ANYCUBIC Photon Mono M7 / M7 Pro Build Platform Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ANYCUBIC sells the Photon Mono M7 and M7 Pro platform on its own (model USS020226-0427), in black. It is the part prints hang from, and it wears out through scraping, drops and bent mounts. The listing names both the M7 and the M7 Pro, which is useful since one plate serves both printers, but it gives no dimensions, surface finish or weight. Treat it as a direct replacement for a damaged original, or a second plate to rotate while one is being cleaned. The fit is the only fact the listing adds, and our summary sticks to it.
What stands out
- Fits Photon Mono M7 and M7 Pro
- Original ANYCUBIC part
- Model USS020226-0427
Who it fits
Good fit for
Photon Mono M7 or M7 Pro owners whose platform is gouged or bent, or who want a spare to swap during cleaning.
Who should skip it
Owners of other Photon models, and anyone who wants a magnetic or flex plate rather than a stock one.
Verdict: The original spare platform for the M7 family.
Photon Mono M7 platform specs
M7 and M7 Pro
Listed fit.
USS020226-0427
Model code.
Black
Listed color.
Size and surface
Not stated.
A stock spare, not an upgrade
This plate matches the original, so expect the same grip and the same scraping routine. Owners who want parts to pop off by flexing will look at magnetic flex plates from other makers sold for the M7; those change the Z height and need releveling too. A stock spare suits anyone who simply needs a sound plate again.
Fitting it
Fix the platform on the Z arm, loosen the leveling screws, level against the screen with a sheet of paper and tighten. Use a plastic scraper to avoid gouges. Choose this plate for a like-for-like repair on an M7 or M7 Pro; choose a flex plate if part removal is the issue.
Before you order
Checks for the ANYCUBIC M7 build platform.
Check before you buy
- Your printer is a Photon Mono M7 or M7 Pro
- The current plate is gouged or bent
- You will relevel after fitting
- A stock surface is what you want
The product at a glance
ANYCUBIC Photon Mono M7 / M7 Pro Build Platform
Best for: Photon Mono M7 repairs
- Printing Technology
- Resin
- Color
- Black
View on Amazon: ANYCUBIC Photon Mono M7 / M7 Pro Build Platform Affiliate link
ANYCUBIC's original replacement platform for the Photon Mono M7 and M7 Pro, model USS020226-0427; no size or surface data.
Pros
- Fits both M7 and M7 Pro
- Original part
Cons
- Almost no specs
- Stock surface only
Good fit if
- Your M7 plate is damaged
- You want a spare
Skip if
- You want a flex plate
Verdict: A plain original spare for the M7 family.
Specifications side by side
| Spec | ANYCUBIC Photon Mono M7 / M7 Pro Build Platform |
|---|---|
| Printing Technology | Resin |
| Color | Black |
| Model | USS020226-0427 |
Frequently asked questions
Does the ANYCUBIC M7 platform fit the M7 Pro?
Yes, the listing names both the Photon Mono M7 and M7 Pro.
What size is the Photon Mono M7 platform?
The listing does not give dimensions.
Is the ANYCUBIC M7 build plate magnetic?
The listing does not say so; it is a stock replacement platform.
What is the model code of the M7 platform?
USS020226-0427.
Do I need to relevel after fitting the M7 platform?
Yes, level it against the screen before printing.
See also
- anycubic photon p1 dual color kit review
- phrozen cure mega s curing station review
- phrozen 15 inch build platform sonic mega 8k review
- anycubic 5pcs 10 1 inch acf high review
- anycubic kobra 3 v2 replacement printhead review
- ANYCUBIC Kobra 3 Max Printhead Assembly Review (2026): A Spec-Based Look
- ANYCUBIC FEP Film 2-Pack for Photon Mono 2 and Mono 4 Review: Specs, Pros and Cons
- ANYCUBIC Kobra 3 USB Monitoring Camera Review: Who It Fits and Who Should Skip It
- anycubic photon p1 14k resin 3d printer review
- timetec 256gb SSD 3d nand review
