ANYCUBIC Photon P1 Dual-Color Kit Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Owners of a plain Photon P1 who want two colors or two resins in a single job are the people this kit is made for. ANYCUBIC's Dual-Color/Dual-Material Print Kit contains two resin vats with release films already fitted, plus two printing platforms, and it is listed for the Photon P1 only. The point is to load two different resins at once instead of draining and cleaning one vat to change material. Each vat carries a maximum fill mark, and ANYCUBIC repeats the warning not to fill past it. The kit page gives no vat volume, platform size or weight, and it does not explain how a model is split between the two resins in the slicer; that lives in ANYCUBIC's P1 software, not in this listing. Everything here is taken from ANYCUBIC's kit page.
What stands out
- Two vats with release films fitted
- Two build platforms included
- Made for the Photon P1 only
Who it fits
Good fit for
Photon P1 owners who switch between two resins often, or want two colors or materials in one print without buying the dual-color printer bundle.
Who should skip it
Owners of any other Photon model, and anyone who wants the vat volume and platform size in writing before buying.
Verdict: A sensible add-on for a P1 that already prints well; check the dual-material workflow in ANYCUBIC's software first.
Photon P1 dual kit contents
2 resin vats
Release films pre-installed.
2 build platforms
One per vat.
Max fill mark on each vat
Do not overfill.
Photon P1 only
No other printers listed.
Vat volume
Not stated.
Platform size
Not stated.
Why two vats instead of one
Changing resin on a single-vat printer means pouring the old resin back, cleaning the vat and the platform, and refilling. With a second vat and platform ready, the second resin stays loaded. ANYCUBIC also says the kit lets the P1 print two colors or two materials at the same time, which is the main reason to buy it over a simple spare vat. Fitted films save one setup step, though you still need to level each platform.
Using the kit
Fill each vat only to its mark, fit the matching platform and set up the dual job in ANYCUBIC's P1 software. Choose this kit if you already own the P1 and want two-resin jobs; choose the P1 bundle sold with the dual-color platform if you have not bought the printer yet, since that comes ready from the box.
Before you order
Checks for the ANYCUBIC Photon P1 dual kit.
Check before you buy
- Your printer is a Photon P1
- Your P1 software supports dual-material jobs
- You keep two resins on hand
- You have space to store a second vat
The product at a glance
ANYCUBIC Photon P1 Dual-Color Print Kit
Best for: Photon P1 owners
- Color Effect
- Dual Color
View on Amazon: ANYCUBIC Photon P1 Dual-Color Print Kit Affiliate link
ANYCUBIC Photon P1 dual kit: two vats with films fitted and two platforms for two-color or two-material prints; no vat volume or platform size listed.
Pros
- Saves resin changeovers
- Films already fitted
- Two-material jobs on a plain P1
Cons
- Photon P1 only
- Sparse kit page
Good fit if
- You own a Photon P1
- You often switch between two resins
Skip if
- You own another Photon model
Verdict: A useful add-on for a P1 that runs two resins.
Specifications side by side
| Spec | ANYCUBIC Photon P1 Dual-Color Print Kit |
|---|---|
| Color Effect | Dual Color |
Frequently asked questions
Does the ANYCUBIC dual kit fit printers other than the Photon P1?
The listing names the Photon P1 only.
What is inside the ANYCUBIC P1 dual-color kit box?
Two resin vats with release films fitted and two printing platforms.
Can the P1 dual kit print two materials in one job?
ANYCUBIC says it prints two colors or two materials at the same time.
How much resin does each P1 dual kit vat hold?
The kit page gives no volume; each vat has a maximum fill mark.
Are the release films already installed on the P1 vats?
Yes, both vats ship with films fitted.
Featured in
See also
- phrozen cure mega s curing station review
- phrozen 15 inch build platform sonic mega 8k review
- phrozen 15 inch build plate sonic mega 8k s review
- anycubic 5pcs 10 1 inch acf high review
- anycubic kobra 3 v2 replacement printhead review
- ANYCUBIC Kobra 3 Max Printhead Assembly Review (2026): A Spec-Based Look
- ANYCUBIC FEP Film 2-Pack for Photon Mono 2 and Mono 4 Review: Specs, Pros and Cons
- ANYCUBIC Kobra 3 USB Monitoring Camera Review: Who It Fits and Who Should Skip It
- anycubic photon p1 dual material resin review
- koveyzao atomstack p1 dual laser engraver review
