As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Comgrow White PETG Filament Review (2026): A Spec-Based Look

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Comgrow white PETG is a low-cost choice for parts that must handle knocks: holders, clamps, brackets and printer parts. Comgrow pitches it as combining PLA's ease with ABS-like durability and impact resistance, with strong layer bonding and little warping. The 1.75mm strand is held to ±0.02mm, dried for 24 hours and shipped in a resealable foil bag, and the listing gives clear settings: 235-240°C nozzle, 70°C bed, 30mm/s. It costs $13.99. One catch: the spool weight is listed three different ways. Everything here is taken from Comgrow's product page.

What stands out

  • Impact-resistant PETG
  • Full print settings listed
  • Dried 24 hours, resealable foil bag
  • ±0.02mm diameter

Who it fits

Good fit for

Anyone printing functional parts like clips, mounts and spare printer pieces who wants a tougher material than PLA without the fumes and enclosure demands of ABS.

Who should skip it

Skip it if you want fast printing out of the box, since Comgrow recommends only 30mm/s, or if an uncertain spool weight bothers you.

Verdict: A cheap, well-documented PETG for sturdy everyday parts, with a confusing weight listing.

PETG specs, explained

Nozzle 235-240°C, bed 70°C

Typical PETG heat; most open printers with a heated bed can manage it.

30mm/s recommended

A conservative speed; many printers run PETG faster, but this is Comgrow's figure.

1.75mm ±0.02mm

Consistent diameter for steady feeding.

Weight: 1KG, 2LBS or 1 pound

The size field says 1KG, the title says 2LBS and the spec weight says 1 pound.

Material and packaging

PETG sits between PLA and ABS: tougher and more heat-tolerant than PLA, easier to print than ABS. Comgrow adds a clog-free formula claim and says every spool is dried for a day before going into a resealable foil bag, which helps if you print a spool over several weeks. The weight conflict is worth noting: the size field reads 1KG, the title 2LBS (about 0.9kg) and the spec sheet 1 pound.

Printing PETG

Use 235-240°C at the nozzle and 70°C on the bed, starting at Comgrow's 30mm/s and raising speed only once prints look clean. PETG can stick hard to smooth PEI and glass, so a textured plate or a release agent can save your surface. Reseal the foil bag between jobs.

Before you buy this PETG

Check settings and your bed surface.

Check before you buy

  • Your hotend reaches 240°C
  • Your bed reaches 70°C
  • You are printing functional parts
  • You accept the unclear spool weight

The product at a glance

Comgrow 1KG White 1.75mm PETG Filament

Best for: Durable functional parts

Material Type
PETG
Filament Diameter
1.75mm
Net Weight
1KG
Dimensional Accuracy
+/- 0.02 mm
Features
High Precision
Color
White

View on Amazon: Comgrow 1KG White 1.75mm PETG Filament Affiliate link

Comgrow white PETG is a $13.99, 1.75mm ±0.02mm filament for tough parts, with listed settings of 235-240°C, a 70°C bed and 30mm/s, though its spool weight is listed inconsistently.

Pros

  • Tougher than PLA
  • Clear nozzle, bed and speed settings
  • Resealable foil packaging

Cons

  • Spool weight listed three ways
  • Slow recommended speed
  • White only in this listing

Good fit if

  • You print brackets, clamps or holders
  • A 70°C bed is within reach

Skip if

  • You need a confirmed 1kg spool
  • You want high-speed PETG

Verdict: Good-value PETG for functional parts, if the weight question does not bother you.

Specifications side by side

Spec Comgrow 1KG White 1.75mm PETG Filament
Material Type PETG
Filament Diameter 1.75mm
Net Weight 1KG
Dimensional Accuracy +/- 0.02 mm
Compatible Material PETG
Features High Precision
Color White
Size 1KG
Resin Type Tough
Weight 1 pounds
Model ZSPETGWT1

Frequently asked questions

What settings does Comgrow give?

235-240°C nozzle, 70°C bed and 30mm/s.

What does a spool weigh?

Unclear: the listing says 1KG, 2LBS and 1 pound in different places.

Is it dried before shipping?

Yes, for 24 hours, then packed in resealable foil.

What is it good for?

Mechanical parts, holders, clamps and printer parts, per Comgrow.

See also