Siraya Tech Blu Lava PC-Like Resin Black 1kg Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Blu Lava is Siraya Tech's ultra-tough, PC-like member of the Blu family, here in Lava Black and a 1kg bottle. It is aimed at functional parts rather than miniatures: brackets, housings, jigs and threaded parts. Siraya Tech's most useful claim is that cured parts can be tapped without cracking, which is where many tough resins fail, so you can cut threads or fit inserts into load-bearing pieces. It also says Blu passes ISO 10993-5 and 10993-10, the cytotoxicity and skin-sensitization tests used for medical devices. That is a biocompatibility claim, not a reason to skip gloves when handling liquid resin. The listing is short: no tensile strength, elongation, heat deflection or exposure settings, so compare with Siraya's technical data sheet before using it for real loads. For a maker who wants screwable, rigid resin parts, it is a strong candidate. We relied on Siraya Tech's listing text only.
What stands out
- PC-like rigidity and strength
- Tappable without cracking
- ISO 10993-5 / 10993-10 cited
- LCD and DLP printers
Who it fits
Good fit for
Makers printing brackets, enclosures, jigs and parts that take screws or threaded inserts on an LCD or DLP printer.
Who should skip it
Miniature painters who do not need the toughness, and anyone who needs the mechanical data on the product page.
Verdict: A tappable, PC-like resin for functional parts; check Siraya's data sheet for numbers.
Blu Lava Black specs and meaning
PC-like durability and rigidity
Stiff parts that resist load, per Siraya Tech.
Tappable without cracking
Cut threads or add inserts.
ISO 10993-5 / 10993-10
Cytotoxicity and skin-sensitization standards.
LCD/DLP printers
Wavelength not stated in the bullets.
1kg, Lava Black
Also Lava Grey 1kg and Lava Black 2kg.
Lava, Blu Tough or Blu Nylon-Like
Siraya Tech's Blu line splits by behavior. Choose Blu Lava when you want the most rigid, PC-like part that holds threads. Choose Blu Tough (Easy Grey or Clear V2) for a general tough resin that is easier to start with. Choose Blu Nylon-Like when a part must bend and spring back rather than stay stiff. Lava Black suits finished functional parts; Lava Grey shows surface detail better while you check fit.
Working with Blu Lava
Tough engineering resins are usually thicker than standard resin, so a warm room and a slower lift help; the listing itself gives no viscosity or exposure. Wash and post-cure fully before tapping, since an under-cured part is softer. Drill a pilot hole first and tap slowly by hand.
Before ordering Blu Lava Black
A few checks for Siraya's PC-like resin.
Check before you buy
- Your printer is LCD or DLP for Blu Lava
- You need threads or inserts in Blu Lava parts
- You will look up Siraya's Blu Lava data sheet
The product at a glance
Siraya Tech Blu Lava Black 1kg
Best for: Functional parts with threads
- Resin Type
- Ultra-Tough PC-Like
- Compatible Technology
- LCD, DLP
- Net Weight
- 1kg
- Application
- Brackets, housings, industrial parts
- Printing Technology
- Resin
- Dimensions
- 3.94 × 3.94 × 8.27 inches
View on Amazon: Siraya Tech Blu Lava Black 1kg Affiliate link
Siraya Tech Blu Lava Black 1kg: PC-like, ultra-tough resin for functional parts, tappable, ISO 10993-5/-10 cited.
Pros
- Holds tapped threads
- Rigid, PC-like parts
- Biocompatibility standards cited
Cons
- No strength figures listed
- No exposure settings listed
Good fit if
- You print screwable brackets
- You need stiff housings
Skip if
- You print display minis only
Verdict: A strong pick for rigid, functional resin parts.
Specifications side by side
| Spec | Siraya Tech Blu Lava Black 1kg |
|---|---|
| Resin Type | Ultra-Tough PC-Like |
| Compatible Technology | LCD, DLP |
| Net Weight | 1kg |
| Application | Brackets, housings, industrial parts |
| Printing Technology | Resin |
| Dimensions | 3.94 × 3.94 × 8.27 inches |
| Weight | 2.2 pounds |
| Color | Lava Black 1kg |
| Model | Blu Lava Black 1kg |
Frequently asked questions
Can Blu Lava parts be tapped for screws?
Yes. Siraya Tech says Blu Lava is tappable without cracking and suits threaded inserts.
Which biocompatibility tests does Lava Black cite?
Siraya Tech cites ISO 10993-5 and 10993-10 for Blu resin; liquid resin still needs gloves.
What is the difference between Blu Lava and Blu Tough?
Blu Lava is the PC-like, ultra-tough version aimed at rigid, load-bearing parts; Blu Tough is the general high-strength resin.
Does Blu Lava come in larger bottles?
Lava Black is also sold in 2kg; Lava Grey is sold in 1kg.
