ELEGOO PLA Filament (Neon Green, 1kg) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO's standard PLA in Neon Green is the brand's basic 1kg spool in its loudest color, and the color is the main reason to pick it: a high-visibility green that suits toys, signage, cable clips you want to spot, and kids' projects. Underneath, it is ELEGOO's everyday PLA, sold on low warp and shrinkage, low print temperature, no odor while printing and a glossy finish. Diameter is 1.75mm with ±0.02mm accuracy, the spool is dried and vacuum sealed, and ELEGOO names Neptune, Bambu Lab P1P and P1S, Ender and Kobra printers as compatible. This is plain PLA, not PLA+, so it is stiff rather than tough. The page gives no temperature range or speed rating. This write-up is built on ELEGOO's own listing, not on a test print.
What stands out
- Bright Neon Green color
- Low warp, odorless printing
- 1.75mm ±0.02mm
- Dried and vacuum sealed
Who it fits
Good fit for
Beginners, parents and makers who want an easy, glossy PLA in a color that stands out for toys, signs and markers.
Who should skip it
Anyone printing parts that take knocks; ELEGOO's PLA+ is the tougher choice.
Verdict: An easy, bright beginner PLA; buy it for the color and simple printing.
ELEGOO Neon Green PLA at a glance
Standard PLA
Easy to print; stiff, not tough.
1.75mm ±0.02mm
Even feeding on common FDM printers.
1kg (2.2 lb) spool
A full spool for a run of colored parts.
Model MX-EL-3DF-PB0440
ELEGOO's code for this Neon Green spool.
No temperatures listed
Use your printer's PLA preset.
What Neon Green is good for
Bright neon colors stand out on desks and shelves, which helps for game pieces, safety tags and kids' prints. ELEGOO credits the glossy surface to strong layer adhesion and low shrinkage. The spec field gives the size as 0.068 inch, which is just 1.75mm in inches, not a spool size.
Printing ELEGOO Neon Green PLA
ELEGOO stresses a lower printing temperature than other materials, so a stock PLA preset is the right start. A neat winding cuts tangles. Bright colors can look slightly different in thin walls versus thick, so check a sample part if exact shade matters.
Before buying ELEGOO Neon Green PLA
Quick checks.
Check before you buy
- You want ELEGOO plain PLA, not PLA+, for bright display parts
- Your printer takes ELEGOO 1.75mm spools
- A preset PLA profile works for your ELEGOO prints
The product at a glance
ELEGOO 1.75mm PLA Filament (1kg, Neon Green)
Best for: Bright beginner prints
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- +/- 0.02mm
- Surface Finish
- Glossy
- Printing Technology
- FDM
View on Amazon: ELEGOO 1.75mm PLA Filament (1kg, Neon Green) Affiliate link
ELEGOO PLA, Neon Green 1kg: the brand's standard 1.75mm PLA in a bright neon, with low warp, no odor and a glossy finish.
Pros
- Eye-catching neon color
- Easy, low-warp printing
- Glossy surface
Cons
- Plain PLA is brittle under impact
- No temperature range on the page
- Size field shows 0.068 inch
Good fit if
- You print toys, signs or kids' projects
Skip if
- Your parts need impact strength
Verdict: A cheerful, easy spool for bright prints.
Specifications side by side
| Spec | ELEGOO 1.75mm PLA Filament (1kg, Neon Green) |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | +/- 0.02mm |
| Surface Finish | Glossy |
| Printing Technology | FDM |
| Compatible Material | PLA |
| Weight | 2.2 pounds |
| Size | 0.068 Inch |
| Color | Neon Green |
| Model | MX-EL-3DF-PB0440 |
Frequently asked questions
Is ELEGOO Neon Green PLA good for beginners?
Yes, ELEGOO calls it easy to use and set up, with low warp.
Which printers fit ELEGOO Neon Green PLA?
ELEGOO names Neptune, Bambu Lab P1P/P1S, Ender and Kobra printers among common 1.75mm machines.
Does ELEGOO standard PLA smell when printing?
ELEGOO describes it as odorless during printing.
Is this ELEGOO spool PLA or PLA+?
Standard PLA; ELEGOO sells PLA+ separately for tougher parts.
See also
- elegoo pla plus black 1kg filament review
- elegoo abs like 3 0 resin 2000g review
- creality ender 3 v3 plus hotend adapter board review
- elegoo pla filament review
- elegoo pla plus filament review
- ELEGOO Matte PLA Filament 1.75mm Review: Who It Fits and Who Should Skip It
- ELEGOO Rapid PETG Filament 1.75mm Review (2026): A Spec-Based Look
- ELEGOO 1.75mm Black PETG Filament Review: Who It Fits and Who Should Skip It
- voigtlander voigtlander nokton 75mm f 1 5 review
- viltrox 75mm f 1 2 f1 2 pro review
