K, Photon M3 and M3 Plus, and the Phrozen Sonic Mini 8K and Mighty 4K. HIKUDIY lists transmittance over 95%, a working range of -240°C to 205°C, a 260°C melting point and up to 300% elongation. Smaller vats need the sheet trimmed to fit. These figures are taken from HIKUDIY's listing.

What stands out

  • Six 260 × 200mm sheets
  • 0.15mm FEP, over 95% transmittance
  • Fits many ELEGOO, Anycubic and Phrozen vats

Who it fits

Good fit for

Owners of Mars 4, Saturn, Photon Mono X or Sonic Mini 8K class printers who re-film their own vats.

Who should skip it

Users who would rather buy a pre-filmed vat, and owners of printers that use nFEP, ACF or PFA films by design.

Verdict: A good-value stack of standard FEP for printers that use it.

HIKUDIY FEP 6-pack specs

260 × 200 × 0.15mm

Sheet size.

6 sheets

Several re-films.

Over 95% transmittance

UV passes through.

-240°C to 205°C

Working range.

260°C melting point

Listed.

300% elongation

Listed ductility.

Fitting FEP to a vat

Re-filming means removing the vat frame, laying the new sheet flat, tightening the frame screws evenly and trimming the excess. The aim is an even, drum-like tension. Too loose and layers peel badly; too tight and the sheet tears. With six sheets, a mistake on the first attempt does not mean ordering again.

When to change the film

Change it when you see cloudy areas, scratches you can feel, dents from fallen parts or any leak. Choose this HIKUDIY pack if your vat takes standard FEP up to 260 × 200mm; choose the matching ACF or PFA film if your printer shipped with one of those, since swapping film type changes release behaviour.

Before you order

Checks for HIKUDIY FEP film.

Check before you buy

  • Your vat is 260 × 200mm or smaller
  • Your printer uses standard FEP
  • You have the screwdriver for the vat frame
  • You can trim the sheet neatly

The product at a glance

HIKUDIY 260x200mm FEP Release Film 6-Pack

Best for: Standard FEP vats

Dimensions
260 x 200mm
Maximum Temperature
205 °C
Release Film Type
FEP
Film Thickness
0.15mm
Resolution
8K, 4K

View on Amazon: HIKUDIY 260x200mm FEP Release Film 6-Pack Affiliate link

HIKUDIY 6-pack FEP, 260 × 200 × 0.15mm, over 95% transmittance, for Mars 4, Saturn, Photon Mono X, Sonic Mini 8K and other vats up to that size.

Pros

  • Six sheets per pack
  • Long compatible-printer list
  • High transmittance

Cons

  • Trim needed for small vats
  • Not for ACF or PFA vats

Good fit if

  • You re-film your own vats
  • Your vat takes standard FEP

Skip if

  • You prefer pre-filmed vats

Verdict: A solid FEP supply for common resin printers.

Specifications side by side

Spec HIKUDIY 260x200mm FEP Release Film 6-Pack
Dimensions 260 x 200mm
Maximum Temperature 205 °C
Release Film Type FEP
Film Thickness 0.15mm
Resolution 8K, 4K
Size 260x200mm
Model HKD-0151

Frequently asked questions

What size are HIKUDIY FEP sheets?

260 × 200 × 0.15mm.

How many FEP sheets come in the HIKUDIY pack?

Six.

Does HIKUDIY FEP fit the ELEGOO Saturn?

Yes, the Saturn and Saturn S are on HIKUDIY's list.

What is the transmittance of HIKUDIY FEP?

Over 95%.

Can HIKUDIY FEP fit a smaller vat?

Yes, it is sold for vats up to 260 × 200mm; trim the excess.

See also