Comgrow PLA Filament Blue 1kg Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Comgrow's blue PLA is a budget everyday spool: 1kg of 1.75mm filament at ±0.02mm, vacuum sealed with desiccant, sold as a plain workhorse for functional prints and general projects. Blue suits parts you want to color-code, such as drawer organizers, cable clips, tool holders and kids' projects, without paying for silk or matte finishes. Comgrow gives a nozzle range of 210-220°C, a little warmer and narrower than many PLA spools, and claims low shrinkage, good layer adhesion and extra toughness without test numbers. It lists no bed temperature or speed, so use your printer's standard PLA bed setting. Comgrow asks you to feed the loose end through the spool's fixing hole after each print to prevent tangles. Model code PLABUV1 identifies the blue color in Comgrow's PLA line, which also comes in white and other colors. This review draws on Comgrow's listing.
What stands out
- 1kg blue PLA, 1.75mm ±0.02mm
- 210-220°C nozzle
- Vacuum sealed with desiccant
- No bed temp or speed listed
Who it fits
Good fit for
Hobbyists who want a low-cost blue PLA for organizers, clips, labels and everyday functional parts.
Who should skip it
Anyone who needs a high-speed PLA rated for fast printers, or full print settings on the listing.
Verdict: A plain, cheap blue PLA spool for everyday prints.
Comgrow blue PLA specs
1.75mm ±0.02mm
Tight diameter for steady extrusion.
210-220°C
Narrow, slightly warm PLA nozzle range.
1kg net
Standard spool size.
Vacuum + desiccant
Arrives dry.
Bed / speed
Not listed; use standard PLA settings.
What you get with Comgrow PLA
Comgrow says its manufacturing uses self-adaptive diameter control for the ±0.02mm tolerance and mechanical winding for neat layers on the spool. The formula is pitched as tougher than basic PLA with low shrinkage, aimed at functional prints, though no strength figures are given.
Printing Comgrow blue PLA
Start at 215°C, the middle of Comgrow's 210-220°C range, and use the bed temperature you normally run for PLA. Store the opened Comgrow spool back in its bag with the desiccant between prints. Thread the end through the fixing hole after each job, as Comgrow advises.
Before buying Comgrow blue PLA
Checks.
Check before you buy
- Your printer runs PLA at 210-220°C for Comgrow blue
- You are fine without a Comgrow bed or speed figure
- Blue suits your Comgrow PLA parts
The product at a glance
Comgrow Blue PLA 1.75mm 1KG
Best for: Everyday color-coded parts
- Material Type
- PLA
- Filament Diameter
- 1.75 mm
- Net Weight
- 1 kg
- Dimensional Accuracy
- +/- 0.02mm
- Color
- Blue
- Size
- 1KG
View on Amazon: Comgrow Blue PLA 1.75mm 1KG Affiliate link
Comgrow PLA, blue, 1kg, 1.75mm ±0.02mm, 210-220°C nozzle, vacuum sealed with desiccant; model PLABUV1, no bed or speed data.
Pros
- Budget price
- Tight ±0.02mm tolerance
- Arrives vacuum sealed
Cons
- No bed temp or speed
- Narrow 210-220°C window
- Toughness claims unmeasured
Good fit if
- You want cheap blue PLA for everyday parts
Skip if
- You run a fast printer needing high-speed PLA
Verdict: An inexpensive everyday blue PLA.
Specifications side by side
| Spec | Comgrow Blue PLA 1.75mm 1KG |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75 mm |
| Net Weight | 1 kg |
| Dimensional Accuracy | +/- 0.02mm |
| Compatible Material | PLA |
| Color | Blue |
| Size | 1KG |
| Weight | 2.2 pounds |
| Model | PLABUV1 |
Frequently asked questions
What nozzle temperature does Comgrow list for blue PLA?
About 210-220°C.
What tolerance does Comgrow give for its blue PLA?
1.75mm ±0.02mm.
Does Comgrow list a bed temperature for this PLA?
No; use your printer's usual PLA bed setting.
Is Comgrow blue PLA a high-speed filament?
The listing makes no speed claim, so treat it as standard PLA.
See also
- voxelab luminous hs glow pla filament review
- chitu systems conjure sculpt grey resin 1kg review
- creality hyper abs filament review
- comgrow pla filament review
- comgrow silk tri color pla filament review
- Comgrow White PETG Filament Review (2026): A Spec-Based Look
- Comgrow Black PETG Filament 1kg Review (2026)
- Comgrow Brown PETG Filament (1.75mm, 1kg) Review
- greenlife 1 5qt blue haze rice review
- jonscook 7 in 1 blue mandoline slicer review
