ANYCUBIC Photon P1 Heated Resin Vat Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Switching resin colors in one vat means pouring, filtering and cleaning every time. A second vat lets you lift one out and drop the other in. This is ANYCUBIC's spare vat for the Photon P1, with an NFEP release film already fitted. ANYCUBIC says it works with the P1's dynamic temperature control to hold resin at its printing temperature, and the tank has a maximum fill mark to stop overflow. The listing gives no capacity, dimensions or film size, so treat it as a P1-only part. Information here comes from ANYCUBIC's listing.
What stands out
- Made for the Photon P1
- NFEP film pre-installed
- Works with P1 temperature control
Who it fits
Good fit for
Photon P1 owners who swap between resins or colors often and want a ready second vat.
Who should skip it
Owners of other Photon models, and anyone needing a stated capacity before buying.
Verdict: A convenient second vat for P1 owners who change resins often.
Photon P1 resin vat specs
Photon P1
Listed fit.
NFEP film fitted
Ready to fill.
Temperature control
Works with the P1.
Max fill mark
Prevents overflow.
Capacity
Not stated.
Why a heated vat matters on the P1
Resin thickens when cool, which slows flow under the plate and weakens first layers. The P1 controls resin temperature through the vat, and this spare is built to take part in that, so a swapped-in vat behaves the same as the original. The NFEP film arrives fitted, which saves the fiddly job of tensioning a new film before first use.
Using a second vat
Keep one vat for your main resin and the other for a color or specialty resin, and store the idle one covered and away from light. Do not fill past the mark. Choose this vat if you swap resins weekly; skip it if you print one resin and only need a new film.
Before you order
Checks for the Photon P1 heated resin vat.
Check before you buy
- Your printer is the Photon P1
- You change resins or colors often
- You can store a filled vat away from light
- You do not need a stated capacity
The product at a glance
ANYCUBIC Photon P1 Heated Resin Vat
Best for: Photon P1 resin swaps
- Release Film Type
- NFEP
- Printing Technology
- Resin
View on Amazon: ANYCUBIC Photon P1 Heated Resin Vat Affiliate link
ANYCUBIC Photon P1 spare vat: NFEP film pre-installed, works with the P1's temperature control, max fill mark; no capacity stated.
Pros
- Ready to use
- Keeps P1 temperature control
- Fast resin swaps
Cons
- No capacity or size listed
- P1 only
Good fit if
- You switch resins on a P1
- You want a backup vat
Skip if
- You print one resin only
Verdict: A handy second vat for busy P1 users.
Specifications side by side
| Spec | ANYCUBIC Photon P1 Heated Resin Vat |
|---|---|
| Release Film Type | NFEP |
| Printing Technology | Resin |
Frequently asked questions
Does the Photon P1 vat come with film installed?
Yes, an NFEP release film is pre-installed.
Does the spare P1 vat heat resin?
ANYCUBIC says it works with the P1's dynamic temperature control.
How much resin does the Photon P1 vat hold?
The listing does not state a capacity; it has a max fill mark.
Will the P1 resin vat fit other Photon printers?
It is listed for the Photon P1 only.
Why buy a second Photon P1 vat?
To switch resin colors quickly without emptying and cleaning one vat.
Featured in
See also
- anycubic photon mono 4 build platform review
- anycubic photon mono m7 build platform review
- anycubic photon p1 dual color kit review
- anycubic 5pcs 10 1 inch acf high review
- anycubic kobra 3 v2 replacement printhead review
- ANYCUBIC Kobra 3 Max Printhead Assembly Review (2026): A Spec-Based Look
- ANYCUBIC FEP Film 2-Pack for Photon Mono 2 and Mono 4 Review: Specs, Pros and Cons
- ANYCUBIC Kobra 3 USB Monitoring Camera Review: Who It Fits and Who Should Skip It
- anycubic photon p1 14k resin 3d printer review
- noctua nh p1 review
