As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Creality Hyper PLA RFID Filament (Black, 1kg) Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Creality Hyper PLA RFID is the tagged version of Creality's high-speed PLA, and the tag is the reason to buy this black 1kg spool rather than the plain Hyper PLA. When it sits in a Creality Filament System (CFS), the printer reads the chip and sets temperature, flow and speed on its own, which saves a step on every color change for K2 Plus Combo, K2 Pro and Hi Combo owners. Creality rates it for clean extrusion up to 600mm/s and claims more toughness than standard PLA plus better impact resistance than ABS, aimed at working prototypes as well as models. On printers without a CFS, it prints as ordinary high-speed PLA; you just enter settings by hand. The page lists no temperature range, since the RFID tag is meant to supply it. This verdict leans on Creality's listing and specs; no spool went through our printers.

What stands out

  • RFID tag read by the CFS for auto settings
  • Rated up to 600mm/s
  • Tougher than standard PLA, per Creality
  • Tangle-free winding

Who it fits

Good fit for

K2 Plus Combo, K2 Pro and Hi Combo owners who run a CFS and want black PLA that sets itself up.

Who should skip it

Owners of non-Creality printers who never use the RFID tag; the plain Hyper PLA does the same job.

Verdict: The natural black spool for a CFS-equipped Creality; elsewhere the tag adds nothing.

Creality Hyper PLA RFID black, decoded

RFID tag

CFS reads it and loads temperature, flow and speed.

Up to 600mm/s

Matches the speed of Creality's K2 series.

1.75mm, 1kg

Standard size for any 1.75mm printer.

Model 'Hyper PLA RFID'

Distinct from untagged Hyper PLA spools.

No temperatures listed

Off-CFS users need their own profile.

Why the RFID tag matters

In a four-slot CFS, every spool swap normally means picking the material and color in the slicer. With a tagged spool the printer knows what it has, which cuts mismatched-profile failures. Creality names the K2 Plus Combo, K2 Pro and Hi Combo; it also says Hyper PLA works on most high-speed printers from other brands, without the auto-setup.

Running Hyper PLA RFID black

On a CFS machine, load the spool and let the tag set the profile. Elsewhere, start from your printer's generic high-speed PLA settings and adjust from a test print. Black hides layer lines well, which suits fast prints where surface finish is less even.

Before buying Creality Hyper PLA RFID

Checks for this tagged spool.

Check before you buy

  • Your Creality printer has a CFS that reads Hyper PLA RFID tags
  • You print fast enough to use Creality's 600mm/s rating
  • You accept that the Hyper PLA RFID page lists no temperatures

The product at a glance

Creality Hyper PLA 1.75mm High-Speed Filament

Best for: CFS-equipped Creality printers

Material Type
PLA
Filament Diameter
1.75mm
Net Weight
1KG
Max Print Speed
600 mm/s
Features
High Speed
Resin Type
Tough

View on Amazon: Creality Hyper PLA 1.75mm High-Speed Filament Affiliate link

Creality Hyper PLA RFID, black 1kg: high-speed PLA rated to 600mm/s with an RFID tag that lets the CFS load temperature, flow and speed automatically.

Pros

  • Auto settings on CFS printers
  • 600mm/s rating
  • Creality claims more toughness than plain PLA

Cons

  • Tag is useless without a CFS
  • No temperature range listed
  • Impact claim vs ABS unquantified

Good fit if

  • You run a K2 or Hi Combo with CFS

Skip if

  • You own no Creality CFS unit

Verdict: Buy it for the CFS; skip it if you have none.

Specifications side by side

Spec Creality Hyper PLA 1.75mm High-Speed Filament
Material Type PLA
Filament Diameter 1.75mm
Net Weight 1KG
Max Print Speed 600 mm/s
Compatible Material PLA
Print Speed 600mm/s
Features High Speed
Resin Type Tough
Dimensions 8.27 × 2.76 × 8.27 inches
Weight 2.2 pounds
Size Pla Rfid
Color Rfid-black
Model Hyper PLA RFID

Frequently asked questions

Can the black Hyper PLA RFID spool print on a printer with no CFS?

Yes, it prints as normal high-speed PLA; you set the profile yourself.

Which printers read the Hyper PLA RFID tag?

Creality names the K2 Plus Combo, K2 Pro and Hi Combo with the CFS.

How fast can Creality Hyper PLA RFID print?

Creality rates it for stable extrusion up to 600mm/s.

What temperature does Hyper PLA RFID black use?

The listing gives none; the RFID tag supplies settings on a CFS.

See also