ANYCUBIC Kobra 3 USB Monitoring Camera Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ANYCUBIC's Kobra 3 camera (part S010215) is a small USB camera that plugs into the printer and streams to the Anycubic app, so you can check a print from another room or away from home and catch spaghetti or a lifted corner early. The listing names the Kobra 3, Kobra 3 Combo, Kobra 3 Max, Kobra 3 Max Combo and the Kobra 2 series, and says it also works with Klipper printers and a computer. The frame around the lens is replaceable, so you can print your own. ANYCUBIC calls the picture ultra clear but gives no resolution. It costs about $22 and showed low stock at our check. We have not mounted one; the facts here are ANYCUBIC's.
What stands out
- Remote view in the Anycubic app
- Fits Kobra 3, 3 Max and Kobra 2
- Plug-in USB, minutes to fit
- Printable custom frame
Who it fits
Good fit for
Kobra 3 and Kobra 3 Max owners (with or without the Combo) who run long prints and want to check progress from a phone, and Kobra 2 owners who want app monitoring.
Who should skip it
Buyers who need a stated resolution, night vision or AI failure detection: the listing claims none of these. Owners of printers outside the named list should confirm app support first.
Verdict: A cheap, simple way to add remote viewing to a Kobra 3 or Kobra 2.
What the listing covers
USB connection
Plugs into the printer's USB port; no separate power supply mentioned.
Anycubic app
Live view and progress monitoring away from the printer.
Kobra 3 / 3 Max / Kobra 2
The named printers; Klipper and PC use are also mentioned.
Resolution
Called ultra clear, with no pixel count or frame rate given.
Design and support
The camera body sits in a swappable frame you can redesign and print. ANYCUBIC says each unit is tested before shipping and offers 3 months of after-sale product service, lifetime technical support, 24/7 customer service and installation videos.
Setting it up
Connect the camera to the USB port, seat it in its mount on the printer, and add it in the Anycubic app. Position it so the full bed is in frame; check the view once before trusting it on an overnight print.
Before buying
Checks.
Check before you buy
- Your printer is a Kobra 3, 3 Max or Kobra 2
- You use the Anycubic app
- You do not need night vision
- You accept a possible low-stock wait
The product at a glance
ANYCUBIC Kobra USB Monitoring Camera
Best for: Kobra 3 remote monitoring
- Features
- Built-in Camera
- Color
- Black
View on Amazon: ANYCUBIC Kobra USB Monitoring Camera Affiliate link
ANYCUBIC USB camera S010215 for Kobra 3, Kobra 3 Combo, Kobra 3 Max/Max Combo and Kobra 2 series: remote monitoring in the Anycubic app, swappable printable frame.
Pros
- Easy USB install
- App remote viewing
- Low price
Cons
- No resolution stated
- Low stock at our check
Good fit if
- You leave a Kobra 3 printing overnight
- You want phone check-ins
Skip if
- You need night vision
- Your printer is not on the list
Verdict: A low-cost remote eye for Kobra printers.
Specifications side by side
| Spec | ANYCUBIC Kobra USB Monitoring Camera |
|---|---|
| Features | Built-in Camera |
| Color | Black |
| Model | S010215 |
Frequently asked questions
Does the ANYCUBIC camera fit the Kobra 3 Max?
Yes, the Kobra 3 Max and Kobra 3 Max Combo are both listed.
What resolution is the ANYCUBIC Kobra 3 camera?
The listing calls it ultra clear but gives no resolution.
Can I use the Kobra 3 camera with Klipper?
ANYCUBIC says it is compatible with Klipper printers and a computer.
Does the ANYCUBIC S010215 camera need tools to install?
No, it connects by USB and slots into the printer in a few minutes.
See also
- phrozen wash cure kit review
- phrozen hands free 3d resin mixer review
- phrozen 16k upgrade kit sonic review
- anycubic 5pcs 10 1 inch acf high review
- anycubic kobra 3 v2 replacement printhead review
- ANYCUBIC Kobra 3 Max Printhead Assembly Review (2026): A Spec-Based Look
- ANYCUBIC FEP Film 2-Pack for Photon Mono 2 and Mono 4 Review: Specs, Pros and Cons
- ANYCUBIC 4-in-1 Filament Hub for Kobra Review (2026)
- anycubic kobra 3 max v2 3d printer review
- unxuey 50pcs 3d printer heatsink review
