Comgrow Silk Tri-Color PLA Filament Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Comgrow's Silk Shiny tri-color PLA is coextruded, so every section of the strand carries three colors side by side rather than changing color along the spool like rainbow filament. Prints come out glossy with the colors shifting as you turn the model, which suits vases, ornaments and craft pieces. A 1kg spool of 1.75mm costs $17.99, and Comgrow gives full settings: 200-220°C nozzle, 50-60°C bed and 40-70mm/s. Two listing details disagree, noted below. Our take relies on Comgrow's listing alone; we have not printed a spool.
What stands out
- Three colors in one strand
- Glossy silk surface
- Full print settings listed
- Paper spool and box
Who it fits
Good fit for
Makers of decorative pieces, gifts and art prints who want a multi-tone silk effect from a single-nozzle printer.
Who should skip it
Skip it if you need exact colors, since the listing disagrees on which three are used, or if the parts are functional rather than decorative.
Verdict: An eye-catching silk PLA for display prints, as long as you accept some doubt over the exact colors.
Silk tri-color specs explained
Coextruded tri-color silk PLA
Each part of the filament holds three colors, giving a shifting multi-tone look on curved surfaces.
Nozzle 200-220°C, bed 50-60°C, 40-70mm/s
Comgrow's suggested range; slower speeds usually bring out silk shine.
1.75mm, 1kg
Standard diameter and full spool weight.
Tolerance ±0.02mm or ±0.03mm
The title and the feature text give different figures.
Colors and conflicts
The product title names blue, purple and yellow, but the feature text says red, blue and yellow, so the exact mix is unclear; compare the product photos or contact Comgrow before ordering for a set palette. The title also states ±0.02mm while the features say ±0.03mm. Comgrow uses a paper spool and paper box, with the filament vacuum packed alongside desiccant.
Getting the effect
Begin around 210°C with the bed at 55°C and a speed near the low end of 40-70mm/s. Designs with smooth curves, such as vases and spheres, show the three-tone effect best, while flat faces tend to reveal fewer of the tones at once. Reseal leftover filament with its desiccant between projects.
Before you buy tri-color silk
Go in knowing the color mix is not firmly stated.
Check before you buy
- The print is decorative
- You are fine with uncertain color names
- Your printer takes 1.75mm filament
- Your spool holder works with a paper spool
The product at a glance
Comgrow Silk PLA Tri-Color 1.75mm
Best for: Multi-tone decorative prints
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Max Print Speed
- 70mm/s
- Dimensional Accuracy
- +/- 0.03mm
- Surface Finish
- Silk
View on Amazon: Comgrow Silk PLA Tri-Color 1.75mm Affiliate link
Comgrow tri-color silk PLA is a 1kg, 1.75mm coextruded filament with three colors per strand and a glossy finish, sold at $17.99 with full print settings listed.
Pros
- Shifting three-tone silk look
- Nozzle, bed and speed settings given
- Paper packaging
Cons
- Color names conflict in the listing
- Tolerance figure differs between title and text
- Decorative use only
Good fit if
- You print vases and ornaments
- You want multi-color looks on one nozzle
Skip if
- You need a specific color match
- You print load-bearing parts
Verdict: A striking silk filament for curved display prints.
Specifications side by side
| Spec | Comgrow Silk PLA Tri-Color 1.75mm |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Max Print Speed | 70mm/s |
| Dimensional Accuracy | +/- 0.03mm |
| Surface Finish | Silk |
| Compatible Material | PLA |
| Finish | Silk |
| Weight | 2.2 pounds |
| Size | Silk PLA |
| Color | Blue & Purple &Yellow |
| Model | Blue & Purple &Yellow |
If you want bedding data instead of workshop tools, the purple mattress review details foam layers and support dimensions.
Frequently asked questions
Which three colors are in it?
The title says blue, purple and yellow; the features say red, blue and yellow.
Is it the same as rainbow filament?
No. Rainbow changes color along its length; this has three colors across the strand.
What settings does Comgrow suggest?
200-220°C nozzle, 50-60°C bed, 40-70mm/s.
What spool does it use?
A paper spool in a paper box.
