ANYCUBIC Photon Mono 4 Build Platform Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The build platform is the plate a resin print hangs from, and it takes a beating: scrapers gouge it, and a warped or scratched plate leads to prints that will not stick or come off unevenly. This is ANYCUBIC's original replacement platform for the Photon Mono 4, in black. The listing is one line long and gives no dimensions, surface finish or mounting details, so it is a like-for-like spare, not an upgrade. The Mono 4's own listing gives a print volume of 6.04 × 3.42 × 6.49in, which this plate is made to cover. This summary comes from ANYCUBIC's listings.
What stands out
- Original ANYCUBIC Mono 4 platform
- Like-for-like spare
- One-line listing
Who it fits
Good fit for
Photon Mono 4 owners with a gouged, bent or damaged platform, or who want a spare to swap during cleaning.
Who should skip it
Owners of other Photon models, and anyone hoping for a textured or magnetic upgrade.
Verdict: A plain original spare for the Mono 4.
Photon Mono 4 platform specs
Photon Mono 4
Listed fit.
Black
Listed color.
6.04 × 3.42 × 6.49in
Printer's print volume.
Surface finish
Not stated.
Mounting details
Not stated.
When a new platform helps
If prints keep detaching from one area of the plate, check that it is level and clean first. A deep gouge or a bent plate cannot be fixed by leveling, and that is when a new one pays. A second platform also lets you leave one print to drain while you start the next, if you clean and level each plate before use.
Fitting it
Mount the platform on the Mono 4's arm, loosen its screws, run the printer's leveling routine with paper on the screen, then tighten. Use a plastic scraper to keep the new surface smooth. Choose this plate to replace a damaged original; choose a third-party magnetic flex plate if your goal is easier part removal.
Before you order
Checks for the Photon Mono 4 build platform.
Check before you buy
- Your printer is the Photon Mono 4
- The old plate is gouged or bent
- You will relevel after fitting
- You do not need a textured or magnetic surface
The product at a glance
ANYCUBIC Photon Mono 4 Printing Platform
Best for: Photon Mono 4 repairs
- Color
- Black
View on Amazon: ANYCUBIC Photon Mono 4 Printing Platform Affiliate link
ANYCUBIC's original replacement build platform for the Photon Mono 4, black; no size or surface data on the listing.
Pros
- Original Mono 4 part
- Restores a damaged setup
Cons
- Almost no specs
- Not an upgrade
Good fit if
- Your Mono 4 plate is damaged
- You want a spare
Skip if
- You want a magnetic flex plate
Verdict: A plain original spare.
Specifications side by side
| Spec | ANYCUBIC Photon Mono 4 Printing Platform |
|---|---|
| Color | Black |
Frequently asked questions
Does the Photon Mono 4 platform fit the Mono 4 Ultra?
Only the plain Mono 4 is named for this platform.
What size is the Photon Mono 4 build platform?
The part listing gives none; the Mono 4 prints up to 6.04 × 3.42 × 6.49in.
Is the ANYCUBIC Mono 4 platform textured?
The listing does not say.
Do I need to level the new Mono 4 platform?
Yes, run the leveling routine after mounting it.
Why keep a spare Mono 4 build plate?
To replace a damaged one or swap plates while one is being cleaned.
See also
- anycubic photon mono m7 build platform review
- anycubic photon p1 dual color kit review
- phrozen cure mega s curing station review
- anycubic 5pcs 10 1 inch acf high review
- anycubic kobra 3 v2 replacement printhead review
- ANYCUBIC Kobra 3 Max Printhead Assembly Review (2026): A Spec-Based Look
- ANYCUBIC FEP Film 2-Pack for Photon Mono 2 and Mono 4 Review: Specs, Pros and Cons
- ANYCUBIC Kobra 3 USB Monitoring Camera Review: Who It Fits and Who Should Skip It
- anycubic photon mono m7 max review
- kitchenaid kq909 dual platform digital review
