As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

JAMG HE Temporary Dental Resin A3 500g Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

JAMG HE's Temporary Dental Resin in shade A3 is made for printing temporary crowns and bridges on 405nm DLP and LCD printers. Its figures are more specific than most resin pages: shrinkage of about 0.2%, cured hardness of 80-90D, and layers that cure in close to 3 seconds. A3 is one of the most common tooth shades, and JAMG HE says parts can be polished to a scratch-resistant, natural-looking finish after secondary curing. The serious gap is regulatory. A resin that goes in a patient's mouth normally comes with a stated biocompatibility standard or clearance, and this listing names none. That does not mean the resin is unsafe; it means a dental lab should get the documentation from JAMG HE before clinical use, and hobbyists should not use it for anything worn in the mouth. The page also calls the parts 'models' in places. This review rests on JAMG HE's listing text.

What stands out

  • A3 tooth shade
  • Shrinkage about 0.2%
  • 80-90D hardness after curing
  • Near 3-second layers at 405nm

Who it fits

Good fit for

Dental labs and clinics with 405nm DLP or LCD printers who print temporary crowns and bridges and can verify the resin's documentation with the maker.

Who should skip it

Hobbyists, and any lab that needs a biocompatibility certificate shown up front; none is listed.

Verdict: Clear figures for a temporary crown resin, but get the certification paperwork before clinical use.

JAMG HE temporary resin figures

Shade A3

A common natural tooth color.

Shrinkage about 0.2%

Helps margins and bite fit stay accurate.

Hardness 80-90D

Shore D range for a rigid, polishable part.

About 3s per layer, 405nm

A fast exposure on DLP and LCD printers.

500g bottle

Small batch size suited to dental work.

Biocompatibility certification

Not stated on the listing.

Where this resin fits in JAMG HE's dental range

JAMG HE sells separate resins for each dental job: model resins for study casts, a clear guide resin, a castable resin for lost-wax work, a flexible gingiva mask and this temporary resin. Choose the temporary A3 resin when the printed part is the restoration itself; choose a model resin for casts and dies, where tooth color and mouth contact do not matter.

Printing and finishing

JAMG HE quotes close to 3 seconds per layer on 405nm machines; treat that as a starting point and calibrate on your own printer. After washing, the part needs secondary curing, then polishing and surface treatment, which the listing says gives a scratch-resistant finish. Glazing or characterization steps are not described.

Before ordering the A3 temporary resin

Clinical use needs paperwork the listing does not show.

Check before you buy

  • You get biocompatibility documents from JAMG HE
  • Your printer is 405nm DLP or LCD for the A3 resin
  • A3 matches your JAMG HE shade needs

The product at a glance

JH JAMG HE Temporary Dental Resin A3

Best for: Dental lab temporary crowns

Resin Type
Temporary Dental
Curing Wavelength
405nm
Compatible Technology
DLP, LCD
Net Weight
500g
Application
Temporary dental crowns and bridges
Shore Hardness
80-90D

View on Amazon: JH JAMG HE Temporary Dental Resin A3 Affiliate link

JAMG HE A3 temporary crown and bridge resin, 500g: 405nm, 80-90D, about 0.2% shrinkage, near 3s layers.

Pros

  • Specific shrinkage and hardness figures
  • Common A3 shade
  • Fast layer cure

Cons

  • No biocompatibility certificate listed
  • Small 500g bottle

Good fit if

  • You run a dental lab
  • You print temporary crowns

Skip if

  • You are a hobbyist

Verdict: Promising lab resin; confirm certification first.

Specifications side by side

Spec JH JAMG HE Temporary Dental Resin A3
Resin Type Temporary Dental
Curing Wavelength 405nm
Compatible Technology DLP, LCD
Net Weight 500g
Application Temporary dental crowns and bridges
Shore Hardness 80-90D
Printing Technology Resin
Features High Precision, Fast Curing
Color A3
Model DN

Frequently asked questions

Is JAMG HE temporary resin certified for use in the mouth?

The listing does not name any biocompatibility standard or clearance; ask JAMG HE for documentation.

How hard is JAMG HE temporary resin after curing?

JAMG HE lists 80-90D.

What shrinkage does JAMG HE give for the A3 resin?

About 0.2%.

What layer time does JAMG HE suggest for the A3 resin?

Close to 3 seconds per layer on 405nm DLP or LCD printers.

See also