As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Comgrow Black PETG Filament 1kg Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Comgrow's black PETG is a 1kg, 1.75mm spool aimed squarely at functional prints, and the reason it stands out among budget PETG is that the page actually gives settings: 235-240°C at the nozzle, 70°C on the bed and 30mm/s. Comgrow pitches it for mechanical parts, holders, clamps and replacement printer parts, where PETG's impact resistance and layer bonding beat PLA. Diameter tolerance is listed as ±0.02mm, and the spool arrives dried and vacuum sealed. Black is the practical color for this kind of work since brackets and printer parts rarely need to look bright. The 30mm/s speed is conservative; faster machines can go higher once the first prints look clean. Everything here is drawn from Comgrow's listing and its stated settings, without a printed sample.

What stands out

  • Settings listed: 235-240°C / 70°C bed / 30mm/s
  • Tough, impact-resistant PETG
  • 1.75mm ±0.02mm
  • Vacuum sealed after drying

Who it fits

Good fit for

Makers printing brackets, clamps, tool holders and printer upgrades who want a low-cost black PETG with a known starting profile.

Who should skip it

Anyone after a fast-print PETG for 300mm/s+ machines; Comgrow's listed 30mm/s points to a standard formula.

Verdict: A solid black workhorse PETG for functional parts, with settings you can start from.

Comgrow black PETG, what the numbers mean

235-240°C nozzle

A typical PETG window; start at 235°C.

70°C bed

Hot enough for PETG to stick without warping.

30mm/s

Comgrow's cautious speed; a baseline, not a ceiling.

±0.02mm on 1.75mm

Steady extrusion on most FDM printers.

Model ZSPETGBKNEW1

Comgrow's code for the 1kg black spool.

Why PETG for parts

PETG sits between PLA and ABS: tougher and more heat tolerant than PLA, easier to print than ABS with no enclosure needed. Comgrow highlights layer adhesion, which is what keeps clips and brackets from splitting along layers. The spec field gives 1 lb for a spool sold as 1kg; trust the 1kg in the title.

Printing Comgrow black PETG

Load the listed 235-240°C and 70°C, then raise speed in steps once a test part looks clean. PETG strings more than PLA, so tune retraction. A textured PEI or glue-coated plate helps the part release cleanly. Dry the spool again if it has sat open for weeks.

Before buying Comgrow black PETG

Checks for this spool.

Check before you buy

  • Your Comgrow black PETG prints are functional parts, not showpieces
  • Your hotend reaches the 235-240°C Comgrow lists
  • Your bed holds 70°C for Comgrow PETG

The product at a glance

Comgrow Black PETG 1KG

Best for: Functional parts on a budget

Material Type
PETG
Filament Diameter
1.75mm
Net Weight
1KG
Dimensional Accuracy
+/- 0.02 mm
Features
High Precision
Color
Black

View on Amazon: Comgrow Black PETG 1KG Affiliate link

Comgrow PETG, black 1kg: a budget 1.75mm PETG for brackets and printer parts, with listed settings of 235-240°C, 70°C bed and 30mm/s.

Pros

  • Clear starting settings on the page
  • Tough enough for clips and brackets
  • Tight ±0.02mm diameter

Cons

  • 30mm/s baseline is slow
  • Spec weight field says 1 lb
  • PETG strings without tuning

Good fit if

  • You print brackets and printer upgrades

Skip if

  • You want high-speed PETG for 300mm/s+

Verdict: A dependable black PETG for functional prints.

Specifications side by side

Spec Comgrow Black PETG 1KG
Material Type PETG
Filament Diameter 1.75mm
Net Weight 1KG
Dimensional Accuracy +/- 0.02 mm
Compatible Material PETG
Features High Precision
Color Black
Size 1KG
Resin Type Tough
Weight 1 pounds
Model ZSPETGBKNEW1

Frequently asked questions

What temperature does Comgrow black PETG print at?

Comgrow lists 235-240°C for the nozzle and 70°C for the bed.

How fast can Comgrow black PETG print?

The listing recommends 30mm/s; it makes no high-speed claim.

What is Comgrow black PETG good for?

Mechanical parts, holders, clamps and 3D printer parts, per Comgrow.

Does Comgrow black PETG arrive dry?

Comgrow says it is dried and vacuum sealed before shipping.

See also