Comgrow PLA Filament Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Comgrow PLA in white is a budget everyday filament: $14.99 buys 1kg of 1.75mm PLA, with diameter held within ±0.02mm. Comgrow suggests a 210-220°C nozzle, claims low shrinkage with good toughness and layer bonding, and packs each spool vacuum sealed with desiccant after machine winding to limit tangles. That makes it a sensible default for prototypes, household parts and practice prints on any common 1.75mm FDM printer. We took these details from the listing and have not printed with it.
What stands out
- $14.99 per 1kg spool
- ±0.02mm diameter tolerance
- 210-220°C nozzle guidance
- Vacuum sealed with desiccant
Who it fits
Good fit for
Anyone burning through test prints, brackets, organizers and models who wants a cheap white spool with a stated tolerance and a nozzle range to start from.
Who should skip it
Pass on it when a part sits near heat or has to flex, or when a silk or matte look is the point.
Verdict: A no-frills white PLA that covers everyday printing at a low price.
Comgrow PLA specs explained
1.75mm ±0.02mm
A tight diameter range helps steady extrusion; Comgrow credits a self-adaptive control system in production.
Nozzle 210-220°C
The only print setting listed; no bed temperature is given.
Vacuum sealed with desiccant
Blocks damp air until opened, which Comgrow links to fewer clogs and bubbles.
1kg, model ZSWTPLA
A full spool; the model code helps when reordering the same white.
Material and spool
Comgrow describes this PLA as tougher than usual with low shrinkage, aimed at functional prints as well as models. Winding is done by machine for tidy layers on the spool, and Comgrow also recommends threading the free end into the hole on the spool rim after every job to stop it unwinding.
Printing with it
Start at 210°C and move toward 220°C if layers look weak or the surface is dull. Since bed temperature is not listed, use your printer's usual PLA bed setting. Clip the end into the spool hole between jobs and keep the spool bagged if your room is humid.
Before you buy this PLA
It is a plain white spool, so check it suits the job.
Check before you buy
- Your printer uses 1.75mm filament
- White PLA fits the part
- Parts will stay away from hot places
- You will set the bed temperature yourself
The product at a glance
Comgrow 1KG White PLA Filament
Best for: Everyday prototypes and practice prints
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- +/- 0.02mm
- Color
- White
- Weight
- 2.2 pounds
View on Amazon: Comgrow 1KG White PLA Filament Affiliate link
Comgrow's white PLA costs $14.99 per kilo of 1.75mm filament, quotes ±0.02mm tolerance, a 210-220°C nozzle range and vacuum-sealed packing, made for everyday printing.
Pros
- Low price per kilo
- Stated tolerance and nozzle range
- Moisture-sealed packaging
Cons
- No bed temperature listed
- Standard PLA heat limits
- Plain white only in this listing
Good fit if
- You print lots of prototypes
- You want a cheap reliable default spool
Skip if
- You need heat-resistant parts
- The look matters more than cost
Verdict: A cheap, well-documented everyday PLA.
Specifications side by side
| Spec | Comgrow 1KG White PLA Filament |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | +/- 0.02mm |
| Compatible Material | PLA |
| Color | White |
| Size | 1KG |
| Weight | 2.2 pounds |
| Model | ZSWTPLA |
When you organize your filament storage, see the dymo label printer review for dedicated labeling specifications.
Frequently asked questions
What nozzle temperature does Comgrow suggest?
210-220°C.
How accurate is the diameter?
±0.02mm on 1.75mm, according to the listing.
Is the spool dry when it arrives?
Yes, it ships in a vacuum bag with a desiccant pack.
Which printers can use it?
Comgrow says all common 1.75mm FDM printers.
